Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bi

Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv: add riscv-iommu-pci reference device

The RISC-V IOMMU can be modelled as a PCIe device following the
guidelines of the RISC-V IOMMU spec, chapter 7.1, "Integrating an IOMMU
as a PCIe devic

hw/riscv: add riscv-iommu-pci reference device

The RISC-V IOMMU can be modelled as a PCIe device following the
guidelines of the RISC-V IOMMU spec, chapter 7.1, "Integrating an IOMMU
as a PCIe device".

Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: add RISC-V IOMMU base emulation

The RISC-V IOMMU specification is now ratified as-per the RISC-V
international process. The latest frozen specifcation can be found at:

https://github.com/

hw/riscv: add RISC-V IOMMU base emulation

The RISC-V IOMMU specification is now ratified as-per the RISC-V
international process. The latest frozen specifcation can be found at:

https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf

Add the foundation of the device emulation for RISC-V IOMMU. It includes
support for s-stage (sv32, sv39, sv48, sv57 caps) and g-stage (sv32x4,
sv39x4, sv48x4, sv57x4 caps).

Other capabilities like ATS and DBG support will be added incrementally
in the next patches.

Co-developed-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20241016204038.649340-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* target/i386: miscellaneous changes, mostly TCG-related
* fix --without-default-devices build
* fix --without-default-device

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* target/i386: miscellaneous changes, mostly TCG-related
* fix --without-default-devices build
* fix --without-default-devices qtests on s390x and arm

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY+JWIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGmwf+JKY/i7ihXvfINQIRSKaz+H7KM3Br
# BGv/iXj4hrRA+zflcZswwoWmPrkrXM3J5JqGG6zTqqhGne+fRKt60KBFwn+lRaMY
# n48icR4zOSaEcGKBOFKs9CB1JgL7SWMe+fZ8d02amYlIZ005af0d69ACenF9r/oX
# pTxYIrR90FdZStbF4Yl0G5CzMLBdHZd/b6bMNmbefVPv3/d2zuL7VgqLX3y3J0ee
# ASYkYjn8Wpda4KX9s2rvH9ENXj80Q7EqhuDvoBlyK72/2lE5aTojbUiyGB4n5AuX
# 5OHA+0HEpuCXXToijOeDXD1NDOk9E5DP8cEwwZfZ2gjWKjja0U6OODGLVw==
# =woTe
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 May 2024 03:47:14 PM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (27 commits)
configs: disable emulators that require it if libfdt is not found
hw/xtensa: require libfdt
kconfig: express dependency of individual boards on libfdt
kconfig: allow compiling out QEMU device tree code per target
meson: move libfdt together with other dependencies
meson: pick libfdt from common_ss when building target-specific files
tests/qtest: arm: fix operation in a build without any boards or devices
i386: select correct components for no-board build
hw/i386: move rtc-reset-reinjection command out of hw/rtc
hw/i386: split x86.c in multiple parts
i386: pc: remove unnecessary MachineClass overrides
i386: correctly select code in hw/i386 that depends on other components
xen: register legacy backends via xen_backend_init
xen: initialize legacy backends from xen_bus_init()
tests/qtest: s390x: fix operation in a build without any boards or devices
s390x: select correct components for no-board build
s390: move css_migration_enabled from machine to css.c
s390_flic: add migration-enabled property
s390x: move s390_cpu_addr2state to target/s390x/sigp.c
sh4: select correct components for no-board build
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

meson: pick libfdt from common_ss when building target-specific files

Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependenc

meson: pick libfdt from common_ss when building target-specific files

Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv/virt: Enable basic ACPI infrastructure

Add basic ACPI infrastructure for RISC-V with below tables.
1) DSDT with below basic objects
- CPUs
- fw_cfg

hw/riscv/virt: Enable basic ACPI infrastructure

Add basic ACPI infrastructure for RISC-V with below tables.
1) DSDT with below basic objects
- CPUs
- fw_cfg
2) FADT revision 6 with HW_REDUCED flag
3) XSDT
4) RSDP

Add this functionality in a new file virt-acpi-build.c and enable
building this infrastructure.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge remote-tracking branch 'remotes/philmd/tags/kconfig-20210720' into staging

Kconfig patches queue

Various Kconfig patches collected during v6.1 development cycle.

# gpg: Signature made Tue 20

Merge remote-tracking branch 'remotes/philmd/tags/kconfig-20210720' into staging

Kconfig patches queue

Various Kconfig patches collected during v6.1 development cycle.

# gpg: Signature made Tue 20 Jul 2021 19:11:32 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/kconfig-20210720:
hw/tricore: fix inclusion of tricore_testboard
hw/ppc/Kconfig: Add dependency PEGASOS2 -> ATI_VGA
hw/isa/vt82c686: Add missing Kconfig dependency (runtime error)
hw/isa/vt82c686: Add missing Kconfig dependencies (build error)
hw/pci-host/Kconfig: Add missing dependency MV64361 -> I8259
hw/ppc/Kconfig: Add missing dependency E500 -> DS1338 RTC
hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines
hw/riscv/Kconfig: Add missing dependency MICROCHIP_PFSOC -> SERIAL
hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25
hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK Board
hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUS
hw/ide/Kconfig: Add missing dependency PCI -> IDE_QDEV
hw/i386/Kconfig: Add missing Kconfig dependency (runtime error)
hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)
hw/acpi: Do not restrict ACPI core routines to x86 architecture
hw/mips: Express dependencies of the Boston machine with Kconfig
hw/mips: Add dependency MIPS_CPS -> MIPS_ITU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines

Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
symbol and only have these machines select it. Adapt the Meson file
to on

hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machines

Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig
symbol and only have these machines select it. Adapt the Meson file
to only built it if required.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210515173716.358295-8-philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging

A large collection of RISC-V fixes, improvements and features

- Clenaup some left over v1.9 code
- D

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging

A large collection of RISC-V fixes, improvements and features

- Clenaup some left over v1.9 code
- Documentation improvements
- Support for the shakti_c machine
- Internal cleanup of the CSR accesses
- Updates to the OpenTitan platform
- Support for the virtio-vga
- Fix for the saturate subtract in vector extensions
- Experimental support for the ePMP spec
- A range of other internal code cleanups and bug fixes

# gpg: Signature made Tue 11 May 2021 11:17:10 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210511: (42 commits)
target/riscv: Fix the RV64H decode comment
target/riscv: Consolidate RV32/64 16-bit instructions
target/riscv: Consolidate RV32/64 32-bit instructions
target/riscv: Remove an unused CASE_OP_32_64 macro
target/riscv: Remove the unused HSTATUS_WPRI macro
target/riscv: Remove the hardcoded SATP_MODE macro
target/riscv: Remove the hardcoded MSTATUS_SD macro
target/riscv: Remove the hardcoded HGATP_MODE macro
target/riscv: Remove the hardcoded SSTATUS_SD macro
target/riscv: Remove the hardcoded RVXLEN macro
target/riscv: fix a typo with interrupt names
fpu/softfloat: set invalid excp flag for RISC-V muladd instructions
hw/riscv: Fix OT IBEX reset vector
target/riscv: fix exception index on instruction access fault
target/riscv: fix vrgather macro index variable type bug
target/riscv: Add ePMP support for the Ibex CPU
target/riscv/pmp: Remove outdated comment
target/riscv: Add a config option for ePMP
target/riscv: Implementation of enhanced PMP (ePMP)
target/riscv: Add ePMP CSR access functions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

riscv: Add initial support for Shakti C machine

Add support for emulating Shakti reference platform based on C-class
running on arty-100T board.

https://gitlab.com/shaktiproject/cores/shakti-soc/-/

riscv: Add initial support for Shakti C machine

Add support for emulating Shakti reference platform based on C-class
running on arty-100T board.

https://gitlab.com/shaktiproject/cores/shakti-soc/-/blob/master/README.rst

Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-3-vijai@behindbytes.com
[Changes by AF:
- Check for mstate->firmware before loading it
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allo

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/riscv/trace-events

show more ...

hw/riscv: Always build riscv_hart.c

Every RISC-V machine needs riscv_hart hence there is no need to
have a dedicated Kconfig option for it. Drop the Kconfig option
and always build riscv_hart.c.

Si

hw/riscv: Always build riscv_hart.c

Every RISC-V machine needs riscv_hart hence there is no need to
have a dedicated Kconfig option for it. Drop the Kconfig option
and always build riscv_hart.c.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-11-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_test model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_

hw/riscv: Move sifive_test model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_test model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_uart model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_

hw/riscv: Move sifive_uart model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_uart model to hw/char directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move riscv_htif model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_ht

hw/riscv: Move riscv_htif model to hw/char

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_htif model to hw/char directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_plic model to hw/intc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_

hw/riscv: Move sifive_plic model to hw/intc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_plic model to hw/intc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_clint model to hw/intc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive

hw/riscv: Move sifive_clint model to hw/intc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_clint model to hw/intc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_gpio model to hw/gpio

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_

hw/riscv: Move sifive_gpio model to hw/gpio

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_gpio model to hw/gpio directory.

Note this also removes the trace-events in the hw/riscv directory,
since gpio is the only supported trace target in that directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_u_otp model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive

hw/riscv: Move sifive_u_otp model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_otp model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_u_prci model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifiv

hw/riscv: Move sifive_u_prci model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_u_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Move sifive_e_prci model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifiv

hw/riscv: Move sifive_e_prci model to hw/misc

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_e_prci model to hw/misc directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board

This is an initial support for Microchip PolarFire SoC Icicle Kit.
The Icicle Kit board integrates a PolarFire SoC, with one Si

hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board

This is an initial support for Microchip PolarFire SoC Icicle Kit.
The Icicle Kit board integrates a PolarFire SoC, with one SiFive's
E51 plus four U54 cores and many on-chip peripherals and an FPGA.

For more details about Microchip PolarFire Soc, please see:
https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga

Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000.
The following perepherals are created as an unimplemented device:

- Bus Error Uint 0/1/2/3/4
- L2 cache controller
- SYSREG
- MPUCFG
- IOSCBCFG

More devices will be added later.

The BIOS image used by this machine is hss.bin, aka Hart Software
Services, which can be built from:
https://github.com/polarfire-soc/hart-software-services

To launch this machine:
$ qemu-system-riscv64 -nographic -M microchip-icicle-kit

The memory is set to 1 GiB by default to match the hardware.
A sanity check on ram size is performed in the machine init routine
to prompt user to increase the RAM size to > 1 GiB when less than
1 GiB ram is detected.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

meson related:
* convert unit tests
* bugfixes for mtest2make
* miscellaneous bugfixes
* dead code removal and co

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

meson related:
* convert unit tests
* bugfixes for mtest2make
* miscellaneous bugfixes
* dead code removal and configure cleanups
* oss-fuzz fixes
* msys fixes

# gpg: Signature made Tue 08 Sep 2020 10:43:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (45 commits)
docs: update build system documentation
meson: remove linkage of sdl to baum
meson: Convert undefsym.sh to undefsym.py
fuzz: Add support for custom fuzzing library
meson: specify fuzz linker script as a project arg
oss-fuzz: fix rpath
configure: update dtc submodule
docs: suggest Meson replacements for various configure functions
configure: drop dead variables and functions
configure: do not include dependency flags in QEMU_CFLAGS and LIBS
meson: get opengl compilation flags from OPENGL_CFLAGS
meson: get glib compilation flags from GLIB_CFLAGS
configure: do not look for install(1)
configure: remove unnecessary libm test
configure: move -ldl test to meson
meson: keep all compiler flags detection together
configure: move disassembler configuration to meson
Makefile: inline the relevant parts of rules.mak
Makefile: remove dead variables and includes
meson: compute config_all_devices directly
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

configure: do not include dependency flags in QEMU_CFLAGS and LIBS

All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefile

configure: do not include dependency flags in QEMU_CFLAGS and LIBS

All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.

In a few cases the dependencies were not yet specified, so add them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...