pci: ensure valid link status bits for downstream ports

PCI hotplug for downstream endpoints on arm fails because Linux'
PCIe hotplug driver doesn't like the QEMU provided LNKSTA:

pcieport 0000:0

pci: ensure valid link status bits for downstream ports

PCI hotplug for downstream endpoints on arm fails because Linux'
PCIe hotplug driver doesn't like the QEMU provided LNKSTA:

pcieport 0000:08:01.0: pciehp: Slot(2): Card present
pcieport 0000:08:01.0: pciehp: Slot(2): Link Up
pcieport 0000:08:01.0: pciehp: Slot(2): Cannot train link: status 0x2000

There's 2 cases where LNKSTA isn't setup properly:
* the downstream device has no express capability
* max link width of the bridge is 0

Move the sanity checks added via 88c869198aa63
("pci: Sanity test minimum downstream LNKSTA") outside of the
branch to make sure downstream ports always have a valid LNKSTA.

Signed-off-by: Sebastian Ott <sebott@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20241203121928.14861-1-sebott@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 694632fd44987cc4618612a38ad151047524a590)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, fixes, cleanups

CXL now can use Generic Port Affinity Structures.
CXL now allows c

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, fixes, cleanups

CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug

Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
# fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
# 46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
# HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
# +DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
# OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
# =zSX4
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 21:03:33 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (65 commits)
intel_iommu: Add missed reserved bit check for IEC descriptor
intel_iommu: Add missed sanity check for 256-bit invalidation queue
intel_iommu: Send IQE event when setting reserved bit in IQT_TAIL
hw/acpi: Update GED with vCPU Hotplug VMSD for migration
tests/qtest/bios-tables-test: Update DSDT golden masters for x86/{pc,q35}
hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states
qtest: allow ACPI DSDT Table changes
hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug
hw/pci: Add parenthesis to PCI_BUILD_BDF macro
hw/cxl: Ensure there is enough data to read the input header in cmd_get_physical_port_state()
hw/cxl: Ensure there is enough data for the header in cmd_ccls_set_lsa()
hw/cxl: Check that writes do not go beyond end of target attributes
hw/cxl: Ensuring enough data to read parameters in cmd_tunnel_management_cmd()
hw/cxl: Avoid accesses beyond the end of cel_log.
hw/cxl: Check the length of data requested fits in get_log()
hw/cxl: Check enough data in cmd_firmware_update_transfer()
hw/cxl: Check input length is large enough in cmd_events_clear_records()
hw/cxl: Check input includes at least the header in cmd_features_set_feature()
hw/cxl: Check size of input data to dynamic capacity mailbox commands
hw/cxl/cxl-mailbox-util: Fix output buffer index update when retrieving DC extents
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pcie: enable Extended tag field support

>From what I read PCI has 32 transactions, PCI Express devices can handle
256 with Extended tag enabled (spec mentions also larger values but I
lack PCIe know

pcie: enable Extended tag field support

>From what I read PCI has 32 transactions, PCI Express devices can handle
256 with Extended tag enabled (spec mentions also larger values but I
lack PCIe knowledge).

QEMU leaves 'Extended tag field' with 0 as value:

Capabilities: [e0] Express (v1) Root Complex Integrated Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset- TEE-IO-

SBSA ACS has test 824 which checks for PCIe device capabilities. BSA
specification [1] (SBSA is on top of BSA) in section F.3.2 lists
expected values for Device Capabilities Register:

Device Capabilities Register Requirement
Role based error reporting RCEC and RCiEP: Hardwired to 1
Endpoint L0s acceptable latency RCEC and RCiEP: Hardwired to 0
L1 acceptable latency RCEC and RCiEP: Hardwired to 0
Captured slot power limit scale RCEC and RCiEP: Hardwired to 0
Captured slot power limit value RCEC and RCiEP: Hardwired to 0
Max payload size value must be compliant with PCIe spec
Phantom functions RCEC and RCiEP: Recommendation is to
hardwire this bit to 0.
Extended tag field Hardwired to 1

1. https://developer.arm.com/documentation/den0094/c/

This change enables Extended tag field. All versioned platforms should
have it disabled for older versions (tested with Arm/virt).

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20241023113820.486017-1-marcin.juszkiewicz@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/pcie: Provide a utility function for control of EP / SW USP link

Whilst similar to existing PCIESlot link configuration a few registers
need to be set differently so that the downstream device pr

hw/pcie: Provide a utility function for control of EP / SW USP link

Whilst similar to existing PCIESlot link configuration a few registers
need to be set differently so that the downstream device presents
a 'configured' state that is then used to 'train' the upstream port
on the link. Basically that means setting the status register to
reflect it succeeding in training up to target settings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

hw/pcie: Factor out PCI Express link register filling common to EP.

Whilst not all link related registers are common between RP / Switch DSP
and EP / Switch USP many of them are. Factor that group

hw/pcie: Factor out PCI Express link register filling common to EP.

Whilst not all link related registers are common between RP / Switch DSP
and EP / Switch USP many of them are. Factor that group out to save
on duplication when adding EP / Swtich USP configurability.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

more memslots support in libvhost-user
support PCIe Gen5/Gen6 link

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic

fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/core/machine.c

show more ...

pcie: Support PCIe Gen5/Gen6 link speeds

This patch extends the PCIe link speed option so that slots can be
configured as supporting 32GT/s (Gen5) or 64GT/s (Gen5) speeds.
This is as simple as setti

pcie: Support PCIe Gen5/Gen6 link speeds

This patch extends the PCIe link speed option so that slots can be
configured as supporting 32GT/s (Gen5) or 64GT/s (Gen5) speeds.
This is as simple as setting the appropriate bit in LnkCap2 and
the appropriate value in LnkCap and LnkCtl2.

Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Message-Id: <20240215012326.3272366-1-lstockner@genesiscloud.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'hw-misc-20240312' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (

Merge tag 'hw-misc-20240312' of https://github.com/philmd/qemu into staging

Misc HW patch queue

- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (Vladimir)
- Short CLI option to add drives for sam460ex machine (Zoltan)
- More missing ERRP_GUARD() macros (Zhao)
- Avoid faulting when unmapped I/O BAR is accessed on SPARC EBUS (Mark)
- Remove unused includes in hw/core/ (Zhao)
- New PCF8574 GPIO over I2C model (Dmitriy)
- Require ObjC on Darwin macOS by default (Peter)
- Corrected "-smp parameter=1" placement in docs/ (Zhao)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXwEJkACgkQ4+MsLN6t
# wN4A3hAAngVu7VmyrfqYF6jfDMUuRGYaKf4D73/KF6R1PsU+nJdN7UAkECLj8o7g
# mkcAQu1U3fKCUssF6MJ2a3kU+rD1OkkA/ZcitzgWwEjCK8KVjtMt2HzEqX+B/X+e
# RUVjXMOMkyV48MF0+yLhJz+lQiDpEBFVxIgssPBNUz1Pw9IfoXp29Bfz+bYBThS4
# ywAdvCefNzSira0Nt6RWTnvgBHB/1+aLy1uMSt0Xu926zcqoxQJ0b//0flYL8vAf
# JuSSZuiXPw+oAc3qG3d6aPl3g8DrFn3pvPD471KlFQAnB0dlhEZZqNBPvraySpHl
# h04Y8teHYj9XfxPtaWfaEdgQCazdkKFR/q7E5c9GU00Rf469BJeuo9Pzkm4kWfbU
# sbCl8em5biVZ5DpBIOMT3/D0JOyGf7/CM8y5c3Jc92hapx2NdSszkvCicrDE1+i0
# zEr4N0P/F2x5KFVFkQ3Xzv2Jtzw+iXj6kSE5a5/64GMK29Mqu/EPaSkvwGDQOs3N
# QJ9mpa4gg47g310a0/nH0i5eVbvGVuzcCMP6VXOBVr18cJ7JFQFFiYcvoTDXNQ2m
# sq5xUelRimnWfKpawomJXkS+/j0usH61/aQBuDKfj45i8/XFRejCIk0gMWQ9hjyD
# no1HqDN8CVXtiPNSinC7ctNHU5ClS0xO/BRl0h3PGC7Bl+A2eVY=
# =JQg1
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 08:21:45 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* tag 'hw-misc-20240312' of https://github.com/philmd/qemu:
docs/about/deprecated.rst: Move SMP configurations item to system emulator section
meson.build: Always require an objc compiler on macos hosts
hw/gpio: introduce pcf8574 driver
hw/core: Cleanup unused included headers in numa.c
hw/core: Cleanup unused included header in machine-qmp-cmds.c
hw/core: Cleanup unused included headers in cpu-common.c
sun4u: remap ebus BAR0 to use unassigned_io_ops instead of alias to PCI IO space
hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()
hw/core/qdev-properties-system: Fix missing ERRP_GUARD() for error_prepend()
hw/core/loader-fit: Fix missing ERRP_GUARD() for error_prepend()
hw/ppc/sam460ex: Support short options for adding drives
hw/pci: add some convenient trace-events for pcie and shpc hotplug
hw/ide/ahci: Rename ahci_internal.h to ahci-internal.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/pci: add some convenient trace-events for pcie and shpc hotplug

Add trace-events that may help to debug problems with hotplugging.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-

hw/pci: add some convenient trace-events for pcie and shpc hotplug

Add trace-events that may help to debug problems with hotplugging.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240301154146.761531-2-vsementsov@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,pci,virtio: cleanups, fixes, features

vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,pci,virtio: cleanups, fixes, features

vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq

cleanups, fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

pcie: Specify 0 for ARI next function numbers

The current implementers of ARI are all SR-IOV devices. The ARI next
function number field is undefined for VF according to PCI Express Base
Specificati

pcie: Specify 0 for ARI next function numbers

The current implementers of ARI are all SR-IOV devices. The ARI next
function number field is undefined for VF according to PCI Express Base
Specification Revision 5.0 Version 1.0 section 9.3.7.7. The PF still
requires some defined value so end the linked list formed with the field
by specifying 0 as required for any ARI implementation according to
section 7.8.7.2.

For migration, the field will keep having 1 as its value on the old
QEMU machine versions.

Fixes: 2503461691 ("pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt")
Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV")
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-3-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie: Use common ARI next function number

Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.

Signed-off-by: Akihiko Odaki <akihik

pcie: Use common ARI next function number

Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie: Add hotplug detect state register to cmask

When trying to migrate a machine type pc-q35-6.0 or lower, with this
cmdline options,

-device driver=pcie-root-port,port=18,chassis=19,id=pcie-root-

pcie: Add hotplug detect state register to cmask

When trying to migrate a machine type pc-q35-6.0 or lower, with this
cmdline options,

-device driver=pcie-root-port,port=18,chassis=19,id=pcie-root-port18,bus=pcie.0,addr=0x12 \
-device driver=nec-usb-xhci,p2=4,p3=4,id=nex-usb-xhci0,bus=pcie-root-port18,addr=0x12.0x1

the following bug happens after all ram pages were sent:

qemu-kvm: get_pci_config_device: Bad config data: i=0x6e read: 0 device: 40 cmask: ff wmask: 0 w1cmask:19
qemu-kvm: Failed to load PCIDevice:config
qemu-kvm: Failed to load pcie-root-port:parent_obj.parent_obj.parent_obj
qemu-kvm: error while loading state for instance 0x0 of device '0000:00:12.0/pcie-root-port'
qemu-kvm: load of migration failed: Invalid argument

This happens on pc-q35-6.0 or lower because of:
{ "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }

In this scenario, hotplug_handler_plug() calls pcie_cap_slot_plug_cb(),
which sets dev->config byte 0x6e with bit PCI_EXP_SLTSTA_PDS to signal PCI
hotplug for the guest. After a while the guest will deal with this hotplug
and qemu will clear the above bit.

Then, during migration, get_pci_config_device() will compare the
configs of both the freshly created device and the one that is being
received via migration, which will differ due to the PCI_EXP_SLTSTA_PDS bit
and cause the bug to reproduce.

To avoid this fake incompatibility, there are tree fields in PCIDevice that
can help:

- wmask: Used to implement R/W bytes, and
- w1cmask: Used to implement RW1C(Write 1 to Clear) bytes
- cmask: Used to enable config checks on load.

According to PCI Express® Base Specification Revision 5.0 Version 1.0,
table 7-27 (Slot Status Register) bit 6, the "Presence Detect State" is
listed as RO (read-only), so it only makes sense to make use of the cmask
field.

So, clear PCI_EXP_SLTSTA_PDS bit on cmask, so the fake incompatibility on
get_pci_config_device() does not abort the migration.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215819
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230706045546.593605-3-leobras@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>

show more ...

Merge tag 'pull-vfio-20230710' of https://github.com/legoater/qemu into staging

vfio queue:

* Fixes in error handling paths of VFIO PCI devices
* Improvements of reported errors for VFIO migration

Merge tag 'pull-vfio-20230710' of https://github.com/legoater/qemu into staging

vfio queue:

* Fixes in error handling paths of VFIO PCI devices
* Improvements of reported errors for VFIO migration
* Linux header update
* Enablement of AtomicOps completers on root ports
* Fix for unplug of passthrough AP devices

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmSrug0ACgkQUaNDx8/7
# 7KHYCRAAt6UeZi8nKPlN+cs6guOagCcAJOu13nm7XN0bFxjYf/Q2t618cpM7PLSk
# h+4VGsMUVJ1dumcCkBmv7LAn0G6CpVR3VDi5QuGfMODRhpWfSoaypPIizRgrbarL
# lSyaVaPIaddlDZ4AIfFA9Ebnytvm5/ecsyTr0cv7OejVKWI/jN6bC/v36AmNQKKQ
# J5RCDpQ6fOsdqf0Dzvn7xjuHRE4DYtsWkVoslDoBQMgPWHLF8UwRu/OPD6cBQYAR
# /fmgoOkkNDMdN3laqwAyfAUjKfOFpLuZzJ5KNFjtkBiktm66dw4Y8/lWoChVR+S6
# PRZ3nk0HxyzB96zCytfggBX905PBD54LIuockRaYKTlTxT19C3fDjDz5tsjKNhLR
# aFec4KiJaUJj0fa/Vw8DB/WUbCgbOXGHiWhY8vNdpVoc9AZe8xj9z4nB3hmzx1i/
# lZhsM/s3kTNHpVGlW7vTfbToFBmt1eoglu+ILe/HeHLi8LjzCsHy+wR5c0n0/HVI
# fLUuUS1AGQvi8+HCCUi7gwzpJkl4rPJsPx51wfXJk+q/3GQ8g9Mg9qotHNHm4N60
# zq/I5VqqEkJzdaMjup04ZqsMAWqGrnU2f4aNPvBhgaeO9CQE/buIsA34buQRwiG4
# wTodqm0jrkx0Z59jliZ0mFU/LxMvhMaQCEh+OdyZ9vRtfLBjF4c=
# =U2Hc
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 08:58:05 AM BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* tag 'pull-vfio-20230710' of https://github.com/legoater/qemu:
vfio/pci: Enable AtomicOps completers on root ports
pcie: Add a PCIe capability version helper
s390x/ap: Wire up the device request notifier interface
linux-headers: update to v6.5-rc1
vfio: Fix null pointer dereference bug in vfio_bars_finalize()
vfio/migration: Return bool type for vfio_migration_realize()
vfio/migration: Remove print of "Migration disabled"
vfio/migration: Free resources when vfio_migration_realize fails
vfio/migration: Change vIOMMU blocker from global to per device
vfio/pci: Disable INTx in vfio_realize error path
hw/vfio/pci-quirks: Sanitize capability pointer

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

pcie: Add a PCIe capability version helper

Report the PCIe capability version for a device

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

pcie: Add a PCIe capability version helper

Report the PCIe capability version for a device

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

vhost-user support without ioeventfd
word replacements in vhost us

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements

cleanups, fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pcie: set power indicator to off on reset by default

It should not be zero, the only valid values are ON, OFF and BLINK.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Revi

pcie: set power indicator to off on reset by default

It should not be zero, the only valid values are ON, OFF and BLINK.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-13-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie: introduce pcie_sltctl_powered_off() helper

In pcie_cap_slot_write_config() we check for PCI_EXP_SLTCTL_PWR_OFF in
a bad form. We should distinguish PCI_EXP_SLTCTL_PWR which is a "mask"
and PCI

pcie: introduce pcie_sltctl_powered_off() helper

In pcie_cap_slot_write_config() we check for PCI_EXP_SLTCTL_PWR_OFF in
a bad form. We should distinguish PCI_EXP_SLTCTL_PWR which is a "mask"
and PCI_EXP_SLTCTL_PWR_OFF which is value for that mask.

Better code is in pcie_cap_slot_unplug_request_cb() and in
pcie_cap_update_power(). Let's use same pattern everywhere. To simplify
things add also a helper.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-12-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie: pcie_cap_slot_enable_power() use correct helper

*_by_mask() helpers shouldn't be used here (and that's the only one).
*_by_mask() helpers do shift their value argument, but in pcie.c code
we u

pcie: pcie_cap_slot_enable_power() use correct helper

*_by_mask() helpers shouldn't be used here (and that's the only one).
*_by_mask() helpers do shift their value argument, but in pcie.c code
we use values that are already shifted appropriately.
Happily, PCI_EXP_SLTCTL_PWR_ON is zero, so shift doesn't matter. But if
we apply same helper for PCI_EXP_SLTCTL_PWR_OFF constant it will do
wrong thing.

So, let's use instead pci_word_test_and_clear_mask() which is already
used in the file to clear PCI_EXP_SLTCTL_PWR_OFF bit in
pcie_cap_slot_init() and pcie_cap_slot_reset().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-11-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie_regs: drop duplicated indicator value macros

We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we al

pcie_regs: drop duplicated indicator value macros

We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we already have usage of
PCI_EXP_SLTCTL_PWR_IND_BLINK and PCI_EXP_SLTCTL_PWR_IND_OFF in
hw/pci/pcie.c, so let's be consistent)

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-9-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

pcie: pcie_cap_slot_write_config(): use correct macro

PCI_EXP_SLTCTL_PIC_OFF is a value, and PCI_EXP_SLTCTL_PIC is a mask.
Happily PCI_EXP_SLTCTL_PIC_OFF is a maximum value for this mask and is
equa

pcie: pcie_cap_slot_write_config(): use correct macro

PCI_EXP_SLTCTL_PIC_OFF is a value, and PCI_EXP_SLTCTL_PIC is a mask.
Happily PCI_EXP_SLTCTL_PIC_OFF is a maximum value for this mask and is
equal to the mask itself. Still the code looks like a bug. Let's make
it more reader-friendly.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

lots of fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@re

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

lots of fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmPYJdcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp08cIAMYq0y++RtepDpLnPjybR0v1G4cPgZS4DXFz
# 8uc/2nkAHe1Q2lJNmk9p3YjLLloSO8yC1bmuuhUpmry9BJokYzY1r7rfXc8jd/Za
# z2FjC9LuYX+sk26NTGUxPq9mhT0p14HXyoxpnQlCweuVL0DJg1Tip6HI4oOG2LJj
# Au6Rl9keMQNqf9qVtsR1djO+8nO4ywbx6D9d2CYSKkQ3pK3uLvNds9vqU16x8wq7
# mNPqV8BIoDgW4zEOL478h6rJcL7pDQo6kAT1wfg7q1JcMMHJfW36VcBeFfskfJFg
# Pej3TEP2rg1LsGfh5XVw5Rp6FZ4K2TEyTK9cPZ9F7CzKdUrgBHU=
# =S0zd
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 Jan 2023 20:17:27 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (56 commits)
docs/pcie.txt: Replace ioh3420 with pcie-root-port
Revert "vhost-user: Introduce nested event loop in vhost_user_read()"
Revert "vhost-user: Monitor slave channel in vhost_user_read()"
tests/qtest/bios-tables-test: Make the test less verbose by default
hw: Use TYPE_PCI_BUS definition where appropriate
vhost-user: Skip unnecessary duplicated VHOST_USER_ADD/REM_MEM_REG requests
tests: acpi: update expected blobs
pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path
tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path
tests: acpi: update expected blobs
pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots
tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges
tests: acpi: update expected blobs
pcihp: acpi: decouple hotplug and generic slots description
tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description
pcihp: isolate rule whether slot should be described in DSDT
pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier"
pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml
pci: acpi: wire up AcpiDevAmlIf interface to generic bridge
x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap

When ACPI PCI hotplug for Q35 was introduced (6.1), it was implemented
by hiding HPC capability on PCIE slot. That ho

pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-cap

When ACPI PCI hotplug for Q35 was introduced (6.1), it was implemented
by hiding HPC capability on PCIE slot. That however led to a number of
regressions and to fix it, it was decided to keep HPC cap exposed
in ACPI PCI hotplug case and force guest in ACPI PCI hotplug mode
by other means [1].

That reduced meaning of x-native-hotplug to a compat knob [2] for
broken 6.1 machine type.
Rename property to match its current purpose.

1) 211afe5c69 (hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC)
2) c318bef762 (hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type)

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'pull-ppc-20220420-2' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-04-20

First batch of ppc patches for QEMU 7.1:

- skiboot firmware version bump
- pseries:

Merge tag 'pull-ppc-20220420-2' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-04-20

First batch of ppc patches for QEMU 7.1:

- skiboot firmware version bump
- pseries: add 2M DDW pagesize
- pseries: make virtual hypervisor code TCG only
- powernv: introduce GPIO lines for PSIHB device
- powernv: remove PCIE root bridge LSI
- target/ppc: alternative softfloat 128 bit integer support
- assorted fixes

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYmB/ngAKCRA82cqW3gMx
# ZE10AP4wPeJQ3fxXb5ylVtL4qkJaLWy6VrJBQSKSb5YEA0fhegEA9ZufpnENQePU
# gZF0eFAQK/DbSnDyvRQVpGcJM0K1UgI=
# =nVRw
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 02:48:14 PM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Can't check signature: No public key

* tag 'pull-ppc-20220420-2' of https://gitlab.com/danielhb/qemu: (23 commits)
hw/ppc: change indentation to spaces from TABs
target/ppc: Add two missing register callbacks on POWER10
ppc/pnv: Remove LSI on the PCIE host bridge
pcie: Don't try triggering a LSI when not defined
ppc/vof: Fix uninitialized string tracing
hw/ppc/ppc405_boards: Initialize g_autofree pointer
target/ppc: implement xscvqp[su]qz
target/ppc: implement xscv[su]qqp
softfloat: add float128_to_int128
softfloat: add float128_to_uint128
softfloat: add int128_to_float128
softfloat: add uint128_to_float128
qemu/int128: add int128_urshift
target/ppc: Improve KVM hypercall trace
spapr: Move nested KVM hypercalls under a TCG only config.
spapr: Move hypercall_register_softmmu
ppc/pnv: Remove useless checks in set_irq handlers
ppc/pnv: Remove PnvPsiClas::irq_set
ppc/pnv: Remove PnvOCC::psi link
ppc/pnv: Remove PnvLpcController::psi link
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

pcie: Don't try triggering a LSI when not defined

This patch skips [de]asserting a LSI interrupt if the device doesn't
have any LSI defined. Doing so would trigger an assert in
pci_irq_handler().

T

pcie: Don't try triggering a LSI when not defined

This patch skips [de]asserting a LSI interrupt if the device doesn't
have any LSI defined. Doing so would trigger an assert in
pci_irq_handler().

The PCIE root port implementation in qemu requests a LSI (INTA), but a
subclass may want to change that behavior since it's a valid
configuration. For example on the POWER8/POWER9/POWER10 systems, the
root bridge doesn't request any LSI.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220408131303.147840-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

show more ...