Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Conside

Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc: riscv-imsic: Fix interrupt state updates.

The IMSIC state variable eistate[] is modified by CSR instructions
within a range dedicated to the local CPU and by MMIO writes from any CPU.
Acces

hw/intc: riscv-imsic: Fix interrupt state updates.

The IMSIC state variable eistate[] is modified by CSR instructions
within a range dedicated to the local CPU and by MMIO writes from any CPU.
Access to eistate from MMIO accessors is protected by the BQL, but
read-modify-write (RMW) sequences from CSRRW do not acquire the BQL,
making the RMW sequence vulnerable to a race condition with MMIO access
from a remote CPU.

This race can manifest as missing IPI or MSI in multi-CPU systems, eg:

[ 43.008092] watchdog: BUG: soft lockup - CPU#2 stuck for 27s! [kworker/u19:1:52]
[ 43.011723] CPU: 2 UID: 0 PID: 52 Comm: kworker/u19:1 Not tainted 6.11.0-rc6
[ 43.013070] Workqueue: events_unbound deferred_probe_work_func
[ 43.018776] [<ffffffff800b4a86>] smp_call_function_many_cond+0x190/0x5c2
[ 43.019205] [<ffffffff800b4f28>] on_each_cpu_cond_mask+0x20/0x32
[ 43.019447] [<ffffffff8001069a>] __flush_tlb_range+0xf2/0x190
[ 43.019683] [<ffffffff80010914>] flush_tlb_kernel_range+0x20/0x28

The interrupt line raise/lower sequence was changed to prevent a race
between the evaluation of the eistate and the execution of the qemu_irq
raise/lower, ensuring that the interrupt line is not incorrectly
deactivated based on a stale topei check result. To avoid holding BQL
all modifications of eistate are converted to atomic operations.

Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a7604e4d61068ca4d384ae2a1377e1521d4d0235.1725651699.git.tjeznach@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXA

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWPOFsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8cCQgAnQjy3Ic1i225AElh
# 0Ph3Aiw6WT9pECLoKmyroxHbTGuaEJoIXeaOhMAnowCTBLoKRR3/Ooq0DGOW+l/Z
# f5PwWSkjkb+OcS+dj/kgQBu58/Gk5G8ogksqKQvci8k2okhjHmITSQDu0dtwzDZr
# jVGh3gmGoat73jQyD/nAwgWFawlLkklOMR/yvnFX7EJIBepRVbkMPayoKlB+6W07
# 1kqhSwoI0vQCjhJ3Q7Q0GC4rrHK3KUq7o/25yvICf4EgPKfsaym1wAjDhdKToixl
# 9T+ALZG8SiZZkBlb6l3QZ7pqtqavxYtPdZ2Gx/nMu0RRu4G33d5AVGHRrXj9qttW
# 5mL7ZQ==
# =uQ4C
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Dec 2023 21:21:31 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-20231230' of https://gitlab.com/rth7680/qemu: (71 commits)
docs: Constify VMstate in examples
tests/unit/test-vmstate: Constify VMState
util/fifo8: Constify VMState
replay: Constify VMState
system: Constify VMState
migration: Constify VMState
cpu-target: Constify VMState
backends: Constify VMState
audio: Constify VMState
hw/misc/macio: Constify VMState
hw/watchdog: Constify VMState
hw/virtio: Constify VMState
hw/vfio: Constify VMState
hw/usb: Constify VMState
hw/tpm: Constify VMState
hw/timer: Constify VMState
hw/ssi: Constify VMState
hw/sparc: Constify VMState
hw/sensor: Constify VMState
hw/sd: Constify VMState
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-35-richard.henderson@linaro.org>

Merge tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu into staging

accel: Introduce AccelClass::cpu_common_[un]realize
accel: Target agnostic code movement
accel/tcg: Cleanups to use CPUS

Merge tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu into staging

accel: Introduce AccelClass::cpu_common_[un]realize
accel: Target agnostic code movement
accel/tcg: Cleanups to use CPUState instead of CPUArchState
accel/tcg: Move CPUNegativeOffsetState into CPUState
tcg: Split out tcg init functions to tcg/startup.h
linux-user/hppa: Fix struct target_sigcontext layout
build: Remove --enable-gprof

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmUdsL4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/iYggAvDJEyMCAXSSH97BA
# wZT/2D/MFIhOMk6xrQRnrXfrG70N0iVKz44jl9j7k1D+9BOHcso//DDJH3c96k9A
# MgDb6W2bsWvC15/Qw6BALf5bb/II0MJuCcQvj3CNX5lNkXAWhwIOBhsZx7V9ST1+
# rihN4nowpRWdV5GeCjDGaJW455Y1gc96hICYHy6Eqw1cUgUFt9vm5aYU3FHlat29
# sYRaVYKUL2hRUPPNcPiPq0AaJ8wN6/s8gT+V1UvTzkhHqskoM4ZU89RchuXVoq1h
# SvhKElyULMRzM7thWtpW8qYJPj4mxZsKArESvHjsunGD6KEz3Fh1sy6EKRcdmpG/
# II1vkg==
# =k2Io
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 14:36:46 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu: (47 commits)
tcg/loongarch64: Fix buid error
tests/avocado: Re-enable MIPS Malta tests (GitLab issue #1884 fixed)
build: Remove --enable-gprof
linux-user/hppa: Fix struct target_sigcontext layout
tcg: Split out tcg init functions to tcg/startup.h
tcg: Remove argument to tcg_prologue_init
accel/tcg: Make cpu-exec-common.c a target agnostic unit
accel/tcg: Make icount.o a target agnostic unit
accel/tcg: Make monitor.c a target-agnostic unit
accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h'
exec: Rename target specific page-vary.c -> page-vary-target.c
exec: Rename cpu.c -> cpu-target.c
accel: Rename accel-common.c -> accel-target.c
accel: Make accel-blocker.o target agnostic
accel/tcg: Restrict dump_exec_info() declaration
exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h'
exec: Make EXCP_FOO definitions target agnostic
accel/tcg: move ld/st helpers to ldst_common.c.inc
accel/tcg: Unify user and softmmu do_[st|ld]*_mmu()
accel/tcg: Remove env_tlb()
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

accel/tcg: Replace CPUState.env_ptr with cpu_env()

Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.2

* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
*

Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging

First RISC-V PR for 8.2

* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: update APLIC and IMSIC to support KVM AIA

KVM AIA can't emulate APLIC only. When "aia=aplic" parameter is passed,
APLIC devices is emulated by QEMU. For "aia=aplic-imsic", remove the
m

target/riscv: update APLIC and IMSIC to support KVM AIA

KVM AIA can't emulate APLIC only. When "aia=aplic" parameter is passed,
APLIC devices is emulated by QEMU. For "aia=aplic-imsic", remove the
mmio operations of APLIC when using KVM AIA and send wired interrupt
signal via KVM_IRQ_LINE API.
After KVM AIA enabled, MSI messages are delivered by KVM_SIGNAL_MSI API
when the IMSICs receive mmio write requests.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-5-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been

Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging

Sixth RISC-V PR for 8.0

* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: intc: Use cpu_by_arch_id to fetch CPU state

Qemu_get_cpu uses the logical CPU id assigned during init to fetch the
CPU state. However APLIC, IMSIC and ACLINT contain registers and states
which a

hw: intc: Use cpu_by_arch_id to fetch CPU state

Qemu_get_cpu uses the logical CPU id assigned during init to fetch the
CPU state. However APLIC, IMSIC and ACLINT contain registers and states
which are specific to physical hart Ids. The hart Ids in any given system
might be sparse and hence calls to qemu_get_cpu need to be replaced by
cpu_by_arch_id which performs lookup based on the sparse physical hart IDs.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230303065055.915652-3-mchitale@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 7.2

* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if

Merge tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 7.2

* Update [m|h]tinst CSR in interrupt handling
* Force disable extensions if priv spec version does not match
* fix shifts shamt value for rv128c
* move zmmul out of the experimental
* virt: pass random seed to fdt
* Add checks for supported extension combinations
* Upgrade OpenSBI to v1.1
* Fix typo and restore Pointer Masking functionality for RISC-V
* Add mask agnostic behaviour (rvv_ma_all_1s) for vector extension
* Add Zihintpause support
* opentitan: bump opentitan version
* microchip_pfsoc: fix kernel panics due to missing peripherals
* Remove additional priv version check for mcountinhibit
* virt machine device tree improvements
* Add xicondops in ISA entry
* Use official extension names for AIA CSRs

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmMYUCUACgkQIeENKd+X
# cFRpEQf/T1FFcGq3TZrEPmqMdFPUSb+SEJNgwYFfloqkNjB2HIFbd2tKWAE1Tgjr
# esV00p7YPyox1Ct+fKdwSxDxRSN9OI56v+nI8ZFwluVu7vpChuTFmOHur8rNxl1T
# 8MZgP2kMxMOJSnyHCS2iV9AUFdTExS65DbmlAKzi5fpBtt9jYTPSXsI49MP8+Ku/
# 1gdv5ZF5BXDJsGs7xHvE92dRzQEVN+As64IjlknFHHpmCM1b+Ah3GekXUbKmBuDG
# /NaZyZNPCYxdRmPm/D7k0SOMZSJ9sLyhXTetZ0ZpBxG1ioClX37yS5wn4NLsCz/2
# fXrnML+MQFUKZ03AZ9lWvxcu7kXfWA==
# =7mGD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Sep 2022 04:02:45 EDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220907' of https://github.com/alistair23/qemu: (44 commits)
target/riscv: Update the privilege field for sscofpmf CSRs
hw/riscv: virt: Add PMU DT node to the device tree
target/riscv: Add few cache related PMU events
target/riscv: Simplify counter predicate function
target/riscv: Add sscofpmf extension support
target/riscv: Add vstimecmp support
target/riscv: Add stimecmp support
hw/intc: Move mtimer/mtimecmp to aclint
target/riscv: Use official extension names for AIA CSRs
target/riscv: Add xicondops in ISA entry
hw/core: fix platform bus node name
hw/riscv: virt: fix syscon subnode paths
hw/riscv: virt: fix the plic's address cells
hw/riscv: virt: fix uart node name
target/riscv: Remove additional priv version check for mcountinhibit
hw/riscv: microchip_pfsoc: fix kernel panics due to missing peripherals
hw/riscv: opentitan: bump opentitan version
target/riscv: Fix priority of csr related check in riscv_csrrw_check
hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()
target/riscv: Add Zihintpause support
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: Use official extension names for AIA CSRs

The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs)

target/riscv: Use official extension names for AIA CSRs

The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).

Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)

Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220303' into staging

Fifth RISC-V PR for QEMU 7.0

* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* I

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220303' into staging

Fifth RISC-V PR for QEMU 7.0

* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* Increase maximum number of CPUs in virt machine
* Fixup OpenTitan SPI address
* Add support for zfinx, zdinx and zhinx{min} extensions

# gpg: Signature made Thu 03 Mar 2022 05:26:55 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20220303:
target/riscv: expose zfinx, zdinx, zhinx{min} properties
target/riscv: add support for zhinx/zhinxmin
target/riscv: add support for zdinx
target/riscv: add support for zfinx
target/riscv: hardwire mstatus.FS to zero when enable zfinx
target/riscv: add cfg properties for zfinx, zdinx and zhinx{min}
hw: riscv: opentitan: fixup SPI addresses
hw/riscv: virt: Increase maximum number of allowed CPUs
docs/system: riscv: Document AIA options for virt machine
hw/riscv: virt: Add optional AIA IMSIC support to virt machine
hw/intc: Add RISC-V AIA IMSIC device emulation
hw/riscv: virt: Add optional AIA APLIC support to virt machine
target/riscv: fix inverted checks for ext_zb[abcs]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc: Add RISC-V AIA IMSIC device emulation

The RISC-V AIA (Advanced Interrupt Architecture) defines a new
interrupt controller for MSIs (message signal interrupts) called
IMSIC (Incoming Message

hw/intc: Add RISC-V AIA IMSIC device emulation

The RISC-V AIA (Advanced Interrupt Architecture) defines a new
interrupt controller for MSIs (message signal interrupts) called
IMSIC (Incoming Message Signal Interrupt Controller). The IMSIC
is per-HART device and also suppport virtualizaiton of MSIs using
dedicated VS-level guest interrupt files.

This patch adds device emulation for RISC-V AIA IMSIC which
supports M-level, S-level, and VS-level MSIs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-3-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...