hw/intc/arm_gicv3_cpuif: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significan

hw/intc/arm_gicv3_cpuif: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3db74afec3ca87f81fbdf5918ed1e21d837fbfab)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 12dc8f6eca1ead876142fd3d6731cf3da1295f2a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit e0c0ea6eca4f210a52b9742817586cc97b1ee434)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/omap1: Remove unused omap_uwire_attach() method
* stm32f405: Add R

Merge tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/arm/omap1: Remove unused omap_uwire_attach() method
* stm32f405: Add RCC device to stm32f405 SoC
* arm/gicv3: add missing casts
* hw/misc: Create STM32L4x5 SYSCFG clock
* hw/arm: Add SPI to Allwinner A10
* hw/intc/omap_intc: Remove now-unnecessary abstract base class
* hw/char/pl011: Use correct masks for IBRD and FBRD
* docs/devel: Convert txt files to rST
* Remove MAX111X, MAX7310, DSCM-1XXXX, pcmcia devices (used only
by now-removed omap/pxa2xx boards)
* vl.c: Remove pxa2xx-specific -portrait and -rotate options
* dma: Fix function names in documentation
* hw/arm/xilinx_zynq: Add various missing unimplemented devices

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcOeWEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jCMD/482mpT1s+mrEJFWSJJXU4G
# 8kr4Zj6+NafbayJ0vHTkpSbkEbPxuvDiUqmlnbI+3o11i+Z3IyiaGZbba7dyNnKl
# 02MdQavL0dB+eMrcFNofRRvwvsposuj2ixgwTQe6L32HSFdHerVVwuhHM/wfwyCh
# DKt7gPRovD/7CtwDOSpyW7cK64WK1IUlE8VEsbFdQbCPkopm55LQ2sLT4TshadpG
# A6xcxyLN0x/lHgCmvijB1T09LSc1nQpUEQNIokC4f1Rmy6HNgGDYY1G7GAJf99mT
# nWhATuuhZThiYfRbN5KQoS9tGEUduxtkGhHiOgpdXpgc3cS7RusCHoqAnibpsVh3
# TgAkaRAX1d/jQ2KYR2h2jI3nh66ObhrFRT3dkzRZrIvmK9zeWUKmS9lzZ94aVfPH
# +MtBPwsO5OhzEABs8WpMY9V1nYaYDsFATMc1akUSaSLn1Er9Uz66NIk+J4Lob4P0
# 78IPvTmwvAIITiqQvkISsc37n5a2/toeaffU2hPKtQLlhyilWynEZA5YItrXSTuk
# gYIBxyZSbzGj/ofZ9T9C0GDLbhJp9ksNIpIqRUiHOH3z9b85r7HVZORp+COw/ZXR
# UGak6rpJ+XVOxVL/cPRTvZB0RbUHIZh7WLNH2G7Tfv4E4llqL81iuImHXVh/2CXO
# 9GWr9qbDLDYQ+BI7ipLAYg==
# =n2CA
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 15:17:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
hw/arm/xilinx_zynq: Add various missing unimplemented devices
dma: Fix function names in documentation
vl.c: Remove pxa2xx-specific -portrait and -rotate options
hw/block: Remove ecc
hw: Remove PCMCIA subsystem
hw/ide: Remove DSCM-1XXXX microdrive device model
hw/gpio: Remove MAX7310 device
hw/adc: Remove MAX111X device
docs/devel/lockcnt: Include kernel-doc API documentation
include: Move QemuLockCnt APIs to their own header
docs/devel/rcu: Convert to rST format
docs/devel/multiple-iothreads: Convert to rST format
docs/devel/lockcnt: Convert to rST format
docs/devel/blkverify: Convert to rST format
docs/devel/blkdebug: Convert to rST format
hw/char/pl011: Use correct masks for IBRD and FBRD
hw/intc/omap_intc: Remove now-unnecessary abstract base class
hw/arm: Add SPI to Allwinner A10
hw/ssi: Allwinner A10 SPI emulation
tests/qtest: Check STM32L4x5 clock connections
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3_cpuif: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significan

hw/intc/arm_gicv3_cpuif: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent ov

Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/intc/arm_gicv3: Report the VINMI interrupt

In vCPU Interface, if the vIRQ has the non-maskable property, report
vINMI to the corresponding vPE.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>

hw/intc/arm_gicv3: Report the VINMI interrupt

In vCPU Interface, if the vIRQ has the non-maskable property, report
vINMI to the corresponding vPE.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()

In CPU Interface, if the IRQ has the non-maskable property, report NMI to
the corresponding PE.

Signed-off-by: Jinjie Ruan <ruanj

hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()

In CPU Interface, if the IRQ has the non-maskable property, report NMI to
the corresponding PE.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()

Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for
ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit.

If FEAT_GICv3_NMI

hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()

Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for
ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit.

If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI
bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit
should be set or clear according to the Non-maskable property. And the RPR
priority should also update the NMI bit according to the APR priority NMI bit.

By the way, add gicv3_icv_nmiar1_read trace event.

If the hpp irq is a NMI, the icv iar read should return 1022 and trap for
NMI again

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use cs->nmi_support instead of cs->gic->nmi_support]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: Add NMI handling CPU interface registers

Add the NMIAR CPU interface registers which deal with acknowledging NMI.

When introduce NMI interrupt, there are some updates to the sema

hw/intc/arm_gicv3: Add NMI handling CPU interface registers

Add the NMIAR CPU interface registers which deal with acknowledging NMI.

When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.

And the APR and RPR has NMI bits which should be handled correctly.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240402' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* take HSTR traps of cp15 accesses to EL2, not EL1
* docs: sbsa: update specs

Merge tag 'pull-target-arm-20240402' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* take HSTR traps of cp15 accesses to EL2, not EL1
* docs: sbsa: update specs, add dt note
* hw/intc/arm_gicv3: ICC_HPPIR* return SPURIOUS if int group is disabled
* tests/qtest: Fix STM32L4x5 GPIO test on 32-bit
* raspi4b: Reduce RAM to 1Gb on 32-bit hosts

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYL3J8ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lL9D/9ayKF76MKs+oK8+uHTOLPb
# Mk71K1apgFnkzC7v9xuI76M6SzZpcKslUbieucDhkDLdVuZvlV3eUcwQGbNWu9fx
# PCkx7RmD54o+nlGxacZx4wGDfgu9j3maCVik048WxNoHb03NPahfHIb/GFRyHgt/
# TTjeqfAX7GDbHzMiGuaEJi5dLuAP0/imLt7pooJv4JRDX3CMY+tzlclU4ySMBr+S
# 0fs5oi6kZMayM8iolpSrPDQy/N3jZJpd5pNPPIcsnL5DEJHKodHbD11+Zetb1tQ7
# Tyw+x+hUb8Yx2WADVBaihYnbvakUVLt7ZzdgDENV534O/1Vmabzt14CBGTwq4faQ
# 8Hbc4e/ulhsOUlaxCDKTCuCKDW7sub7UelSz7mX6dAwcjvEi/L99dkP1wSpl0W04
# 3uTQyjDrfCOVNJ/FMYLRp5VkjwUVacbs3u3Tpe2bgRMI+hxnKZjtIMIY09q3l7em
# JrPOsiiJlVzngcQko1K0cor3p5W43HIhLUlh0RqJL/CsVhXFfHShAJowK31vGnNp
# ITklT5CWKMmogHTJycQieemhwwKaALgCUBC9TrcD1dTJe/GksYXVg6Fit7IJttBI
# zsPMM21Namtr1tKsV71xgtpDrkiWZkeFRpo/GrEf50bX1Mx7Dc8D/ons2RS0G2vo
# S13Dyt6GBtzS9M8rKX2fsQ==
# =rYVb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Apr 2024 11:23:27 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240402' of https://git.linaro.org/people/pmaydell/qemu-arm:
raspi4b: Reduce RAM to 1Gb on 32-bit hosts
tests/qtest: Fix STM32L4x5 GPIO test on 32-bit
hw/intc/arm_gicv3: ICC_HPPIR* return SPURIOUS if int group is disabled
docs: sbsa: update specs, add dt note
target/arm: take HSTR traps of cp15 accesses to EL2, not EL1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3: ICC_HPPIR* return SPURIOUS if int group is disabled

If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTI

hw/intc/arm_gicv3: ICC_HPPIR* return SPURIOUS if int group is disabled

If the group of the highest priority pending interrupt is disabled
via ICC_IGRPEN*, the ICC_HPPIR* registers should return
INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture
specification pseudocode functions ICC_HPPIR1_EL1[] and
HighestPriorityPendingInterrupt().)

Make HPPIR reads honour the group disable, the way we already do
when determining whether to preempt in icc_hppi_can_preempt().

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org

show more ...

hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to tre

hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to treat
these a little differently to standard interrupt IDs, because LPIs
have no Active state, and so the guest will only EOI them, it will
not also deactivate them. So icv_eoir_write() must do two things:

* if the LPI ID is not in any list register, we drop the
priority but do not increment the EOI count
* if the LPI ID is in a list register, we immediately deactivate
it, regardless of the split-drop-and-deactivate control

This can be seen in the VirtualWriteEOIR0() and VirtualWriteEOIR1()
pseudocode in the GICv3 architecture specification.

Without this fix, potentially a hypervisor guest might stall because
LPIs get stuck in a bogus Active+Pending state.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
(cherry picked from commit 82a65e3188abebb509510b391726711606aca642)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add

Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add minimal support for the B-L475E-IOT01A board
* Allow SoC models to configure M-profile CPUs with correct number
of NVIC priority bits
* Add missing QOM parent for v7-M SoCs
* Set CTR_EL0.{IDC,DIC} for the 'max' CPU
* hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWfypMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sleD/4tQOMteba5BNMDns6R96E4
# kj5q0Iy9XyzQ486Q4cIZXI5N3BddCp2ks8WeS2W3w4IT/lms0U6UwXV4E98I4I/b
# KSfOoUd/cp8IvdvzfpWbmQcPMoauHZdCUN33pYYXOjfi1RkpzgNU5Qgh09Nl/xYU
# V3oaEvWhLtepT/fwJLYxoqVHDaEmyW+6zriF0+eGjZvkhgPyhllla9eti7AyHTfH
# T3A4Fyx/wudRE3NP6xsLfxldriJTxQeba+TqLSh3IXn/PMtK13/ARsY/hl72Q4ML
# Fgad8Zho4eXbuOQ9oiqb7gp4K3IKd9/8FbCzECoIAq7AnLAD4KwpLQR8GULRvYW3
# 0eQq2txTXQWNcmWpIyDRRME+qeNVwWSk+QJDs5WuhVqlVQ4hpqtgFf1EX+7ORdS1
# WG0fb8etvr8oCSkzCmP/o6xYGJ0EyTVMU5DmWviy3bxMrUMcmobjvCQr/n2gC713
# 1NDmEaYPbl+pX8EMu8byst7/No2PXRgIO0UVVb4KZybfhNy+BBs+LiMVlSRS5YH4
# 8NWtoYZlG9RcPnY+8Xrxz9VTi2cNAAcdbf5uK3snJxkFV2SmV3oBoMxWen3mee0f
# 2PNVEbt9zvPV8hViBVLsqRhVXd9wMq6motIRlkKge1u1TvwIxO21ibykI3tvYOGv
# BffIjhUdnYtX90JAtXtFDw==
# =yQwf
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:01:39 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm: (41 commits)
target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Enhance CPU_LOG_INT to show SPSR on AArch64 exception-entry
target/arm: Report HCR_EL2.{NV,NV1,NV2} in cpu dumps
hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers
target/arm: Mark up VNCR offsets (offsets >= 0x200, except GIC)
target/arm: Mark up VNCR offsets (offsets 0x168..0x1f8)
target/arm: Mark up VNCR offsets (offsets 0x100..0x160)
target/arm: Mark up VNCR offsets (offsets 0x0..0xff)
target/arm: Report VNCR_EL2 based faults correctly
target/arm: Implement FEAT_NV2 redirection of sysregs to RAM
target/arm: Handle FEAT_NV2 redirection of SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2
target/arm: Handle FEAT_NV2 changes to when SPSR_EL1.M reports EL2
target/arm: Implement VNCR_EL2 register
target/arm: Handle HCR_EL2 accesses for FEAT_NV2 bits
target/arm: Add FEAT_NV to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Handle FEAT_NV page table attribute changes
target/arm: Treat LDTR* and STTR* as LDR/STR when NV, NV1 is 1, 1
target/arm: Don't honour PSTATE.PAN when HCR_EL2.{NV, NV1} == {1, 1}
target/arm: Always use arm_pan_enabled() when checking if PAN is enabled
target/arm: Trap registers when HCR_EL2.{NV, NV1} == {1, 1}
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers

Mark up the cpreginfo structs for the GIC CPU registers to indicate
the offsets from VNCR_EL2, as defined in table D8-66 in rule R

hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers

Mark up the cpreginfo structs for the GIC CPU registers to indicate
the offsets from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ
in the Arm ARM.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>

show more ...

hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to tre

hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to treat
these a little differently to standard interrupt IDs, because LPIs
have no Active state, and so the guest will only EOI them, it will
not also deactivate them. So icv_eoir_write() must do two things:

* if the LPI ID is not in any list register, we drop the
priority but do not increment the EOI count
* if the LPI ID is in a list register, we immediately deactivate
it, regardless of the split-drop-and-deactivate control

This can be seen in the VirtualWriteEOIR0() and VirtualWriteEOIR1()
pseudocode in the GICv3 architecture specification.

Without this fix, potentially a hypervisor guest might stall because
LPIs get stuck in a bogus Active+Pending state.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>

show more ...

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmWcJMUACgkQnKSrs4Gr
# c

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmWcJMUACgkQnKSrs4Gr
# c8hh/Qf/Wt177UlhBR49OWmmegs8c8yS1mhyawo7YIJM4pqoXCYLaACpcKECXcGU
# rlgyR4ow68EXnnU8+/s2cp2UqHxrla+E2eNqBoTDmkNt3Cko5sJn5G5PM5EYK+mO
# JjFRzn7awRyxD6mGOuaMVoj6OuHbAA/U4JF7FhW0YuRl8v0/mvAxRSfQ4U6Crq/y
# 19Aa1CXHD1GH2CUJsMCY8zT47Dr4DJcvZx5IpcDFaHaYDCkktFwNzdo5IDnCx2M2
# xnP37Qp/Q93cu12lWkVOu8HCT6yhoszahyOqlBxDmo7QeGkskrxGbMyE+vHM3fFI
# aGSxiw193U7/QWu+Cq2/727C3YIq1g==
# =pKUb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 08 Jan 2024 16:37:25 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
Rename "QEMU global mutex" to "BQL" in comments and docs
Replace "iothread lock" with "BQL" in comments
qemu/main-loop: rename qemu_cond_wait_iothread() to qemu_cond_wait_bql()
qemu/main-loop: rename QEMU_IOTHREAD_LOCK_GUARD to BQL_LOCK_GUARD
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()
iothread: Remove unused Error** argument in aio_context_set_aio_params

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()

The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonl

system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()

The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().

The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.

The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)

There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits s

Merge tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
* Fix SME FMOPA (16-bit), BFMOPA
* hw/core/machine: Constify MachineClass::valid_cpu_types[]
* stm32f* machines: Report error when user asks for wrong CPU type
* hw/arm/fsl-imx: Do not ignore Error argument

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVchLYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kHMD/47tKxzrsXc6+V9esRQGi2H
# 1hAgLBwglEdxLXokF+Di41sh/fvK7wYVXO/hiWlq+9h3kG3D/u1N5r1TdMPMUb9j
# 4Sg3rOejn7nzkxVZ6MZ/K/1j84C9bfrt4sboVHZVRvWuvbiyuTuivEr4IqLYO4x3
# AIwhFMQ5gbNrmClZh/DBxj0keO13cp63Fg2JSSICdi+1Dw9rRXTyhJloMu1omeqc
# k/BXzjSeNXpLSMyGWBR3uaPcJBaGC1xnz3Z1V7fUY1EYD2Cu1oo5lEZ9aNO5t30d
# XW/qVGLa3b1Cb7WuEO247RnU3N2oZotozjFtdj/8IQoYWspM9RHyipEimUlegVdO
# 3fpu8QGsN1ljNiwjdk0i6OwS7SGxcPtteFOaqEf/Yogj4EOKTn/Rx5TT4vJ5DhmI
# 2w/9J15JWDIE1paNwecuFWbxCOOzSsOtSxzuyLSZDU3GlNfJ4zoF6YboROLYfejy
# NXZABFhGd/0ykX7r0VY1GGYXUQ+akv6q+VDmVZCP9gMiRUiqmFPwMLMLlcuHb8G5
# 8UztN5SvOG2EYXj28Zx0BnGCNiGdI15rWMb0veqAtbnn3yEdltW3O475BAhZ0PB7
# OVpLWnXwmWURm/BGlwb1PH5s3kgWgzOebcBgcnCftwFQ8EedQAQDA5FmT+nK5SfV
# VoOf89PngTubU6B3BOfeBw==
# =thIa
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 05:21:42 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm/fsl-imx: Do not ignore Error argument
hw/arm/stm32f100: Report error when incorrect CPU is used
hw/arm/stm32f205: Report error when incorrect CPU is used
hw/arm/stm32f405: Report error when incorrect CPU is used
hw/core/machine: Constify MachineClass::valid_cpu_types[]
target/arm: Fix SME FMOPA (16-bit), BFMOPA
hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
target/arm: enable FEAT_RNG on Neoverse-N2

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ

The ICC_PMR_ELx and ICV_PMR_ELx bit masks returned from
ic{c,v}_fullprio_mask should technically also remove any
bit above 7 as these are marke

hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ

The ICC_PMR_ELx and ICV_PMR_ELx bit masks returned from
ic{c,v}_fullprio_mask should technically also remove any
bit above 7 as these are marked reserved (read 0) and should
therefore should not be written as anything other than 0.

This was noted during a run of a proprietary test system and
discused on the mailing list [1] and initially thought not to
be an issue due to RES0 being technically allowed to be
written to and read back as long as the implementation does
not use the RES0 bits. It is very possible that the values
are used in comparison without masking, as pointed out by
Peter in [2], if (cs->hppi.prio >= cs->icc_pmr_el1) may well
do the wrong thing.

Masking these values in ic{c,v}_fullprio_mask() should fix
this and prevent any future problems with playing with the
values.

[1]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00607.html
[2]: https://lists.nongnu.org/archive/html/qemu-arm/2023-11/msg00737.html

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Message-id: 20231116172818.792364-1-ben.dooks@codethink.co.uk
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20230203' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix physical address resolution for Stage2
* pl011: refactoring, implement

Merge tag 'pull-target-arm-20230203' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Fix physical address resolution for Stage2
* pl011: refactoring, implement reset method
* Support GICv3 with hvf acceleration
* sbsa-ref: remove cortex-a76 from list of supported cpus
* Correct syndrome for ATS12NSO* traps at Secure EL1
* Fix priority of HSTR_EL2 traps vs UNDEFs
* Implement FEAT_FGT for '-cpu max'

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmPdGisZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iTND/4qnI00PcqPhdZAD083admx
# Tn+7OaTd8aaWHDMvbnV3fNsvAEt//j8DdzeBGDLbgfhBuOCPB8z7oDSr7oqczmys
# Yjnh25o6IDUYtMnKR+dBwFKGvAqWwM4UdEllkHJvvM+QpnlH7iu9lCkgYr6PvBYA
# h4ajfZ5J7C2OmFJZqsKa2Ot3mveFxos1QzgWSmsWNGTJiZTOCiD7AvuCnEsBBaVP
# pESY+5eGjVmjv6ocHxcHG4LA456bHAf6JiCgKqgwowRBlJenpsnNgKleIN4gQA/J
# wtfLALNe6FkTV9tzK/MgtO1qOhxkUHrnTrYTtTLmk4H1VryFdDvomYB34zBIgfMY
# l1LmMba6UCoxtck13D5jv1xkE56o7Z3kqrhyOvP+aHFdi+dvYQ/z+b8pqUeYeSiu
# EbVWa/270JwVdbBT08vfW33Ci9n7fxZtRCrvj2viMgOiQOKwXYEb5AVxM9TRZSKC
# Y+1m5frW2HQ+KNvjEyHdMJ8q4nFhaS5Bq2A2RMaQCV2QBuBJvFkGL3ul6M0lw/eq
# cAZDKN6H/8N2l2DPcPHUy6RMiqUPSnemvFI814ElKeHGa1V1c7Iw9C4lWAV5Ue5E
# gotHC1ros89xV0Eg0gaB9UgX8TgbQUfc3g1g6YUvTCfQdvxL0H1rY+wUWU1h1V2r
# VdhxI95gUkgmoVnk8KnwIw==
# =hk0j
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Feb 2023 14:28:59 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230203' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
target/arm: Enable FEAT_FGT on '-cpu max'
target/arm: Implement MDCR_EL2.TDCC and MDCR_EL3.TDCC traps
target/arm: Implement the HFGITR_EL2.SVC_EL0 and SVC_EL1 traps
target/arm: Implement the HFGITR_EL2.ERET trap
target/arm: Mark up sysregs for HFGITR bits 48..63
target/arm: Mark up sysregs for HFGITR bits 18..47
target/arm: Mark up sysregs for HFGITR bits 12..17
target/arm: Mark up sysregs for HFGITR bits 0..11
target/arm: Mark up sysregs for HDFGRTR bits 12..63
target/arm: Mark up sysregs for HDFGRTR bits 0..11
target/arm: Mark up sysregs for HFGRTR bits 36..63
target/arm: Mark up sysregs for HFGRTR bits 24..35
target/arm: Mark up sysregs for HFGRTR bits 12..23
target/arm: Mark up sysregs for HFGRTR bits 0..11
target/arm: Implement FGT trapping infrastructure
target/arm: Define the FEAT_FGT registers
target/arm: Disable HSTR_EL2 traps if EL2 is not enabled
target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1
target/arm: All UNDEF-at-EL0 traps take priority over HSTR_EL2 traps
target/arm: Move do_coproc_insn() syndrome calculation earlier
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Mark up sysregs for HFGRTR bits 36..63

Mark up the sysreg definitions for the registers trapped
by HFGRTR/HFGWTR bits 36..63.

Of these, some correspond to RAS registers which we impleme

target/arm: Mark up sysregs for HFGRTR bits 36..63

Mark up the sysreg definitions for the registers trapped
by HFGRTR/HFGWTR bits 36..63.

Of these, some correspond to RAS registers which we implement as
always-UNDEF: these don't need any extra handling for FGT because the
UNDEF-to-EL1 always takes priority over any theoretical
FGT-trap-to-EL2.

Bit 50 (NACCDATA_EL1) is for the ACCDATA_EL1 register which is part
of the FEAT_LS64_ACCDATA feature which we don't yet implement.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-14-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-14-peter.maydell@linaro.org

show more ...

hvf: arm: Add support for GICv3

We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.

This patch add

hvf: arm: Add support for GICv3

We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.

This patch adds support for HVF to call into the TCG callbacks for GICv3
system register handlers. This is safe because the GICv3 TCG code is generic
as long as we limit ourselves to EL0 and EL1 - which are the only modes
supported by HVF.

To make sure nobody trips over that, we also annotate callbacks that don't
work in HVF mode, such as EL state change hooks.

With GICv3 support in place, we can run with more than 8 vCPUs.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20230128224459.70676-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...