Merge tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.0

* Make vector whole-register move (vmv) depend on vtype register
* Fix th.dcache.cval1

Merge tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.0

* Make vector whole-register move (vmv) depend on vtype register
* Fix th.dcache.cval1 priviledge check
* Don't allow write mstatus_vs without RVV
* Use hwaddr instead of target_ulong for RV32
* Fix machine IDs QOM getters\
* Fix KVM reg id sizes
* ACPI: Enable AIA, PLIC and update RHCT
* Fix the interrupts-extended property format of PLIC
* Add support for Zacas extension
* Add amocas.[w,d,q] instructions
* Document acpi parameter of virt machine
* RVA22 profiles support
* Remove group setting of KVM AIA if the machine only has 1 socket
* Add RVV CSRs to KVM
* sifive_u: Update S-mode U-Boot image build instructions
* Upgrade OpenSBI from v1.3.1 to v1.4
* pmp: Ignore writes when RW=01 and MML=0
* Assert that the CSR numbers will be correct
* Don't adjust vscause for exceptions
* Ensure mideleg is set correctly on reset

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmWeW8kACgkQr3yVEwxT
# gBMB3BAAtpb7dC/NqDOjo/LjGf81wYUnF0KcfJUIbuHEM9S03mKJEvngV/sUhg+A
# fzsoJazijQZk2+Y02WLT/o+ppRDegb4P6n54Nn13xr024Dn2jf45+EKDLI+vtU5y
# lhwp/LH3SEo2MM/Qr0njl8+jJ7W9adhZeK6x+NFaLaQJ291xupbcwEnScdv2bPAo
# gvbM6yrfUoZ25MsQKIDGssozdGRwOD/keAT0q8C0gKDamqXBDrI80BOVhRms+uLm
# R33DXsAegPKluJTa9gfaWFI0eK34WHXRvSIjE36nZlGNNgqLAVdM2/QozMVz4cKA
# Ymz1nzqB9HeSn1pM4KCK/Y3LH89qLGWtyHYgldiDXA/wSyKajwkbXSWFOT9gPDqV
# i+5BRDvU0zIeMIt+ROqNKgx1Hry6U2aycMNsdHTmygJbGEpiTaXuES5tt+LKsyHe
# w/7a6wPd/kh9LQhXYQ4qbn7L534tWvn8zWyvKLZLxmYPcOn6SdjFbKWmk5ARky2W
# sx9ojn9ANlYaLfzQ3TMRcIhWD6n8Si3KFNiQ3353E8xkRkyfu0WHyXAy8/kIc5UT
# nScO2YD68XkdkcLF6uLUKuGiVZXFWXRY1Ttz9tvEmBckVsg6TIkoMONHeUWNP7ly
# A0bJwN5qEOk6XIYKHWwX5UzvkcfUpOb5VmuLuv3gRoNX0A7/+fc=
# =5K9J
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 Jan 2024 08:56:41 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu: (65 commits)
target/riscv: Ensure mideleg is set correctly on reset
target/riscv: Don't adjust vscause for exceptions
target/riscv: Assert that the CSR numbers will be correct
target/riscv: pmp: Ignore writes when RW=01 and MML=0
roms/opensbi: Upgrade from v1.3.1 to v1.4
docs/system/riscv: sifive_u: Update S-mode U-Boot image build instructions
target/riscv/kvm: add RVV and Vector CSR regs
target/riscv/kvm: do PR_RISCV_V_SET_CONTROL during realize()
linux-headers: riscv: add ptrace.h
linux-headers: Update to Linux v6.7-rc5
target/riscv/kvm.c: remove group setting of KVM AIA if the machine only has 1 socket
target/riscv: add rva22s64 cpu
target/riscv: add RVA22S64 profile
target/riscv: add 'parent' in profile description
target/riscv: add satp_mode profile support
target/riscv/cpu.c: add riscv_cpu_is_32bit()
target/riscv/cpu.c: finalize satp_mode earlier
target/riscv: add priv ver restriction to profiles
target/riscv: implement svade
target/riscv: add 'rva22u64' CPU
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/i386/acpi-microvm.c: Use common function to add virtio in DSDT

With common function to add virtio in DSDT created now, update microvm
code also to use it instead of duplicate code.

Suggested-by:

hw/i386/acpi-microvm.c: Use common function to add virtio in DSDT

With common function to add virtio in DSDT created now, update microvm
code also to use it instead of duplicate code.

Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge tag 'pull-shadow-2023-10-06' of https://repo.or.cz/qemu/armbru into staging

-Wshadow=local patches patches for 2023-10-06

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fO

Merge tag 'pull-shadow-2023-10-06' of https://repo.or.cz/qemu/armbru into staging

-Wshadow=local patches patches for 2023-10-06

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmUf72kSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTDU4P/3R9y5D5d3cj4uI+eaM22+Da0MFUL2gq
# bFL192gYj1cmnNqxp+d6ur7FbSlP2AuERHb50Off7jJzdNee+tEeRUPekY+HhKfT
# 5Aj6r9M2jV3/sNXqzns7x9Yj2B8xaJlclKPUAaVAxIuhVradWqJiPSkc26sKPB7l
# eyqjVvr9+GTQYPSh+YVbYDAUYU9rEL6FiWLPkKm7Kt3/xqp5pTVbUSQbgKQczGWL
# /JFILJc5pjISzYPyVxDPSNJY9q4k37JtcJmsO94G9O0GEe5vE72I85OQwI3Fl824
# 1fc2bfkGB6cg1QcJAluOgjuMUe8Wqaw6tnnHgipr1mwFOizrQ9wQW2xRI9RRJfYa
# bZmVWIw22P691pgTnFIHWKV6/A2xyq+j00VojQhLyMX9CPPCbIm9hKCZXz6lPGDt
# xPX2//q866anFCCyQmimMSeJ4E1GgBTnWgLZMYJ+S3DL/VkW2FGZjiQMyOsRplDm
# O6+m6GOiF3wW51uqphaRHwF+PxxNE4Dv+61pYEeKdQELSCAmYrN574BDPehVTcfa
# luvSLZEl+qvUbkbw4ysrtiCX2YzVI4COxSscjxCXbku3wRbGSkHBeDadb3p17kuQ
# 7FZILaFJo1wXHAine4/f6aNeV/GZihMqJ1cok6SDJh2E1PycF9NTdiKMb/6Zvvf+
# KOVyBhY4NXlj
# =uE1Y
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 06 Oct 2023 07:28:41 EDT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* tag 'pull-shadow-2023-10-06' of https://repo.or.cz/qemu/armbru: (32 commits)
linux-user/syscall.c: clean up local variable shadowing in xattr syscalls
linux-user/syscall.c: clean up local variable shadowing in TARGET_NR_getcpu
linux-user/syscall.c: clean up local variable shadowing in do_ioctl_dm()
linux-user/mmap.c: clean up local variable shadowing
linux-user/flatload: clean up local variable shadowing
hw/usb: Silence compiler warnings in USB code when compiling with -Wshadow
target/ppc: Clean up local variable shadowing in kvm_arch_*_registers()
trace/control: Clean up global variable shadowing
sysemu/tpm: Clean up global variable shadowing
softmmu/vl: Clean up global variable shadowing
semihosting/arm-compat: Clean up local variable shadowing
util/guest-random: Clean up global variable shadowing
util/cutils: Clean up global variable shadowing in get_relocated_path()
ui/cocoa: Clean up global variable shadowing
semihosting: Clean up global variable shadowing
qom/object_interfaces: Clean up global variable shadowing
qemu-io: Clean up global variable shadowing
qemu-img: Clean up global variable shadowing
plugins/loader: Clean up global variable shadowing
os-posix: Clean up global variable shadowing
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/i386: changes towards enabling -Wshadow=local for x86 machines

Code changes that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local va

hw/i386: changes towards enabling -Wshadow=local for x86 machines

Code changes that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch.

See also

Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org

CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com

Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20231003102803.6163-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pci: features, cleanups

vdpa:
shadow vq vlan support
net migration with cvq
cxl:
su

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pci: features, cleanups

vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf

Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...

Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd5d ("hw/core: remove needless
includes") because it removed an adjacent #include.

show more ...

hw/i386/acpi-build: Use pc_madt_cpu_entry() directly

This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.

Signed-off-by: Bernh

hw/i386/acpi-build: Use pc_madt_cpu_entry() directly

This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

lots of fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@re

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

lots of fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmPYJdcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp08cIAMYq0y++RtepDpLnPjybR0v1G4cPgZS4DXFz
# 8uc/2nkAHe1Q2lJNmk9p3YjLLloSO8yC1bmuuhUpmry9BJokYzY1r7rfXc8jd/Za
# z2FjC9LuYX+sk26NTGUxPq9mhT0p14HXyoxpnQlCweuVL0DJg1Tip6HI4oOG2LJj
# Au6Rl9keMQNqf9qVtsR1djO+8nO4ywbx6D9d2CYSKkQ3pK3uLvNds9vqU16x8wq7
# mNPqV8BIoDgW4zEOL478h6rJcL7pDQo6kAT1wfg7q1JcMMHJfW36VcBeFfskfJFg
# Pej3TEP2rg1LsGfh5XVw5Rp6FZ4K2TEyTK9cPZ9F7CzKdUrgBHU=
# =S0zd
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 Jan 2023 20:17:27 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (56 commits)
docs/pcie.txt: Replace ioh3420 with pcie-root-port
Revert "vhost-user: Introduce nested event loop in vhost_user_read()"
Revert "vhost-user: Monitor slave channel in vhost_user_read()"
tests/qtest/bios-tables-test: Make the test less verbose by default
hw: Use TYPE_PCI_BUS definition where appropriate
vhost-user: Skip unnecessary duplicated VHOST_USER_ADD/REM_MEM_REG requests
tests: acpi: update expected blobs
pcihp: generate populated non-hotpluggble slot descriptions on non-hotplug path
tests: acpi: whitelist DSDT before moving non-hotpluggble slots description from hotplug path
tests: acpi: update expected blobs
pcihp: acpi: ignore coldplugged bridges when composing hotpluggable slots
tests: acpi: whitelist DSDT blobs before removing dynamic _DSM on coldplugged bridges
tests: acpi: update expected blobs
pcihp: acpi: decouple hotplug and generic slots description
tests: acpi: whitelist DSDT before decoupling PCI hotplug code from basic slots description
pcihp: isolate rule whether slot should be described in DSDT
pci: make sure pci_bus_is_express() won't error out with "discards ‘const’ qualifier"
pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml
pci: acpi: wire up AcpiDevAmlIf interface to generic bridge
x86: pcihp: acpi: prepare slot ignore rule to work with self describing bridges
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/isa/isa-bus: Turn isa_build_aml() into qbus_build_aml()

Frees isa-bus.c from implicit ACPI dependency.

While at it, resolve open coding of qbus_build_aml() in piix3 and ich9.

Signed-off-by: Ber

hw/isa/isa-bus: Turn isa_build_aml() into qbus_build_aml()

Frees isa-bus.c from implicit ACPI dependency.

While at it, resolve open coding of qbus_build_aml() in piix3 and ich9.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230121151941.24120-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,pci: features, cleanups, fixes

vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,pci: features, cleanups, fixes

vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards

Fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# docs/specs/index.rst

show more ...

hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present

The second bit of IAPC_BOOT_ARCH in FADT table indicates the presence of
keyboard controller implemented as 8042 or equiv

hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present

The second bit of IAPC_BOOT_ARCH in FADT table indicates the presence of
keyboard controller implemented as 8042 or equivalent micro controller. This
change enables this flag for microvms if such a device exists (for example,
when added explicitly from the QEMU commandline). Change
654701e292d98b308b0 ("hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table")
enabled this flag for i386 q35 based machines. The reason for doing the same
for micro-vms is to make sure we provide the correct tables to the guest OS
uniformly in all cases when an i8042 device is present. When this bit is not
enabled, guest OSes has to find other indirect methods to detect the device
which we would like to avoid.

Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc: features, cleanups, fixes

Part of ACPI ERST support
fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redh

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc: features, cleanups, fixes

Part of ACPI ERST support
fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 06 Feb 2022 09:36:24 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (24 commits)
util/oslib-posix: Fix missing unlock in the error path of os_mem_prealloc()
ACPI ERST: step 6 of bios-tables-test.c
ACPI ERST: bios-tables-test testcase
ACPI ERST: qtest for ERST
ACPI ERST: create ACPI ERST table for pc/x86 machines
ACPI ERST: build the ACPI ERST table
ACPI ERST: support for ACPI ERST feature
ACPI ERST: header file for ERST
ACPI ERST: PCI device_id for ERST
ACPI ERST: bios-tables-test.c steps 1 and 2
libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb
libvhost-user: handle removal of identical regions
libvhost-user: prevent over-running max RAM slots
libvhost-user: fix VHOST_USER_REM_MEM_REG not closing the fd
libvhost-user: Simplify VHOST_USER_REM_MEM_REG
libvhost-user: Add vu_add_mem_reg input validation
libvhost-user: Add vu_rem_mem_reg input validation
tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
tests: acpi: update expected blobs
acpi: fix OEM ID/OEM Table ID padding
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

ACPI ERST: create ACPI ERST table for pc/x86 machines

This change exposes ACPI ERST support for x86 guests.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisi

ACPI ERST: create ACPI ERST table for pc/x86 machines

This change exposes ACPI ERST support for x86 guests.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: features, fixes

A huge acpi refactoring.
Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsir

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: features, fixes

A huge acpi refactoring.
Fixes, cleanups all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 05 Oct 2021 02:31:11 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]

* remotes/mst/tags/for_upstream: (47 commits)
hw/i386/amd_iommu: Add description/category to TYPE_AMD_IOMMU_PCI
hw/i386/amd_iommu: Rename SysBus specific functions as amdvi_sysbus_X()
hw/i386/amd_iommu: Rename amdviPCI TypeInfo
nvdimm: release the correct device list
virtio-balloon: Fix page-poison subsection name
bios-tables-test: Update ACPI DSDT table golden blobs for q35
hw/i386/acpi: fix conflicting IO address range for acpi pci hotplug in q35
bios-tables-test: allow changes in DSDT ACPI tables for q35
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute
acpi: remove no longer used build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()

it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table

acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()

it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Do not include hw/boards.h if it's not really necessary

Stop including hw/boards.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-t

Do not include hw/boards.h if it's not really necessary

Stop including hw/boards.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: fixes, features

Fixes all over the place.
ACPI index support.

Signed-off-by: Michael S. Tsirkin <mst@redhat

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: fixes, features

Fixes all over the place.
ACPI index support.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 22 Mar 2021 22:58:45 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
acpi: Move setters/getters of oem fields to X86MachineState
acpi: Set proper maximum size for "etc/acpi/rsdp" blob
acpi: Move maximum size logic into acpi_add_rom_blob()
microvm: Don't open-code "etc/table-loader"
acpi: Set proper maximum size for "etc/table-loader" blob
tests: acpi: update expected blobs
pci: acpi: add _DSM method to PCI devices
acpi: add aml_to_decimalstring() and aml_call6() helpers
pci: acpi: ensure that acpi-index is unique
pci: introduce acpi-index property for PCI device
tests: acpi: temporary whitelist DSDT changes
virtio-pmem: fix virtio_pmem_resp assign problem
vhost-user: Monitor slave channel in vhost_user_read()
vhost-user: Introduce nested event loop in vhost_user_read()
vhost-user: Convert slave channel to QIOChannelSocket
vhost-user: Factor out duplicated slave_fd teardown code
vhost-user: Fix double-close on slave_read() error path
vhost-user: Drop misleading EAGAIN checks in slave_read()
virtio: Fix virtio_mmio_read()/virtio_mmio_write()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

acpi: Move setters/getters of oem fields to X86MachineState

The code that sets/gets oem fields is duplicated in both PC and MICROVM
variants. This commit moves it to X86MachineState so that all x86

acpi: Move setters/getters of oem fields to X86MachineState

The code that sets/gets oem fields is duplicated in both PC and MICROVM
variants. This commit moves it to X86MachineState so that all x86
variants can use it and duplication is removed.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210221001737.24499-2-posteuca@mutex.one>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

acpi: Move maximum size logic into acpi_add_rom_blob()

We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
d

acpi: Move maximum size logic into acpi_add_rom_blob()

We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
dependent on the table name, so we don't have to replicate for each and
every instance that creates such tables.

Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-4-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

microvm: Don't open-code "etc/table-loader"

Let's just reuse ACPI_BUILD_LOADER_FILE.

Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirk

microvm: Don't open-code "etc/table-loader"

Let's just reuse ACPI_BUILD_LOADER_FILE.

Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-3-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

acpi: Set proper maximum size for "etc/table-loader" blob

The resizeable memory region / RAMBlock that is created for the cmd blob
has a maximum size of whole host pages (e.g., 4k), because RAMBlock

acpi: Set proper maximum size for "etc/table-loader" blob

The resizeable memory region / RAMBlock that is created for the cmd blob
has a maximum size of whole host pages (e.g., 4k), because RAMBlocks
work on full host pages. In addition, in i386 ACPI code:
acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE);
makes sure to align to multiples of 4k, padding with 0.

For example, if our cmd_blob is created with a size of 2k, the maximum
size is 4k - we cannot grow beyond that. Growing might be required
due to guest action when rebuilding the tables, but also on incoming
migration.

This automatic generation of the maximum size used to be sufficient,
however, there are cases where we cross host pages now when growing at
runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when
trying to resize the resizeable memory region / RAMBlock:
$ build/qemu-system-x86_64 --enable-kvm \
-machine q35,nvdimm=on \
-smp 1 \
-cpu host \
-m size=2G,slots=8,maxmem=4G \
-object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \
-device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \
-nodefaults \
-device vmgenid \
-device intel-iommu

Results in:
Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850:
qemu-system-x86_64: Size too large: /rom@etc/table-loader:
0x2000 > 0x1000: Invalid argument

In this configuration, we consume exactly 4k (32 entries, 128 bytes each)
when creating the VM. However, once the guest boots up and maps the MCFG,
we also create the MCFG table and end up consuming 2 additional entries
(pointer + checksum) -- which is where we try resizing the memory region
/ RAMBlock, however, the maximum size does not allow for it.

Currently, we get the following maximum sizes for our different
mutable tables based on behavior of resizeable RAMBlock:

hw table max_size
------- ---------------------------------------------------------

virt "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
virt "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
virt "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)

i386 "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
i386 "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
i386 "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)

microvm "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
microvm "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
microvm "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)

Let's set the maximum table size for "etc/table-loader" to 64k, so we
can properly grow at runtime, which should be good enough for the future.

Migration is not concerned with the maximum size of a RAMBlock, only
with the used size - so existing setups are not affected. Of course, we
cannot migrate a VM that would have crash when started on older QEMU from
new QEMU to older QEMU without failing early on the destination when
synchronizing the RAM state:
qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument
qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram'
qemu-system-x86_64: load of migration failed: Invalid argument

We'll refactor the code next, to make sure we get rid of this implicit
behavior for "etc/acpi/rsdp" as well and to make the code easier to
grasp.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-2-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: fixes, features,code removal

Fixes all over the place.
Ability to control ACPI OEM ID's.
Ability to control

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: fixes, features,code removal

Fixes all over the place.
Ability to control ACPI OEM ID's.
Ability to control rom BAR size.
Removal of deprecated pc machine types.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 05 Feb 2021 13:54:32 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
tests/acpi: disallow updates for expected data files
tests/acpi: update expected data files
tests/acpi: add OEM ID and OEM TABLE ID test
acpi: use constants as strncpy limit
acpi: Permit OEM ID and OEM table ID fields to be changed
tests/acpi: allow updates for expected data files
vhost: Check for valid vdev in vhost_backend_handle_iotlb_msg
hw/virtio/virtio-balloon: Remove the "class" property
hw/i386: Remove the deprecated pc-1.x machine types
vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support
virtio-pmem: add trace events
virtio: Add corresponding memory_listener_unregister to unrealize
virtio-mmio: fix guest kernel crash with SHM regions
virtio: move 'use-disabled-flag' property to hw_compat_4_2
pci: add romsize property
pci: reject too large ROMs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

acpi: Permit OEM ID and OEM table ID fields to be changed

Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table n

acpi: Permit OEM ID and OEM table ID fields to be changed

Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table name.

Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID
and OEM table ID for the strings "BOCHS" and "BXPC" and if they are
found, the game crashes(this may be an intentional detection
mechanism to prevent playing the game in a virtualized environment).

This patch allows you to override these default values.

The feature can be used in this manner:
qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN

The oem-id string can be up to 6 bytes in size, and the
oem-table-id string can be up to 8 bytes in size. If the string are
smaller than their respective sizes they will be padded with space.
If either of these parameters is not set, the current default values
will be used for the one missing.

Note that the the OEM Table ID field will not be extended with the
name of the table, but will use either the default name or the user
provided one.

This does not affect the -acpitable option (for user-defined ACPI
tables), which has precedence over -machine option.

Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-3-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20201021-pull-request' into staging

microvm: fix PCIe IRQs in APIC table.
microvm: add usb support.

# gpg: Signature made Wed 21 Oct 2020 1

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20201021-pull-request' into staging

microvm: fix PCIe IRQs in APIC table.
microvm: add usb support.

# gpg: Signature made Wed 21 Oct 2020 15:48:00 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/microvm-20201021-pull-request:
tests/acpi: update expected data files
tests/acpi: add microvm rtc test
tests/acpi: add microvm usb test
tests/acpi: add empty tests/data/acpi/microvm/DSDT.{usb, rtc} files
tests/acpi: allow updates for expected data files
microvm: add usb support
usb/xhci: fixup xhci kconfig deps
usb/xhci: add xhci_sysbus_build_aml() helper
usb/xhci: add include/hw/usb/xhci.h header file
acpi: add aml builder stubs
tests/acpi: disallow changes for microvm/APIC.pcie
tests/acpi: update expected data files
apci: drop has_pci arg for acpi_build_madt
microvm: set pci_irq_mask
x86: make pci irqs runtime configurable
tests/acpi: add empty microvm/APIC.pcie
tests/acpi: allow changes for microvm/APIC.pcie

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

microvm: add usb support

Wire up "usb=on" machine option, when enabled add
a sysbus xhci controller with 8 ports.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-6-

microvm: add usb support

Wire up "usb=on" machine option, when enabled add
a sysbus xhci controller with 8 ports.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-6-kraxel@redhat.com

show more ...