hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 suppo

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".

The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.

Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It h

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.

It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.

Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.

Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.

The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>

show more ...

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.

Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.

An I2C controller registers owns 8KB address space.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.

To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.

Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.

Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.

The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are di

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.

Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer

Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.

To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.

Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.

Incrementing the version of aspeed_i2c_bus_vmstate to 6.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuo

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.

Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15

Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 suppo

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".

The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.

Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It h

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.

It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.

Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.

Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.

The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>

show more ...

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.

Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.

An I2C controller registers owns 8KB address space.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.

To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.

Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.

Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.

The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are di

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.

Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer

Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.

To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.

Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.

Incrementing the version of aspeed_i2c_bus_vmstate to 6.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuo

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.

Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15

Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

Merge tag 'pull-aspeed-20240916' of https://github.com/legoater/qemu into staging

aspeed queue:

* I2C support for AST2700
* Coverity fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlS

Merge tag 'pull-aspeed-20240916' of https://github.com/legoater/qemu into staging

aspeed queue:

* I2C support for AST2700
* Coverity fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmbofzEACgkQUaNDx8/7
# 7KHo4g//RtzY1oM+5xbX7LA4Nb45EJtAs9+UvbvDF7++NF9Nd4VThdoyBSvzyqd8
# 9Z35Mfoh1xce7+Qz/QtobbRkPLKtq7rfmj4lCkXZRGR/0nbDteqyLOqDM/E/GSBc
# mEaMG9sT2L1t9SrKOYIhgoPSpS0kpJ0YHfMLt5DcTjLQ1g8OB7ByzOPoPSBzTPAf
# QLL/v0GTxdqQPRhcZJKGclkjeVwBtFpo1rbDe/tHfFKC51g3cROGyQEswuPxRqDB
# Y3CQ0WC7awqSg7WAUwTfyb6LNSmYoiycGKv/gi06kc/mxjpf2qQ2khX4diiPoOj0
# Ak1b/dv2DWKE8LDYw7ew44UdPyIhGhgFeYeJ1olz5oLUcdcd4PuBWBvLUgpJKEfk
# HRXcJyhat3rwWGYzrdCJbBPN6CPncWjyifg1X6jK6Eu4wnfdpB9m64xFg8TpALaz
# SRZGg0ahldBwU6jjDO3x/RMWzKCtzwAjDuLfxSlqDGPx5OL+0dDDEa+xj45VzzBZ
# aT5Kcy9ga9DgRUw4wds3NHz9uCxwXoktDkW3vKMeMdftAf6er+Inhe8FHer/JSh4
# wuCxUDYIUSate5QoVucHAAM3DqOCQ1ascugufluXAR4StJ/u2b3SXU881C7v4crP
# NDncQEsWgya+Ykv9lXgulDxZrc8qsSmj4aoRNtJHaGsxmb4RwSY=
# =NyK5
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 Sep 2024 19:55:45 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* tag 'pull-aspeed-20240916' of https://github.com/legoater/qemu:
machine_aspeed.py: Update to test I2C for AST2700
aspeed: Add tmp105 in i2c bus 0 for AST2700
aspeed/soc: Support I2C for AST2700
aspeed/soc: Introduce a new API to get the device irq
hw/i2c/aspeed: Add support for 64 bit addresses
hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses
hw/i2c/aspeed: Add AST2700 support
hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus
hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus
hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus
hw/i2c/aspeed: Support discontinuous register memory region of I2C bus
hw/gpio/aspeed_gpio: Avoid shift into sign bit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 suppo

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".

The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.

Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It h

hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.

It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.

Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.

Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.

The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>

show more ...

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back

hw/i2c/aspeed: Add AST2700 support

Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.

Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.

An I2C controller registers owns 8KB address space.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used

hw/i2c/aspeed: Introduce a new dma_dram_offset attribute in AspeedI2Cbus

The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.

To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.

Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.

Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.

The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are di

hw/i2c/aspeed: Support discontinuous poll buffer memory region of I2C bus

It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.

Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer

Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool

hw/i2c/aspeed: Introduce a new bus pool buffer attribute in AspeedI2Cbus

According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.

To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.

Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.

Incrementing the version of aspeed_i2c_bus_vmstate to 6.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuo

hw/i2c/aspeed: Support discontinuous register memory region of I2C bus

It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.

Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15

Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove now-unused device_class_set_parent_reset()
* reset: introduce device_class_set_legacy_reset()
* reset: remove unneeded transitional machinery
* kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
* hvf: arm: Implement and use hvf_get_physical_address_range
so VMs can have larger-than-36-bit IPA spaces when the host
supports this
* target/arm/tcg: refine cache descriptions with a wrapper
* hw/net/can/xlnx-versal-canfd: fix various bugs
* MAINTAINERS: update versal, CAN maintainer entries
* hw/intc/arm_gic: fix spurious level triggered interrupts

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmbkVokZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pR5D/0ZJzJi7C0HIa4KYuBkcpZQ
# M3iUa1uiZoCniXlWuKFt2rUBrmhbW30YHw5gQjnxoUO4VVqREkFi3e5nzUKRQmvP
# FRm8dnuC36qwQJFhm+rQqUb8/AyqrVFnIaHhn7dBKLwRFm9+kbZ0v9x1Eq1DZk3S
# mijBQRiOjrj+FRkmyNJLhylGpm+p9VRdnBjmUtN2Yw+2fPkHmUURRSUvhwCK4BB5
# AvKgMC0EIIsLJKLfrWzk/EsYC8ogrGitISzFt8iWLAqxuxtuhv1StstleD4mZMK8
# gH+ZH5tsls2IiTIKkHfcbUcA55efDrQHGDat7n1Q0EWqOjET0soES+GpS0Jj6IXK
# uOnsDZ7MLFU/SbpckicLQ/JwNi3HiIfQgBVB2aJZ+cg8CGqaQCI5ZvWs7XFpUgkb
# naA4IR5mdNgXJm7ttBKbWarPNcmdODqa/5YDjXdyHmMx3JD994k1y5LIi3o69TgI
# rgHzU8ChZqaBDEvNa5KGtadQPnaSBP15Yqbp5rn2knVRKjDdyCdB94aWO5tZkmaO
# ARFmNk6h5bhwXdXl2Hu67RS2Kd0/fHMFWsxyHAX4NYT+Vq+ZTjLdaPzwFdfA0yAz
# wXWn0EAeYQ5M2xOPfDM/JYSc1THSzhpwy/CBrRjrCRZMDE+bx9BRC7pUXwquE8xF
# CW1NUxkvZikQeiMzgEBbTA==
# =u6u8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 16:13:13 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm: (27 commits)
hw/intc/arm_gic: fix spurious level triggered interrupts
MAINTAINERS: Add my-self as CAN maintainer
MAINTAINERS: Update Xilinx Versal OSPI maintainer's email address
MAINTAINERS: Remove Vikram Garhwal as maintainer
hw/net/can/xlnx-versal-canfd: Fix FIFO issues
hw/net/can/xlnx-versal-canfd: Simplify DLC conversions
hw/net/can/xlnx-versal-canfd: Fix byte ordering
hw/net/can/xlnx-versal-canfd: Handle flags correctly
hw/net/can/xlnx-versal-canfd: Translate CAN ID registers
hw/net/can/xlnx-versal-canfd: Fix CAN FD flag check
hw/net/can/xlnx-versal-canfd: Fix interrupt level
target/arm/tcg: refine cache descriptions with a wrapper
hvf: arm: Implement and use hvf_get_physical_address_range
hvf: Split up hv_vm_create logic per arch
hw/boards: Add hvf_get_physical_address_range to MachineClass
kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
hw/core/resettable: Remove transitional_function machinery
hw/core/qdev: Simplify legacy_reset handling
hw: Remove device_phases_reset()
hw: Rename DeviceClass::reset field to legacy_reset
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 suppo

hw/i2c/aspeed: Add support for 64 bit addresses

ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.

The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".

The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.

Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>

show more ...