Merge tag 'hw-misc-20240913' of https://github.com/philmd/qemu into staging

Misc HW & UI patches

- Remove deprecated SH4 SHIX machine TC58128 NAND EEPROM (Phil)
- Remove deprecated CRIS target (Phi

Merge tag 'hw-misc-20240913' of https://github.com/philmd/qemu into staging

Misc HW & UI patches

- Remove deprecated SH4 SHIX machine TC58128 NAND EEPROM (Phil)
- Remove deprecated CRIS target (Phil)
- Remove deprecated RISC-V 'any' CPU type (Phil)
- Add fifo8_peek_buf() to correctly handle FIFO wraparound (Mark)
- Minor cleanups in Designware PCIe, PL011 and loongson IPI models (Phil)
- Fixes in TI TMP105 temperature (Guenter)
- Convert Sun ESCC and ADB mouses to QemuInputHandler (Mark)
- Prevent heap overflow in VIRTIO sound device (Volker)
- Cleanups around g_assert_not_reached() call (Pierrick)
- Add Clément as VT-d reviewer (Clément)
- Prevent stuck modifier keys and unexpected text input on Windows (Volker)
- Explicitly set SDL2 swap interval when OpenGL is enabled (Gert)

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmbkoOUACgkQ4+MsLN6t
# wN56SBAA1nYl5YTI0BwvToKysoNIJ5aTgDEbT87XYTatKYyWYlN5W1yrAeMcuwFO
# Rw8edtn2YY89ZMG/LPcY1h6+nI2qVMpuOzNP3ve4D+eM6AMUMX0bzeqXndUind7c
# 1kTcV7Wctfk34zzs5B9GIU0WswSSbL3FeETS47ySNg6J7GbVWIu41dh52oeg8XWa
# Zfw0FZDt7hSAbsUckBIC9/Nbh0hucxBnQevQLkVb6u8O0yX3wV2OZRIC7+NkvHkH
# ZLPT8lg197PitH0NouUJI5oMv5Ty3PXGHtrIAKvts+fGBpWL+XzEtQmT8RzqgxTl
# 9Z6C/PvfMHNtA7BE66D4iLOKBPpV0RCUDOAGsfcWy5GuklzeUy03DxZ/2xO8XERm
# TP0EP0nt2YddnELX7H65b78gJkPvnhME/MtA6Y6R7uxAA8gawZVWZQ1oDGUBNGDI
# zJ62Cu4nYPwpGiewwb+ZTkjeiaYddJsPNsE8f8d4XZCpTwpIM/oYzJapxedBwjrg
# a4eAWiy7xIvvGPxWN7IQPosGYcyO6zhbI+iAbxp1xmWsX0TPgLUcJtK9+pklqWS7
# 9ucrvkq5XRZSJMaGF0LZuZH7Qx6us7m0rik5wG96d8qrIXRpi8kXfWxI17SWQkGa
# cG91u+FrKmfBr+yD7Q1gVbaYzkD+X1hPkQmSVmnlNS+5axrnSYQ=
# =sPwb
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 21:30:29 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* tag 'hw-misc-20240913' of https://github.com/philmd/qemu: (60 commits)
ui: remove break after g_assert_not_reached()
ui/sdl2: set swap interval explicitly when OpenGL is enabled
ui/sdl2: ignore GUI keys in SDL_TEXTINPUT handler
ui/sdl2: release all modifiers
system: replace assert(0) with g_assert_not_reached()
hw/pci-host: remove break after g_assert_not_reached()
hw/misc: remove break after g_assert_not_reached()
hw/gpio: remove break after g_assert_not_reached()
hw/watchdog: replace assert(0) with g_assert_not_reached()
hw/core: replace assert(0) with g_assert_not_reached()
hw/char: replace assert(0) with g_assert_not_reached()
hw/input/adb-mouse: convert to use QemuInputHandler
hw/char/escc: convert Sun mouse to use QemuInputHandler
hw/sensor/tmp105: Lower 4 bit of limit registers are always 0
hw/sensor/tmp105: OS (one-shot) bit in config register always returns 0
hw/sensor/tmp105: Pass 'oneshot' argument to tmp105_alarm_update()
hw/sensor/tmp105: Use registerfields API
hw/sensor/tmp105: Coding style fixes
tests/unit: Comment FIFO8 tests
tests/unit: Expand test_fifo8_peek_buf_wrap() coverage
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/gpio: remove break after g_assert_not_reached()

Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):

error: contro

hw/gpio: remove break after g_assert_not_reached()

Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):

error: control reaches end of non-void function [-Werror=return-type]
default:
g_assert_not_reached();
break;
| ^^^^^

Solve that by removing the unreachable 'break' statement, unifying
the code base on g_assert_not_reached() instead.

Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-28-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove

Merge tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* s390: convert s390 virtio-ccw and CPU to three-phase reset
* reset: remove now-unused device_class_set_parent_reset()
* reset: introduce device_class_set_legacy_reset()
* reset: remove unneeded transitional machinery
* kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
* hvf: arm: Implement and use hvf_get_physical_address_range
so VMs can have larger-than-36-bit IPA spaces when the host
supports this
* target/arm/tcg: refine cache descriptions with a wrapper
* hw/net/can/xlnx-versal-canfd: fix various bugs
* MAINTAINERS: update versal, CAN maintainer entries
* hw/intc/arm_gic: fix spurious level triggered interrupts

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmbkVokZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pR5D/0ZJzJi7C0HIa4KYuBkcpZQ
# M3iUa1uiZoCniXlWuKFt2rUBrmhbW30YHw5gQjnxoUO4VVqREkFi3e5nzUKRQmvP
# FRm8dnuC36qwQJFhm+rQqUb8/AyqrVFnIaHhn7dBKLwRFm9+kbZ0v9x1Eq1DZk3S
# mijBQRiOjrj+FRkmyNJLhylGpm+p9VRdnBjmUtN2Yw+2fPkHmUURRSUvhwCK4BB5
# AvKgMC0EIIsLJKLfrWzk/EsYC8ogrGitISzFt8iWLAqxuxtuhv1StstleD4mZMK8
# gH+ZH5tsls2IiTIKkHfcbUcA55efDrQHGDat7n1Q0EWqOjET0soES+GpS0Jj6IXK
# uOnsDZ7MLFU/SbpckicLQ/JwNi3HiIfQgBVB2aJZ+cg8CGqaQCI5ZvWs7XFpUgkb
# naA4IR5mdNgXJm7ttBKbWarPNcmdODqa/5YDjXdyHmMx3JD994k1y5LIi3o69TgI
# rgHzU8ChZqaBDEvNa5KGtadQPnaSBP15Yqbp5rn2knVRKjDdyCdB94aWO5tZkmaO
# ARFmNk6h5bhwXdXl2Hu67RS2Kd0/fHMFWsxyHAX4NYT+Vq+ZTjLdaPzwFdfA0yAz
# wXWn0EAeYQ5M2xOPfDM/JYSc1THSzhpwy/CBrRjrCRZMDE+bx9BRC7pUXwquE8xF
# CW1NUxkvZikQeiMzgEBbTA==
# =u6u8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Sep 2024 16:13:13 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240913' of https://git.linaro.org/people/pmaydell/qemu-arm: (27 commits)
hw/intc/arm_gic: fix spurious level triggered interrupts
MAINTAINERS: Add my-self as CAN maintainer
MAINTAINERS: Update Xilinx Versal OSPI maintainer's email address
MAINTAINERS: Remove Vikram Garhwal as maintainer
hw/net/can/xlnx-versal-canfd: Fix FIFO issues
hw/net/can/xlnx-versal-canfd: Simplify DLC conversions
hw/net/can/xlnx-versal-canfd: Fix byte ordering
hw/net/can/xlnx-versal-canfd: Handle flags correctly
hw/net/can/xlnx-versal-canfd: Translate CAN ID registers
hw/net/can/xlnx-versal-canfd: Fix CAN FD flag check
hw/net/can/xlnx-versal-canfd: Fix interrupt level
target/arm/tcg: refine cache descriptions with a wrapper
hvf: arm: Implement and use hvf_get_physical_address_range
hvf: Split up hv_vm_create logic per arch
hw/boards: Add hvf_get_physical_address_range to MachineClass
kvm: Use 'unsigned long' for request argument in functions wrapping ioctl()
hw/core/resettable: Remove transitional_function machinery
hw/core/qdev: Simplify legacy_reset handling
hw: Remove device_phases_reset()
hw: Rename DeviceClass::reset field to legacy_reset
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXA

Merge tag 'pull-20231230' of https://gitlab.com/rth7680/qemu into staging

Mark VMStateField and VMStateDescription arrays const.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWPOFsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8cCQgAnQjy3Ic1i225AElh
# 0Ph3Aiw6WT9pECLoKmyroxHbTGuaEJoIXeaOhMAnowCTBLoKRR3/Ooq0DGOW+l/Z
# f5PwWSkjkb+OcS+dj/kgQBu58/Gk5G8ogksqKQvci8k2okhjHmITSQDu0dtwzDZr
# jVGh3gmGoat73jQyD/nAwgWFawlLkklOMR/yvnFX7EJIBepRVbkMPayoKlB+6W07
# 1kqhSwoI0vQCjhJ3Q7Q0GC4rrHK3KUq7o/25yvICf4EgPKfsaym1wAjDhdKToixl
# 9T+ALZG8SiZZkBlb6l3QZ7pqtqavxYtPdZ2Gx/nMu0RRu4G33d5AVGHRrXj9qttW
# 5mL7ZQ==
# =uQ4C
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 29 Dec 2023 21:21:31 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-20231230' of https://gitlab.com/rth7680/qemu: (71 commits)
docs: Constify VMstate in examples
tests/unit/test-vmstate: Constify VMState
util/fifo8: Constify VMState
replay: Constify VMState
system: Constify VMState
migration: Constify VMState
cpu-target: Constify VMState
backends: Constify VMState
audio: Constify VMState
hw/misc/macio: Constify VMState
hw/watchdog: Constify VMState
hw/virtio: Constify VMState
hw/vfio: Constify VMState
hw/usb: Constify VMState
hw/tpm: Constify VMState
hw/timer: Constify VMState
hw/ssi: Constify VMState
hw/sparc: Constify VMState
hw/sensor: Constify VMState
hw/sd: Constify VMState
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/gpio: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-29-richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20230824' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/gpio/nrf51: implement DETECT signal
* accel/kvm: Specify default IPA siz

Merge tag 'pull-target-arm-20230824' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* hw/gpio/nrf51: implement DETECT signal
* accel/kvm: Specify default IPA size for arm64
* ptw: refactor, fix some FEAT_RME bugs
* target/arm: Adjust PAR_EL1.SH for Device and Normal-NC memory types
* target/arm/helper: Implement CNTHCTL_EL2.CNT[VP]MASK
* Fix SME ST1Q
* Fix 64-bit SSRA

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmTnIoUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vufEACPJcwyFvSBHDv4VQ6tbgOU
# zwjpUMv4RMKhCOjuxBlJ2DICwOcGNuKer0tc6wkH2T5Ebhoego1osYbRZZoawAJf
# ntg+Ndrx1QH9ORuGqYccLXtHnP741KiKggDHM05BJqB7rqtuH+N4fEn7Cdsw/DNg
# XuCYD5QrxMYvkSOD1l8W0aqp81ucYPgkFqLufypgxrXUiRZ1RBAmPF47BFFdnM8f
# NmrmT1LTF5jr70ySRB+ukK6BAGDc0CUfs6R6nYRwUjRPmSG2rrtUDGo+nOQGDqJo
# PHWmt7rdZQG2w7HVyE/yc3h/CQ3NciwWKbCkRlaoujxHx/B6DRynSeO3NXsP8ELu
# Gizoi3ltwHDQVIGQA19P5phZKHZf7x3MXmK4fDBGB9znvoSFTcjJqkdaN/ARXXO3
# e1vnK1MqnPI8Z1nGdeVIAUIrqhtLHnrrM7jf1tI/e4sjpl3prHq2PvQkakXu8clr
# H8bPZ9zZzyrrSbl4NhpaFTsUiYVxeLoJsNKAmG8dHb+9YsFGXTvEBhtR9eUxnbaV
# XyZ3jEdeW7/ngQ4C6XMD2ZDiKVdx2xJ2Pp5npvljldjmtGUvwQabKo+fPDt2fKjM
# BwjhHA50I633k4fYIwm8YOb70I4oxoL9Lr6PkKriWPMTI5r7+dtwgigREVwnCn+Y
# RsiByKMkDO2TcoQjvBZlCA==
# =3MJ8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Aug 2023 05:27:33 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230824' of https://git.linaro.org/people/pmaydell/qemu-arm: (35 commits)
target/arm: Fix 64-bit SSRA
target/arm: Fix SME ST1Q
target/arm/helper: Implement CNTHCTL_EL2.CNT[VP]MASK
target/arm/helper: Check SCR_EL3.{NSE, NS} encoding for AT instructions
target/arm: Pass security space rather than flag for AT instructions
target/arm: Skip granule protection checks for AT instructions
target/arm/helper: Fix tlbmask and tlbbits for TLBI VAE2*
target/arm/ptw: Load stage-2 tables from realm physical space
target/arm: Adjust PAR_EL1.SH for Device and Normal-NC memory types
target/arm/ptw: Report stage 2 fault level for stage 2 faults on stage 1 ptw
target/arm/ptw: Check for block descriptors at invalid levels
target/arm/ptw: Set attributes correctly for MMU disabled data accesses
target/arm/ptw: Drop S1Translate::out_secure
target/arm/ptw: Remove S1Translate::in_secure
target/arm/ptw: Remove last uses of ptw->in_secure
target/arm/ptw: Only fold in NSTable bit effects in Secure state
target/arm: Pass an ARMSecuritySpace to arm_is_el2_enabled_secstate()
target/arm/ptw: Pass an ARMSecuritySpace to arm_hcr_el2_eff_secstate()
target/arm/ptw: Pass ARMSecurityState to regime_translation_disabled()
target/arm/ptw: Pass ptw into get_phys_addr_pmsa*() and get_phys_addr_disabled()
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/gpio/nrf51: implement DETECT signal

Implement nRF51 DETECT signal in the GPIO peripheral.

The reference manual makes mention of a per-pin DETECT signal, but these
are not exposed to the user. Se

hw/gpio/nrf51: implement DETECT signal

Implement nRF51 DETECT signal in the GPIO peripheral.

The reference manual makes mention of a per-pin DETECT signal, but these
are not exposed to the user. See https://devzone.nordicsemi.com/f/nordic-q-a/39858/gpio-per-pin-detect-signal-available
for more information. Currently, I don't see a reason to model these.

Signed-off-by: Chris Laplante <chris@laplante.io>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230728160324.1159090-2-chris@laplante.io
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend o

Include migration/vmstate.h less

In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Include hw/irq.h a lot less

In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

Include hw/irq.h a lot less

In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts res

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190325' into staging

target-arm queue:
* Fix non-parallel expansion of CASP
* nrf51_gpio: reflect pull-up/pull-down to IRQs
*

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190325' into staging

target-arm queue:
* Fix non-parallel expansion of CASP
* nrf51_gpio: reflect pull-up/pull-down to IRQs
* Fix crash if guest tries to enable non-existent PMU counters
* Add PMUv2 to the Cortex-A15 and Cortex-A7
* Make pmccntr_op_start/finish static

# gpg: Signature made Mon 25 Mar 2019 14:19:47 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190325:
target/arm: make pmccntr_op_start/finish static
target/arm: cortex-a7 and cortex-a15 have pmus
target/arm: fix crash on pmu register access
target/arm: add PCI_TESTDEV back to default config
nrf51_gpio: reflect pull-up/pull-down to IRQs
target/arm: Fix non-parallel expansion of CASP

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

nrf51_gpio: reflect pull-up/pull-down to IRQs

Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_op

nrf51_gpio: reflect pull-up/pull-down to IRQs

Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c).
When the GPIO is set to input, the pull-up resistor brings the output
to 1, while when the GPIO is set to output, the output driver brings
the output to 0.

Implement this for the nRF51 GPIO device model. First, if both input and
output are floating, and there is a pull-up or pull-down resistor
configured, do not just set s->in, but also make any devices listening
on the output qemu_irq receive that value. Second, if the pin is
driven both internally (output pin) and externally you don't get a
short circuit if both sides drive the pin to the same value.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190317141001.3346-1-pbonzini@redhat.com
[PMM: wrapped long line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging

target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging

target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs

# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral

This adds a model of the nRF51 GPIO peripheral.

Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf

The nRF51 series microcontrol

hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral

This adds a model of the nRF51 GPIO peripheral.

Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf

The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).

The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.

Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...