Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add

Merge tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* Emulate FEAT_NV, FEAT_NV2
* add cache controller for Freescale i.MX6
* Add minimal support for the B-L475E-IOT01A board
* Allow SoC models to configure M-profile CPUs with correct number
of NVIC priority bits
* Add missing QOM parent for v7-M SoCs
* Set CTR_EL0.{IDC,DIC} for the 'max' CPU
* hw/intc/arm_gicv3_cpuif: handle LPIs in in the list registers

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWfypMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sleD/4tQOMteba5BNMDns6R96E4
# kj5q0Iy9XyzQ486Q4cIZXI5N3BddCp2ks8WeS2W3w4IT/lms0U6UwXV4E98I4I/b
# KSfOoUd/cp8IvdvzfpWbmQcPMoauHZdCUN33pYYXOjfi1RkpzgNU5Qgh09Nl/xYU
# V3oaEvWhLtepT/fwJLYxoqVHDaEmyW+6zriF0+eGjZvkhgPyhllla9eti7AyHTfH
# T3A4Fyx/wudRE3NP6xsLfxldriJTxQeba+TqLSh3IXn/PMtK13/ARsY/hl72Q4ML
# Fgad8Zho4eXbuOQ9oiqb7gp4K3IKd9/8FbCzECoIAq7AnLAD4KwpLQR8GULRvYW3
# 0eQq2txTXQWNcmWpIyDRRME+qeNVwWSk+QJDs5WuhVqlVQ4hpqtgFf1EX+7ORdS1
# WG0fb8etvr8oCSkzCmP/o6xYGJ0EyTVMU5DmWviy3bxMrUMcmobjvCQr/n2gC713
# 1NDmEaYPbl+pX8EMu8byst7/No2PXRgIO0UVVb4KZybfhNy+BBs+LiMVlSRS5YH4
# 8NWtoYZlG9RcPnY+8Xrxz9VTi2cNAAcdbf5uK3snJxkFV2SmV3oBoMxWen3mee0f
# 2PNVEbt9zvPV8hViBVLsqRhVXd9wMq6motIRlkKge1u1TvwIxO21ibykI3tvYOGv
# BffIjhUdnYtX90JAtXtFDw==
# =yQwf
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:01:39 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240111' of https://git.linaro.org/people/pmaydell/qemu-arm: (41 commits)
target/arm: Add FEAT_NV2 to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Enhance CPU_LOG_INT to show SPSR on AArch64 exception-entry
target/arm: Report HCR_EL2.{NV,NV1,NV2} in cpu dumps
hw/intc/arm_gicv3_cpuif: Mark up VNCR offsets for GIC CPU registers
target/arm: Mark up VNCR offsets (offsets >= 0x200, except GIC)
target/arm: Mark up VNCR offsets (offsets 0x168..0x1f8)
target/arm: Mark up VNCR offsets (offsets 0x100..0x160)
target/arm: Mark up VNCR offsets (offsets 0x0..0xff)
target/arm: Report VNCR_EL2 based faults correctly
target/arm: Implement FEAT_NV2 redirection of sysregs to RAM
target/arm: Handle FEAT_NV2 redirection of SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2
target/arm: Handle FEAT_NV2 changes to when SPSR_EL1.M reports EL2
target/arm: Implement VNCR_EL2 register
target/arm: Handle HCR_EL2 accesses for FEAT_NV2 bits
target/arm: Add FEAT_NV to max, neoverse-n2, neoverse-v1 CPUs
target/arm: Handle FEAT_NV page table attribute changes
target/arm: Treat LDTR* and STTR* as LDR/STR when NV, NV1 is 1, 1
target/arm: Don't honour PSTATE.PAN when HCR_EL2.{NV, NV1} == {1, 1}
target/arm: Always use arm_pan_enabled() when checking if PAN is enabled
target/arm: Trap registers when HCR_EL2.{NV, NV1} == {1, 1}
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Add missing QOM parent for v7-M SoCs

QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().

Signed-off-by: Philippe Mathieu-Da

hw/arm: Add missing QOM parent for v7-M SoCs

QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240104141159.53883-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits s

Merge tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
* enable FEAT_RNG on Neoverse-N2
* hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
* Fix SME FMOPA (16-bit), BFMOPA
* hw/core/machine: Constify MachineClass::valid_cpu_types[]
* stm32f* machines: Report error when user asks for wrong CPU type
* hw/arm/fsl-imx: Do not ignore Error argument

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVchLYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kHMD/47tKxzrsXc6+V9esRQGi2H
# 1hAgLBwglEdxLXokF+Di41sh/fvK7wYVXO/hiWlq+9h3kG3D/u1N5r1TdMPMUb9j
# 4Sg3rOejn7nzkxVZ6MZ/K/1j84C9bfrt4sboVHZVRvWuvbiyuTuivEr4IqLYO4x3
# AIwhFMQ5gbNrmClZh/DBxj0keO13cp63Fg2JSSICdi+1Dw9rRXTyhJloMu1omeqc
# k/BXzjSeNXpLSMyGWBR3uaPcJBaGC1xnz3Z1V7fUY1EYD2Cu1oo5lEZ9aNO5t30d
# XW/qVGLa3b1Cb7WuEO247RnU3N2oZotozjFtdj/8IQoYWspM9RHyipEimUlegVdO
# 3fpu8QGsN1ljNiwjdk0i6OwS7SGxcPtteFOaqEf/Yogj4EOKTn/Rx5TT4vJ5DhmI
# 2w/9J15JWDIE1paNwecuFWbxCOOzSsOtSxzuyLSZDU3GlNfJ4zoF6YboROLYfejy
# NXZABFhGd/0ykX7r0VY1GGYXUQ+akv6q+VDmVZCP9gMiRUiqmFPwMLMLlcuHb8G5
# 8UztN5SvOG2EYXj28Zx0BnGCNiGdI15rWMb0veqAtbnn3yEdltW3O475BAhZ0PB7
# OVpLWnXwmWURm/BGlwb1PH5s3kgWgzOebcBgcnCftwFQ8EedQAQDA5FmT+nK5SfV
# VoOf89PngTubU6B3BOfeBw==
# =thIa
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Nov 2023 05:21:42 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20231121' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm/fsl-imx: Do not ignore Error argument
hw/arm/stm32f100: Report error when incorrect CPU is used
hw/arm/stm32f205: Report error when incorrect CPU is used
hw/arm/stm32f405: Report error when incorrect CPU is used
hw/core/machine: Constify MachineClass::valid_cpu_types[]
target/arm: Fix SME FMOPA (16-bit), BFMOPA
hw/intc/arm_gicv3: ICC_PMR_EL1 high bits should be RAZ
target/arm: enable FEAT_RNG on Neoverse-N2

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/arm/stm32f405: Report error when incorrect CPU is used

Both 'netduinoplus2' and 'olimex-stm32-h405' machines ignore the
CPU type requested by the command line. This might confuse users,
since the

hw/arm/stm32f405: Report error when incorrect CPU is used

Both 'netduinoplus2' and 'olimex-stm32-h405' machines ignore the
CPU type requested by the command line. This might confuse users,
since the following will create a machine with a Cortex-M4 CPU:

$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f

Set the MachineClass::valid_cpu_types field (introduced in commit
c9cf636d48 "machine: Add a valid_cpu_types property").
Remove the now unused MachineClass::default_cpu_type field.

We now get:

$ qemu-system-aarch64 -M netduinoplus2 -cpu cortex-r5f
qemu-system-aarch64: Invalid CPU type: cortex-r5f-arm-cpu
The valid types are: cortex-m4-arm-cpu

Since the SoC family can only use Cortex-M4 CPUs, hard-code the
CPU type name at the SoC level, removing the QOM property
entirely.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20231117071704.35040-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu into staging

Add cortex-a35.
Fix bcm2835 framebuffer for rpi firmware.
Add FEAT_ETS.
Add FEAT_PMUv3p5.
Cleanups to armv7m_load_kernel

Merge tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu into staging

Add cortex-a35.
Fix bcm2835 framebuffer for rpi firmware.
Add FEAT_ETS.
Add FEAT_PMUv3p5.
Cleanups to armv7m_load_kernel.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMhwAsdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/7Xgf9Ezg+etwsEzY0EWtH
# yoQ7ymJHM1VKqtLkbk9U+Ju18YHEi3fwbYbfLgzkAMFHKDUteKJivKm2w41tsw5g
# lE+5PojQT3k8PffaqeFzKG/JsDPoqKtTa23WjkafbIQAbjRT8JtmF/JmSLaaxyqW
# DozPXJ9jXMS+Q2BxHnoCBuy/Kb3zsqekCr8DOgUIXY5gcAB6q1I8SMX2BrhsIyvV
# vZxNm+hFDCOJtXvkAekMrwGkiIBYoBNpswnv40ldeSvRtD8tnty73JUt+AnWoCwi
# zH4k+CvWICIuZT7oxVecRhlOojtaP5cUTXs0+zhk6GxEx/X6wmXd42heO9ZJL0y1
# 6FH0xw==
# =ohPU
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Sep 2022 07:50:35 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* tag 'pull-arm-20220914' of https://gitlab.com/rth7680/qemu:
target/arm: Make boards pass base address to armv7m_load_kernel()
target/arm: Remove useless TARGET_BIG_ENDIAN check in armv7m_load_kernel()
target/arm: Report FEAT_PMUv3p5 for TCG '-cpu max'
target/arm: Support 64-bit event counters for FEAT_PMUv3p5
target/arm: Implement FEAT_PMUv3p5 cycle counter disable bits
target/arm: Rename pmu_8_n feature test functions
target/arm: Detect overflow when calculating next PMU interrupt
target/arm: Honour MDCR_EL2.HPMD in Secure EL2
target/arm: Ignore PMCR.D when PMCR.LC is set
target/arm: Don't mishandle count when enabling or disabling PMU counters
target/arm: Correct value returned by pmu_counter_mask()
target/arm: Don't corrupt high half of PMOVSR when cycle counter overflows
target/arm: Add missing space in comment
target/arm: Advertise FEAT_ETS for '-cpu max'
target/arm: Implement ID_DFR1
target/arm: Implement ID_MMFR5
target/arm: Sort KVM reads of AArch32 ID registers into encoding order
target/arm: Make cpregs 0, c0, c{3-15}, {0-7} correctly RAZ in v8
hw/arm/bcm2835_property: Add support for RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS
target/arm: Add cortex-a35

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/arm: Make boards pass base address to armv7m_load_kernel()

Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that

target/arm: Make boards pass base address to armv7m_load_kernel()

Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)

Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210901' into staging

* Refactor M-profile systick to use Clocks instead of system_clock_scale global
* clock: Provide builtin

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210901' into staging

* Refactor M-profile systick to use Clocks instead of system_clock_scale global
* clock: Provide builtin multiplier/divider
* Add A64FX processor model
* Enable MVE emulation in Cortex-M55
* hw: Add compat machines for 6.2
* hw/intc/arm_gicv3: Replace mis-used MEMTX_* constants by booleans
* hw/arm/raspi: Remove deprecated raspi2/raspi3 aliases

# gpg: Signature made Wed 01 Sep 2021 11:35:57 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210901: (51 commits)
arm: Remove system_clock_scale global
hw/timer/stellaris-gptm: Use Clock input instead of system_clock_scale
hw/arm/stellaris: Split stellaris-gptm into its own file
hw/arm/stellaris: Fix code style issues in GPTM code
hw/timer/armv7m_systick: Use clock inputs instead of system_clock_scale
hw/arm/msf2-soc: Wire up refclk
hw/arm/msf2: Use Clock input to MSF2_SOC instead of m3clk property
hw/arm/msf2_soc: Don't allocate separate MemoryRegions
hw/arm/stellaris: Wire sysclk up to armv7m
hw/arm/stellaris: split stellaris_sys_init()
hw/arm/nrf51: Wire up sysclk
hw/arm/stm32vldiscovery: Delete trailing blank line
hw/arm/stm32f405: Wire up sysclk and refclk
hw/arm/stm32f205: Wire up sysclk and refclk
hw/arm/stm32f100: Wire up sysclk and refclk
hw/arm: Don't allocate separate MemoryRegions in stm32 SoC realize
clock: Provide builtin multiplier/divider
hw/arm/mps2.c: Connect up armv7m clocks
armsse: Wire up systick cpuclk clock
hw/arm/armv7m: Create input clocks
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all th

arm: Remove system_clock_scale global

All the devices that used to use system_clock_scale have now been
converted to use Clock inputs instead, so the global is no longer
needed; remove it and all the code that sets it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210812093356.1946-26-peter.maydell@linaro.org

show more ...

hw/arm/stm32f405: Wire up sysclk and refclk

Wire up the sysclk and refclk for the stm32f405 SoC. This SoC always
runs the systick refclk at 1/8 the frequency of the main CPU clock,
so the board cod

hw/arm/stm32f405: Wire up sysclk and refclk

Wire up the sysclk and refclk for the stm32f405 SoC. This SoC always
runs the systick refclk at 1/8 the frequency of the main CPU clock,
so the board code only needs to provide a single sysclk clock.

Because there is only one board using this SoC, we convert the SoC
and the board together, rather than splitting it into "add clock to
SoC; connect clock in board; add error check in SoC code that clock
is wired up".

When the systick device starts honouring its clock inputs, this will
fix an emulation inaccuracy in the netduinoplus2 board where the
systick reference clock was running at 1MHz rather than 21MHz.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210812093356.1946-14-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210203' into staging

target-arm queue:
* hw/intc/arm_gic: Allow to use QTest without crashing
* hw/char/exynos4210_uart: Fix b

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210203' into staging

target-arm queue:
* hw/intc/arm_gic: Allow to use QTest without crashing
* hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
* hw/char/exynos4210_uart: Fix missing call to report ready for input
* hw/arm/smmuv3: Fix addr_mask for range-based invalidation
* hw/ssi/imx_spi: Fix various minor bugs
* hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
* hw/arm: Add missing Kconfig dependencies
* hw/arm: Display CPU type in machine description

# gpg: Signature made Wed 03 Feb 2021 10:16:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210203: (21 commits)
hw/arm: Display CPU type in machine description
hw/net/can: ZynqMP CAN device requires PTIMER
hw/arm/xlnx-versal: Versal SoC requires ZynqMP peripherals
hw/arm/xlnx-versal: Versal SoC requires ZDMA
hw/arm/exynos4210: Add missing dependency on OR_IRQ
hw/arm/stm32f405_soc: Add missing dependency on OR_IRQ
hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
hw/ssi: imx_spi: Correct tx and rx fifo endianness
hw/ssi: imx_spi: Correct the burst length > 32 bit transfer logic
hw/ssi: imx_spi: Round up the burst length to be multiple of 8
hw/ssi: imx_spi: Disable chip selects when controller is disabled
hw/ssi: imx_spi: Rework imx_spi_write() to handle block disabled
hw/ssi: imx_spi: Rework imx_spi_read() to handle block disabled
hw/ssi: imx_spi: Rework imx_spi_reset() to keep CONREG register value
hw/ssi: imx_spi: Remove pointless variable initialization
hw/ssi: imx_spi: Remove imx_spi_update_irq() in imx_spi_reset()
hw/ssi: imx_spi: Use a macro for number of chip selects supported
hw/arm/smmuv3: Fix addr_mask for range-based invalidation
hw/char/exynos4210_uart: Fix missing call to report ready for input
hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Display CPU type in machine description

Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.

Signed-of

hw/arm: Display CPU type in machine description

Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200803' into staging

target-arm queue:
* hw/timer/imx_epit: Avoid assertion when CR.SWR is written
* netduino2, netduinoplus2,

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200803' into staging

target-arm queue:
* hw/timer/imx_epit: Avoid assertion when CR.SWR is written
* netduino2, netduinoplus2, microbit: set system_clock_scale so that
SysTick running on the CPU clock works
* target/arm: Avoid maybe-uninitialized warning with gcc 4.9
* target/arm: Fix AddPAC error indication
* Make AIRCR.SYSRESETREQ actually reset the system for the
microbit, mps2-*, musca-*, netduino* boards

# gpg: Signature made Mon 03 Aug 2020 20:29:17 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200803:
hw/timer/imx_epit: Avoid assertion when CR.SWR is written
hw/arm/nrf51_soc: Set system_clock_scale
target/arm: Avoid maybe-uninitialized warning with gcc 4.9
target/arm: Fix AddPAC error indication
msf2-soc, stellaris: Don't wire up SYSRESETREQ
hw/intc/armv7m_nvic: Provide default "reset the system" behaviour for SYSRESETREQ
include/hw/irq.h: New function qemu_irq_is_connected()
hw/arm/netduino2, netduinoplus2: Set system_clock_scale

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/netduino2, netduinoplus2: Set system_clock_scale

The netduino2 and netduinoplus2 boards forgot to set the system_clock_scale
global, which meant that if guest code used the systick timer in "

hw/arm/netduino2, netduinoplus2: Set system_clock_scale

The netduino2 and netduinoplus2 boards forgot to set the system_clock_scale
global, which meant that if guest code used the systick timer in "use
the processor clock" mode it would hang because time never advances.

Set the global to match the documented CPU clock speed of these boards.
Judging by the data sheet this is slightly simplistic because the
SoC allows configuration of the SYSCLK source and frequency via the
RCC (reset and clock control) module, but we don't model that.

Fixes: https://bugs.launchpad.net/qemu/+bug/1876187
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200727162617.26227-1-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging

QOM patches for 2020-06-15

# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sysbus: Convert to sysbus_realize() etc. with Coccinelle

Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle sc

sysbus: Convert to sysbus_realize() etc. with Coccinelle

Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().

Coccinelle script:

@@
expression dev, errp;
@@
- qdev_realize(DEVICE(dev), NULL, errp);
+ sysbus_realize(SYS_BUS_DEVICE(dev), errp);

@@
expression sysbus_dev, dev, errp;
@@
+ sysbus_dev = SYS_BUS_DEVICE(dev);
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);
- sysbus_dev = SYS_BUS_DEVICE(dev);

@@
expression sysbus_dev, dev, errp;
expression expr;
@@
sysbus_dev = SYS_BUS_DEVICE(dev);
... when != dev = expr;
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);

@@
expression dev, errp;
@@
- qdev_realize_and_unref(DEVICE(dev), NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

@@
expression dev, errp;
@@
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);

Whitespace changes minimized manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]

show more ...

qdev: Convert uses of qdev_create() with Coccinelle

This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this se

qdev: Convert uses of qdev_create() with Coccinelle

This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.

Coccinelle script:

@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);

@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);

@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);

@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);

@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);

The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.

Missing #include "qapi/error.h" added manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200117-1' into staging

Add model of the Netduino Plus 2 board
Some allwinner-a10 code cleanup
New test cases for cubieboard
targ

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200117-1' into staging

Add model of the Netduino Plus 2 board
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts

# gpg: Signature made Fri 17 Jan 2020 14:27:40 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200117-1:
target/arm: Set ISSIs16Bit in make_issinfo
target/arm: Return correct IL bit in merge_syn_data_abort
arm/gicv3: update virtual irq state after IAR register read
target/arm: adjust program counter for wfi exception in AArch32
i.MX: add an emulation for RNGC
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
hw/arm/allwinner-a10: Remove local qemu_irq variables
hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()
hw/arm/allwinner-a10: Move SoC definitions out of header
tests/boot_linux_console: Add a SD card test for the CubieBoard
tests/boot_linux_console: Add initrd test for the CubieBoard
hw/arm: Add the Netduino Plus 2
hw/arm: Add the STM32F4xx SoC
hw/misc: Add the STM32F4xx EXTI device
hw/misc: Add the STM32F4xx Sysconfig device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Add the Netduino Plus 2

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: dad8d8d47f7625913e35e27a1c00f603a6b08f9a.15

hw/arm: Add the Netduino Plus 2

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: dad8d8d47f7625913e35e27a1c00f603a6b08f9a.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...