Merge tag 'pull-riscv-to-apply-20220927' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 7.2

* Fixup typos and register addresses for Ibex SPI
* Cleanup the RISC-V virt

Merge tag 'pull-riscv-to-apply-20220927' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for QEMU 7.2

* Fixup typos and register addresses for Ibex SPI
* Cleanup the RISC-V virt machine documentation
* Remove the sideleg and sedeleg CSR macros
* Fix the CSR check for cycle{h}, instret{h}, time{h}, hpmcounter3-31{h}
* Remove fixed numbering from GDB xml feature files
* Allow setting the resetvec for the OpenTitan machine
* Check the correct exception cause in vector GDB stub
* Fix inheritance of SiFiveEState
* Improvements to the RISC-V debugger spec
* Simplify some vector code

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmMymHIACgkQIeENKd+X
# cFQPxwf8DhYeJ+Ctsi9/fFTIHLAE3ciZ15Hf/BJGc5maeVGupYG64+9Cs0fGX4bY
# CBlmE5xqn8hanEQXTQxmbC3AoNyykRV+arUrdawlUrJR5hQy/PNVq4yTxFPHcEjJ
# bOsQxkMvMzZiWbJfG8SZObXfFZ+6HjWd2qjbCUwyVAa5mWDHsuPy22/RDcaR9KSV
# Sb217kNIY3a2WkDUrY84zqOfks3NDFA1GuCge7EcQGV9iPxH06KO3ANpGvCE/31i
# FnfA9qUu7ts+ls2lSj+2ARsZUzMciZuC3ggTRYIKbyf0QNTK6fILuzlMPPvf0ORZ
# vbq8rSTDPrWzmrLskba1jADbWPtiXA==
# =b3zl
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 27 Sep 2022 02:30:10 EDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20220927' of https://github.com/alistair23/qemu: (22 commits)
target/riscv: rvv-1.0: vf[w]redsum distinguish between ordered/unordered
target/riscv: rvv-1.0: Simplify vfwredsum code
target/riscv: debug: Add initial support of type 6 trigger
target/riscv: debug: Check VU/VS modes for type 2 trigger
target/riscv: debug: Create common trigger actions function
target/riscv: debug: Introduce tinfo CSR
target/riscv: debug: Restrict the range of tselect value can be written
target/riscv: debug: Introduce tdata1, tdata2, and tdata3 CSRs
target/riscv: debug: Introduce build_tdata1() to build tdata1 register content
target/riscv: debug: Determine the trigger type from tdata1.type
hw/riscv/sifive_e: Fix inheritance of SiFiveEState
target/riscv: Check the correct exception cause in vector GDB stub
hw/riscv: opentitan: Expose the resetvec as a SoC property
hw/riscv: opentitan: Fixup resetvec
target/riscv: Set the CPU resetvec directly
target/riscv: remove fixed numbering from GDB xml feature files
target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml
target/riscv: fix csr check for cycle{h}, instret{h}, time{h}, hpmcounter3-31{h}
target/riscv: Remove sideleg and sedeleg
docs/system: clean up code escape for riscv virt platform
...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

target/riscv: remove fixed numbering from GDB xml feature files

The fixed register numbering in the various GDB feature files for
RISC-V only exists because these files were originally copied from t

target/riscv: remove fixed numbering from GDB xml feature files

The fixed register numbering in the various GDB feature files for
RISC-V only exists because these files were originally copied from the
GDB source tree.

However, the fixed numbering only exists in the GDB source tree so
that GDB, when it connects to a target that doesn't provide a target
description, will use a specific numbering scheme.

That numbering scheme is designed to be compatible with the first
versions of QEMU (for RISC-V), that didn't send a target description,
and relied on a fixed numbering scheme.

Because of the way that QEMU manages its target descriptions,
recording the number of registers in each feature, and just relying on
GDB's numbering starting from 0, then I propose that we remove all the
fixed numbering from the RISC-V feature xml files, and just rely on
the standard numbering scheme. Plenty of other targets manage their
xml files this way, e.g. ARM, AArch64, Loongarch, m68k, rx, and s390.

Signed-off-by: Andrew Burgess <aburgess@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Message-Id: <6069395f90e6fc24dac92197be815fedf42f5974.1661934573.git.aburgess@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml

While testing some changes to GDB's handling for the RISC-V registers
fcsr, fflags, and frm, I spotted that QEMU includes these regist

target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml

While testing some changes to GDB's handling for the RISC-V registers
fcsr, fflags, and frm, I spotted that QEMU includes these registers
twice in the target description it sends to GDB, once in the fpu
feature, and once in the csr feature.

Right now things basically work OK, QEMU maps these registers onto two
different register numbers, e.g. fcsr maps to both 68 and 73, and GDB
can use either of these to access the register.

However, GDB's target descriptions don't really work this way, each
register should appear just once in a target description, mapping the
register name onto the number GDB should use when accessing the
register on the target. Duplicate register names actually result in
duplicate registers on the GDB side, however, as the registers have
the same name, the user can only access one of these registers.

Currently GDB has a hack in place, specifically for RISC-V, to spot
the duplicate copies of these three registers, and hide them from the
user, ensuring the user only ever sees a single copy of each.

In this commit I propose fixing this issue on the QEMU side, and in
the process, simplify the fpu register handling a little.

I think we should, remove fflags, frm, and fcsr from the two (32-bit
and 64-bit) fpu feature xml files. These files will only contain the
32 core floating point register f0 to f31. The fflags, frm, and fcsr
registers will continue to be advertised in the csr feature as they
currently are.

With that change made, I will simplify riscv_gdb_get_fpu and
riscv_gdb_set_fpu, removing the extra handling for the 3 status
registers.

Signed-off-by: Andrew Burgess <aburgess@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <0fbf2a5b12e3210ff3867d5cf7022b3f3462c9c8.1661934573.git.aburgess@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-rc0-2' into staging

RISC-V Patches for 4.0-rc0, Part 2

This patch set contains three major sources of bug fixes:

* Jim has ad

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-rc0-2' into staging

RISC-V Patches for 4.0-rc0, Part 2

This patch set contains three major sources of bug fixes:

* Jim has added support for GDB XML files, as well as fixing access to
CSRs via the GDB stub.
* Alistair has rebased a large set of fixes from Michael that were still
in his patch queue. These fix bugs all over our tree, including:
* Logging of PMP errors.
* User ABI cleanups and fixes, most notably on RVE guests.
* Fixes for interrupt emulation fidelity.
* Improvements to the emulation fidelity of the sifive_u machine.
* Bin Meng has improved the emulation fidelity of the SiFive UART, which
now supports both TX and RX interrupts (as well as setting the correct
interrupt line).

# gpg: Signature made Tue 19 Mar 2019 12:42:11 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.0-rc0-2:
riscv: sifive_u: Correct UART0's IRQ in the device tree
riscv: sifive_uart: Generate TX interrupt
target/riscv: Remove unused struct
riscv: sifive_u: Allow up to 4 CPUs to be created
RISC-V: Update load reservation comment in do_interrupt
RISC-V: Convert trap debugging to trace events
RISC-V: Add support for vectored interrupts
RISC-V: Change local interrupts from edge to level
RISC-V: linux-user support for RVE ABI
elf: Add RISC-V PSABI ELF header defines
RISC-V: Remove unnecessary disassembler constraints
RISC-V: Allow interrupt controllers to claim interrupts
RISC-V: Replace __builtin_popcount with ctpop8 in PLIC
riscv: pmp: Log pmp access errors as guest errors
RISC-V: Add hooks to use the gdb xml files.
RISC-V: Add debug support for accessing CSRs.
RISC-V: Fixes to CSR_* register macros.
RISC-V: Add 64-bit gdb xml files.
RISC-V: Add 32-bit gdb xml files.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

RISC-V: Add 64-bit gdb xml files.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-o

RISC-V: Add 64-bit gdb xml files.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

RISC-V: Add 32-bit gdb xml files.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-o

RISC-V: Add 32-bit gdb xml files.

Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...