libpldmresponder : Migrate to placement_new from reinterpret casting

reinterpret_cast is prohibited by the C++ core guidelines because
it takes the behavior outside the language definition and gives

libpldmresponder : Migrate to placement_new from reinterpret casting

reinterpret_cast is prohibited by the C++ core guidelines because
it takes the behavior outside the language definition and gives
problems with type safety. Placement-new on the other-hand allows
to control the object storage while still properly instantiating
an object,keeping the behavior inside the C++ language
specification.

Change-Id: If96afcb2c9dbea8fb6815d74a2181ca9ed04903a
Signed-off-by: Pavithra Barithaya <pavithrabarithaya07@gmail.com>

show more ...

libpldmresponder: Improving Logs (lg2)

This commit corrects the severity level of logs and also formats the
message string, fixing the ill-defined message string of the logs as
mentioned in the anti

libpldmresponder: Improving Logs (lg2)

This commit corrects the severity level of logs and also formats the
message string, fixing the ill-defined message string of the logs as
mentioned in the anti-pattern document [1]. Additionally, based on the
requirement this commit adds more debug information to logs.

[1]: https://github.com/openbmc/docs/blob/master/anti-patterns.md#ill-defined-data-structuring-in-lg2-message-strings

Change-Id: I7dc5c308a8cd76573995e07d01d1a6037bca31ba
Signed-off-by: Riya Dixit <riyadixitagra@gmail.com>

show more ...

Use std::map.contains as per latest c++

This commit replaces occurrences of 'find' with
'contains' to access elements in a std::map
according to the latest C++ standard (since C++20).

However, cont

Use std::map.contains as per latest c++

This commit replaces occurrences of 'find' with
'contains' to access elements in a std::map
according to the latest C++ standard (since C++20).

However, contains() is not suitable in all situations
as in the case where we want to use the element contained
in the map using contains(), then it would do 2 searches
instead of 1 in the case where we use find() which fetches
the element from the map also.

Here are some relevant links to C++ documentation and
resources:

[1]: https://en.cppreference.com/w/cpp/container/map/find
[2]: https://en.cppreference.com/w/cpp/container/map/contains
[3]: https://wg21.link/N4861

Signed-off-by: Sagar Srinivas <sagar.srinivas@ibm.com>
Change-Id: If589e52026417c1c14a6a946e48826b749034e9a

show more ...

Remove iostream references

With the adoption of LG2 we do not need iostream
prints to the journal. The library was referred but
never used in these cases.

Signed-off-by: Sagar Srinivas <sagar.srini

Remove iostream references

With the adoption of LG2 we do not need iostream
prints to the journal. The library was referred but
never used in these cases.

Signed-off-by: Sagar Srinivas <sagar.srinivas@ibm.com>
Change-Id: I11d3f00284e4f16b63cddb8da2fed14d59672ba1

show more ...

pldm: Use modern libpldm OEM header paths

Fixed with:

```
sed -Ei 's/libpldm\/([a-z_]+)_oem_ibm\.h/libpldm\/oem\/ibm\/\1.h/' $(git ls-files)
sed -Ei 's/libpldm\/file_io.h/libpldm\/oem\/ibm\/file_io

pldm: Use modern libpldm OEM header paths

Fixed with:

```
sed -Ei 's/libpldm\/([a-z_]+)_oem_ibm\.h/libpldm\/oem\/ibm\/\1.h/' $(git ls-files)
sed -Ei 's/libpldm\/file_io.h/libpldm\/oem\/ibm\/file_io.h/' $(git ls-files)
sed -Ei 's/libpldm\/host.h/libpldm\/oem\/ibm\/host.h/' $(git ls-files)
```

Change-Id: Idbe61dcc53754d7e6005b34ae21bec8ab6ed45da
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

show more ...

Reorganize the setEventReceiver code

This commit is to re-organise the code to make the
setEventReceiver optional when GetTID gets called.

Currently, it is being called on every GetTID command.
Thi

Reorganize the setEventReceiver code

This commit is to re-organise the code to make the
setEventReceiver optional when GetTID gets called.

Currently, it is being called on every GetTID command.
This is and OEM behaviour, which was implemented at -
https://gerrit.openbmc.org/c/openbmc/pldm/+/41779/36

Also, setEventReceiver is a command defined in the platform
Spec, so rightfully placing it under the platform handler.

Signed-off-by: Sagar Srinivas <sagar.srinivas@ibm.com>
Change-Id: Ib60e9d46a8eaf4806c5ec2e9575f4e219bc80eab

show more ...

pldm: Convert to using libpldm transport APIs

A significant amount of logic can be removed by exploiting the new
transport APIs provided by libpldm. Switch the pldm repository over to
use these by i

pldm: Convert to using libpldm transport APIs

A significant amount of logic can be removed by exploiting the new
transport APIs provided by libpldm. Switch the pldm repository over to
use these by introducing an RAII wrapper for the APIs. The current
stance is to continue using the legacy mctp-demux transport
implementation, but we also provide a build option to switch to the
AF_MCTP transport.

We don't currently have the infrastructure in place to get the correct
TIDs, so to keep everything working as before use the EID as the TID in
the EID-to-TID mapping.

Change-Id: I366f079082b102cfc0e90db0f62208581eb8693e
Signed-off-by: Rashmica Gupta <rashmica@linux.ibm.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>

show more ...

pldm: Include config.h via compiler argument

This removes any ambiguity about which config.h is being included.
Subprojects such as libpldm and phosphor-logging also generate config.h
files, and the

pldm: Include config.h via compiler argument

This removes any ambiguity about which config.h is being included.
Subprojects such as libpldm and phosphor-logging also generate config.h
files, and these are exposed in the include path.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Change-Id: I3e0ccd6339f088380ffa29d41167b07aefc7dd16

show more ...

pldmd: Migrate instance ID allocation to pldm::InstanceIdDb

This removes use of `pldm::dbus_api::Requester` from around the
code-base. This makes progress towards removing the DBus API entirely
once

pldmd: Migrate instance ID allocation to pldm::InstanceIdDb

This removes use of `pldm::dbus_api::Requester` from around the
code-base. This makes progress towards removing the DBus API entirely
once all its consumers are converted to the libpldm instance ID APIs.

There was never a good reason for the code using the class to have
knowledge that it was related to DBus anyway, so this is, in-effect, a
double clean up improving separation of concerns.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Change-Id: I2d9397cae1b3c8c251c32e36ca520aad9c9b8cf6

show more ...

clang-format: copy latest and re-format

clang-format-16 has some backwards incompatible changes that require
additional settings for best compatibility and re-running the formatter.
Copy the latest

clang-format: copy latest and re-format

clang-format-16 has some backwards incompatible changes that require
additional settings for best compatibility and re-running the formatter.
Copy the latest .clang-format from the docs repository and reformat the
repository.

Change-Id: I61b093f75011417cc9c7acf9605200f4fa429bac
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

PLDM: Implementing Phosphor-Logging/LG2 logging

This commit adds changes in PLDM for implementing
structured LG2 logging, thereby moving away from
std::cout/cerr practice of logging which are
output

PLDM: Implementing Phosphor-Logging/LG2 logging

This commit adds changes in PLDM for implementing
structured LG2 logging, thereby moving away from
std::cout/cerr practice of logging which are
output streams and not logging mechanism.

PLDM now can make use of lg2 features like accurate
CODE LINE Number and CODE_FUNCTION Name and better
detailing in json object values which can be used in
log tracking.

More detailed logging change:
https://gist.github.com/riyadixitagra/c251685c1ba84248181891f7bc282395

Tested:
Ran a power off, on, cycle, and reset-reload.

Change-Id: I0485035f15f278c3fd172f0581b053c1c37f3a5b
Signed-off-by: Riya Dixit <riyadixitagra@gmail.com>

show more ...

Populate correct terminusId

Hardcoded terminus id 0 is used at multiple places in the current code.
Made changes to populate correct terminus id instead of hardcoded one.

Change-Id: I63cedcb38fb2d9

Populate correct terminusId

Hardcoded terminus id 0 is used at multiple places in the current code.
Made changes to populate correct terminus id instead of hardcoded one.

Change-Id: I63cedcb38fb2d993e2e4a2b45846c19531d55839
Signed-off-by: ArchanaKakani <archana.kakani@ibm.com>

show more ...

libpldm: Correct reference to libpldm header files

When relying on header files from external libraries, #include<> should
be used instead of #include "" to avoid ambiguity.

Tested: Built pldm succ

libpldm: Correct reference to libpldm header files

When relying on header files from external libraries, #include<> should
be used instead of #include "" to avoid ambiguity.

Tested: Built pldm successfully after enabling ibm-oem

Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ia1997de7e0f61564055bbd837f4e24c8f14e55a5

show more ...

libpldm: Migrate to subproject

Organize files in libpldm to make it a subproject

In the current state, libpldm is not readily consumable
as a subproject.This commit does all the necessary re-organi

libpldm: Migrate to subproject

Organize files in libpldm to make it a subproject

In the current state, libpldm is not readily consumable
as a subproject.This commit does all the necessary re-organisation
of the source code to make it work as a subproject.

There are no .c/.h files changes in this commit, only meson
changes and re-organising the code structure.

Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I20a71c0c972b1fd81fb359d604433618799102c6

show more ...

libpldm : Fix ver32 encoding declaration

This commit would attempt to fix the wrongly captured
ver32 structure declaration in libpldm & impacted test
cases.

Resolves : https://github.com/openbmc/pl

libpldm : Fix ver32 encoding declaration

This commit would attempt to fix the wrongly captured
ver32 structure declaration in libpldm & impacted test
cases.

Resolves : https://github.com/openbmc/pldm/issues/27

Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I9dccd4377bb1ef0e7738527ff154fd75f6277f39

show more ...

Fix a bad error traces

There are couple of places where we are trying to print
the 8 bit value, and it std::cout cannot display those directly,
we need to typecast it to an integer.

Signed-off-by:

Fix a bad error traces

There are couple of places where we are trying to print
the 8 bit value, and it std::cout cannot display those directly,
we need to typecast it to an integer.

Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Ibaa212de28e125fd6904c0a7b1f5b5f8c0609d51

show more ...

oem_ibm: Disable Watchdog Timer

The Host watchdog timer is started when the BMC is
powered on with a predefined timer interval. BMC
monitors if the Host boots without failures and
Host is supposed t

oem_ibm: Disable Watchdog Timer

The Host watchdog timer is started when the BMC is
powered on with a predefined timer interval. BMC
monitors if the Host boots without failures and
Host is supposed to ping the BMC(through
PlatformEventMessages) within the watchdog timer
interval expiration and BMC resets the watchdog
timer on receiving pings from Host and in case
the Host fails to ping the BMC within the timer
interval expiration, then BMC will trigger a host
dump.

This commit is to disable the watchdog timer after
host poweron completion, which will be followed by
surveillance(monitoring of BMC by Host).

Signed-off-by: Sagar Srinivas <sagar.srinivas@ibm.com>
Change-Id: I734e6e98f6c2936aebd04c0b56bdfebba4cfd40b

show more ...

PLDM: implement surveillance between Host and bmc

This commit is to implement surveillance between host
and bmc, wherein host monitors if bmc is up and
running through constant pings(by sending Plat

PLDM: implement surveillance between Host and bmc

This commit is to implement surveillance between host
and bmc, wherein host monitors if bmc is up and
running through constant pings(by sending Platform
EventMessages) sent from host to BMC. And if BMC
fails to respond to the pings, then BMC will be
reset using the KCS interface.

1. Host->BMC - GetTID
2. BMC->Host - Respond to GetTID, SetEventReceiver
3. Host->BMC - Respond to SetEventReceiver
4. BMC->Host - Send PlatformEventMessage after the
elapsed time interval(specified with
SetEventReceiver command)
4. Host->BMC - If BMC fails to send respond to host
within specified interval, Host resets BMC via
the KCS interface

Tested with PLDMTOOL:
SetEventReceiver command:
root@rain127bmc:/tmp# ./pldmtool base GetTID -m 8
Received Msg
08 01 81 00 02
Sending Msg
01 00 02 00 01
{
"Response": 1
}

platformEventMessage command(which will be received
by host):
root@rain118bmc:/tmp# ./pldmtool raw -d 0x80 0x02
0x0A 0x01 0x01 0x06 0x01 0x01
Request Message:
08 01 80 02 0a 01 01 06 01 01
Received Msg
08 01 80 02 0a 01 01 06 01 01
eventClass Checking
Sending Msg
00 02 0a 00 00
Response Message:
08 01 00 02 0a 00 00
Received Msg
08 01 00 02 0a 00 00

Signed-off-by: Sagar Srinivas <sagar.srinivas@ibm.com>
Change-Id: Iac90b2233a873a54504ffa649d324d30525b7ce3

show more ...

libpldmresponder & pldmtool : Expand support for GetPLDMCommands

Update newly available pldm commands for bios and platform.
Resolves : https://github.com/openbmc/pldm/issues/9

Tested on latest BMC

libpldmresponder & pldmtool : Expand support for GetPLDMCommands

Update newly available pldm commands for bios and platform.
Resolves : https://github.com/openbmc/pldm/issues/9

Tested on latest BMC environment.

$ pldmtool base GetPLDMCommands -t 3
[
{
"PLDM Command Code": 1,
"PLDM Command": "GetBIOSTable"
},
{
"PLDM Command Code": 2,
"PLDM Command": "SetBIOSTable"
},
{
"PLDM Command Code": 7,
"PLDM Command": "SetBIOSAttributeCurrentValue"
},
{
"PLDM Command Code": 8,
"PLDM Command": "GetBIOSAttributeCurrentValueByHandle"
},
{
"PLDM Command Code": 12,
"PLDM Command": "GetDateTime"
},
{
"PLDM Command Code": 13,
"PLDM Command": "SetDateTime"
}
]

$ pldmtool base GetPLDMCommands -t 2
[
{
"PLDM Command Code": 4,
"PLDM Command": "SetEventReceiver"
},
{
"PLDM Command Code": 10,
"PLDM Command": "PlatformEventMessage"
},
{
"PLDM Command Code": 17,
"PLDM Command": "GetSensorReading"
},
{
"PLDM Command Code": 33,
"PLDM Command": "GetStateSensorReadings"
},
{
"PLDM Command Code": 49,
"PLDM Command": "SetNumericEffecterValue"
},
{
"PLDM Command Code": 50,
"PLDM Command": "GetNumericEffecterValue"
},
{
"PLDM Command Code": 57,
"PLDM Command": "SetStateEffecterStates"
},
{
"PLDM Command Code": 81,
"PLDM Command": "GetPDR"
}
]

Signed-off-by: Sridevi Ramesh <sridevra@in.ibm.com>
Change-Id: Id7fbc449d6eb90541e46f98cf0aa2bf5d6f48316

show more ...

pldmtool: Implement GetFRURecordByOption

Implement GetFRURecordByOption

Tested:

$pldmtool fru GetFRURecordByOption -i 0 -r 0 -f 0
...
FRU Record Set Identifier: 1
FRU Record Type: 1(General)
Numbe

pldmtool: Implement GetFRURecordByOption

Implement GetFRURecordByOption

Tested:

$pldmtool fru GetFRURecordByOption -i 0 -r 0 -f 0
...
FRU Record Set Identifier: 1
FRU Record Type: 1(General)
Number of FRU fields: 5
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 3(Part Number)
FRU Field Length: 7
FRU Field Value: 02CY415
FRU Field Type: 4(Serial Number)
FRU Field Length: 12
FRU Field Value: YA1934319126
FRU Field Type: 5(Manufacturer)
FRU Field Length: 3
FRU Field Value: IBM
FRU Field Type: 8(Name)
FRU Field Length: 16
FRU Field Value: PROCESSOR MODULE
FRU Field Type: 10(Version)
FRU Field Length: 2
FRU Field Value: 22
FRU Record Set Identifier: 2
FRU Record Type: 1(General)
Number of FRU fields: 4
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 2(Model)
FRU Field Length: 20
FRU Field Value: M393A2K43BB1-CTD
FRU Field Type: 4(Serial Number)
FRU Field Length: 10
FRU Field Value: 0x367f4d92
FRU Field Type: 5(Manufacturer)
FRU Field Length: 19
FRU Field Value: Samsung Electronics
FRU Field Type: 8(Name)
FRU Field Length: 32
FRU Field Value: DDR4-2666 16GiB 64-bit ECC RDIMM
FRU Record Set Identifier: 3
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 12
FRU Field Value: powersupply0
FRU Record Set Identifier: 4
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 12
FRU Field Value: powersupply1

$pldmtool fru GetFRURecordByOption -i 0 -r 0 -f 8
FRU Record Set Identifier: 1
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 16
FRU Field Value: PROCESSOR MODULE
FRU Record Set Identifier: 2
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 32
FRU Field Value: DDR4-2666 16GiB 64-bit ECC RDIMM
FRU Record Set Identifier: 3
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 12
FRU Field Value: powersupply0
FRU Record Set Identifier: 4
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 8(Name)
FRU Field Length: 12
FRU Field Value: powersupply1

$pldmtool fru GetFRURecordByOption -i 0 -r 0 -f 4
FRU Record Set Identifier: 1
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 4(Serial Number)
FRU Field Length: 12
FRU Field Value: YA1934319126
FRU Record Set Identifier: 2
FRU Record Type: 1(General)
Number of FRU fields: 1
Encoding Type for FRU fields: 1(ASCII)
FRU Field Type: 4(Serial Number)
FRU Field Length: 10
FRU Field Value: 0x367f4d92
FRU Record Set Identifier: 3
FRU Record Type: 1(General)
Number of FRU fields: 0
Encoding Type for FRU fields: 1(ASCII)
FRU Record Set Identifier: 4
FRU Record Type: 1(General)
Number of FRU fields: 0
Encoding Type for FRU fields: 1(ASCII)

Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Ia4bf6f938061dad69ab243704cfa9ac8da5fc80e

show more ...

clang-format: update to latest from docs repo

Since `Cpp11` is an alias for `Latest` and we should tend towards using the
latest C++ standard, update the C++ standard to Latest.

https://github.com/

clang-format: update to latest from docs repo

Since `Cpp11` is an alias for `Latest` and we should tend towards using the
latest C++ standard, update the C++ standard to Latest.

https://github.com/llvm/llvm-project/commit/e5032567903de19962333c4bf7d2edceaf4f9824#diff-b49a097415dff2837d9626d422c58ba8R82
https://github.com/openbmc/docs/blob/master/style/cpp/.clang-format

Also, other OpenBMC repos are doing the same.

Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I449e88bb4e1e262060110e1a8f3e8db3ddfc74cf

show more ...

Enable 'oem-ibm' in pldmtool for base commands.

pldmtool base GetPLDMTypes
Supported types: 0(base) 2(platform) 3(bios) 4(fru) 63(oem-ibm)

pldmtool base GetPLDMCommands -t 63
upported Commands : 1(

Enable 'oem-ibm' in pldmtool for base commands.

pldmtool base GetPLDMTypes
Supported types: 0(base) 2(platform) 3(bios) 4(fru) 63(oem-ibm)

pldmtool base GetPLDMCommands -t 63
upported Commands : 1(GetFileTable) 4(ReadFile) 5(WriteFile) 6(ReadFileInToMemory) 7(WriteFileFromMemory) 8(ReadFileByTypeIntoMemory) 9(WriteFileByTypeFromMemory) 10(NewFileAvailable) 11(ReadFileByType) 12(WriteFileByType) 13(FileAck) 240(GetAlertStatus)

pldmtool base GetPLDMVersion -t 63
Type 63(oem-ibm): 1.0.0

pldmtool oem-ibm --help
oem type command
Usage: ./pldmtool oem-ibm [OPTIONS] SUBCOMMAND

Options:
-h,--help Print this help message and exit

Subcommands:
GetAlertStatus get alert status descriptor

Signed-off-by: Sridevi Ramesh <sridevra@in.ibm.com>
Change-Id: I4937e56dcf11eb0c0a2a272a3439821f9eb60b5f

show more ...

Updated supported PDLM commands list

The associative container "capabilities" was updated to reflect the
currently implemented PLDM types and respective commands. The return
value in the test code w

Updated supported PDLM commands list

The associative container "capabilities" was updated to reflect the
currently implemented PLDM types and respective commands. The return
value in the test code was updated.

Add set-bios-attribute-current-value.

Tested:
Tested on fp5280g2:

root@fp5280g2:~# pldmtool base GetPLDMCommands --type bios
Encode request successfully
Request Message:
.....
Parsed Response Msg:
Supported Commands : 1(GetBIOSTable) 7(SetBIOSAttributeCurrentValue) 8(GetBIOSAttributeCurrentValueByHandle) 12(GetDateTime) 13(SetDateTime)

Signed-off-by: Xiaochao Ma <maxiaochao@inspur.com>
Change-Id: Ic15efb589586d980258ed10d470f168e7c8cc6a6

show more ...

Enable FRU support in libpldmresponder/base.cpp

pldmtool base GetPLDMtypes
Encode request successfully
Request Message:
08 01 80 00 04
Success in creating the socket : RC = 3
Success in connecting t

Enable FRU support in libpldmresponder/base.cpp

pldmtool base GetPLDMtypes
Encode request successfully
Request Message:
08 01 80 00 04
Success in creating the socket : RC = 3
Success in connecting to socket : RC = 0
Success in sending message type as pldm to mctp : RC = 0
Received Msg
Buffer Data: 08 01 80 00 04
Sending Msg
Buffer Data: 00 00 04 00 1d 00 00 00 00 00 00 00
Received Msg
Buffer Data: 08 01 00 00 04 00 1d 00 00 00 00 00 00 00
Write to socket successful : RC = 5
Total length:5
Loopback response message:
08 01 80 00 04
On first recv(),response == request : RC = 0
Total length: 14
Shutdown Socket successful : RC = 0
Response Message:
08 01 00 00 04 00 1d 00 00 00 00 00 00 00
Supported types: 0(base) 2(platform) 3(bios) 4(fru)

pldmtool raw -d 0x80 0x00 0x05 0x04 0xF1 0XF0 0XF0 0X00
Encode request successfully
Request Message:
08 01 80 00 05 04 f1 f0 f0 00
Success in creating the socket : RC = 3
Success in connecting to socket : RC = 0
Success in sending message type as pldm to mctp : RC = 0
Received Msg
Buffer Data: 08 01 80 00 05 04 f1 f0 f0 00
Sending Msg
Buffer Data: 00 00 05 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Received Msg
Buffer Data: 08 01 00 00 05 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Write to socket successful : RC = 10
Total length:10
Loopback response message:
08 01 80 00 05 04 f1 f0 f0 00
On first recv(),response == request : RC = 0
Total length: 38
Shutdown Socket successful : RC = 0
Response Message:
08 01 00 00 05 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Sridevi Ramesh <sridevra@in.ibm.com>
Change-Id: I969a6f283cedc4029c756ba4c685955dd1c619d3

show more ...

Update the PLDM version for Platform Spec

The Platform Monitoring and Control specification has the latest
revision 1.2.0. The GetPLDMversion command is updated to reflect this.

Change-Id: Ibb9d5f1

Update the PLDM version for Platform Spec

The Platform Monitoring and Control specification has the latest
revision 1.2.0. The GetPLDMversion command is updated to reflect this.

Change-Id: Ibb9d5f1b7c54d82c3bedaad89bd2b5896f8788c2
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>

show more ...