pseq: Update STATUS_VOUT checks in config files

Update the phosphor-power-sequencer JSON configuration files for the
following systems:
* Rainier
* BlueRidge
* Everest
* Fuji

Add STATUS_VOUT checki

pseq: Update STATUS_VOUT checks in config files

Update the phosphor-power-sequencer JSON configuration files for the
following systems:
* Rainier
* BlueRidge
* Everest
* Fuji

Add STATUS_VOUT checking for voltage rails connected to digital monitors
(DMONs) on the UCD90320 power sequencer. Checking STATUS_VOUT is more
accurate than other methods in some scenarios.

Also remove STATUS_VOUT and READ_VOUT checking for the PSU rails on
Everest and Fuji. PMBus information is not available for the PSU rail
due to the way it is configured in the power sequencer device.

Change-Id: If5e630b2c17e0a34e240b1df512a9662a5370289
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>

show more ...

pseq: Create Everest JSON cfg file in new format

Create an Everest JSON configuration file in the new format for the
phosphor-power-sequencer application.

The new JSON file format is documented in

pseq: Create Everest JSON cfg file in new format

Create an Everest JSON configuration file in the new format for the
phosphor-power-sequencer application.

The new JSON file format is documented in the
phosphor-power-sequencer/docs/config_file directory.

When all of the new C++ code and JSON config files are in place, the old
C++ code and JSON config files will be deleted.

Change-Id: Id255ba3b6d99baf605aafa938e41dba239488dd4
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>

show more ...