Merge tag 'v6.6.35' into dev-6.6

This is the 6.6.35 stable release

rtla/auto-analysis: Replace \t with spaces

commit a40e5e4dd0207485dee75e2b8e860d5853bcc5f7 upstream.

When copying timerlat auto-analysis from a terminal to some web pages or
chats, the \t are being

rtla/auto-analysis: Replace \t with spaces

commit a40e5e4dd0207485dee75e2b8e860d5853bcc5f7 upstream.

When copying timerlat auto-analysis from a terminal to some web pages or
chats, the \t are being replaced with a single ' ' or ' ', breaking
the output.

For example:
## CPU 3 hit stop tracing, analyzing it ##
IRQ handler delay: 1.30 us (0.11 %)
IRQ latency: 1.90 us
Timerlat IRQ duration: 3.00 us (0.24 %)
Blocking thread: 1223.16 us (99.00 %)
insync:4048 1223.16 us
IRQ interference 4.93 us (0.40 %)
local_timer:236 4.93 us
------------------------------------------------------------------------
Thread latency: 1235.47 us (100%)

Replace \t with spaces to avoid this problem.

Link: https://lkml.kernel.org/r/ec7ed2b2809c22ab0dfc8eb7c805ab9cddc4254a.1713968967.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux

Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.

Timerlat

Merge tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux

Pull rtla fixes from Daniel Bristot de Oliveira:
"rtla (Real-Time Linux Analysis) tool fixes.

Timerlat auto-analysis:

- Timerlat is reporting thread interference time without thread noise
events occurrence. It was caused because the thread interference
variable was not reset after the analysis of a timerlat activation
that did not hit the threshold.

- The IRQ handler delay is estimated from the delta of the IRQ
latency reported by timerlat, and the timestamp from IRQ handler
start event. If the delta is near-zero, the drift from the external
clock and the trace event and/or the overhead can cause the value
to be negative. If the value is negative, print a zero-delay.

- IRQ handlers happening after the timerlat thread event but before
the stop tracing were being reported as IRQ that happened before
the *current* IRQ occurrence. Ignore Previous IRQ noise in this
condition because they are valid only for the *next* timerlat
activation.

Timerlat user-space:

- Timerlat is stopping all user-space thread if a CPU becomes
offline. Do not stop the entire tool if a CPU is/become offline,
but only the thread of the unavailable CPU. Stop the tool only, if
all threads leave because the CPUs become/are offline.

man-pages:

- Fix command line example in timerlat hist man page"

* tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux:
rtla: fix a example in rtla-timerlat-hist.rst
rtla/timerlat: Do not stop user-space if a cpu is offline
rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample
rtla/timerlat_aa: Fix negative IRQ delay
rtla/timerlat_aa: Zero thread sum after every sample analysis

show more ...

rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample

timerlat auto-analysis takes note of all IRQs, before or after the
execution of the timerlat thread.

Because we ca

rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample

timerlat auto-analysis takes note of all IRQs, before or after the
execution of the timerlat thread.

Because we cannot go backward in the trace (we will fix it when
moving to trace-cmd lib?), timerlat aa take note of the last IRQ
execution in the waiting for the IRQ state, and then print it
if it is executed after the expected timer IRQ starting time.

After the thread sample, the timerlat starts recording the next IRQs as
"previous" irq for the next occurrence.

However, if an IRQ happens after the thread measurement but before the
tracing stops, it is classified as a previous IRQ. That is not
wrong, as it can be "previous" for the subsequent activation. What is
wrong is considering it as a potential source for the last activation.

Ignore the IRQ interference that happens after the IRQ starting time for
now. A future improvement for timerlat can be either keeping a list of
previous IRQ execution or using the trace-cmd library. Still, it requires
further investigation - it is a new feature.

Link: https://lore.kernel.org/lkml/a44a3f5c801dcc697bacf7325b65d4a5b0460537.1691162043.git.bristot@kernel.org

Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

show more ...

rtla/timerlat_aa: Fix negative IRQ delay

When estimating the IRQ timer delay, we are dealing with two different
clock sources: the external clock source that timerlat uses as a reference
and the clo

rtla/timerlat_aa: Fix negative IRQ delay

When estimating the IRQ timer delay, we are dealing with two different
clock sources: the external clock source that timerlat uses as a reference
and the clock used by the tracer. There are also two moments: the time
reading the clock and the timer in which the event is placed in the
buffer (the trace event timestamp).

If the processor is slow or there is some hardware noise, the difference
between the timestamp and the external clock, read can be longer than the
IRQ handler delay, resulting in a negative time.

If so, set IRQ to start delay as 0. In the end, it is less near-zero and relevant
then the noise.

Link: https://lore.kernel.org/lkml/a066fb667c7136d86dcddb3c7ccd72587db3e7c7.1691162043.git.bristot@kernel.org

Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

show more ...

rtla/timerlat_aa: Zero thread sum after every sample analysis

The thread thread_thread_sum accounts for thread interference
during a single activation. It was not being zeroed, so it was
accumulatin

rtla/timerlat_aa: Zero thread sum after every sample analysis

The thread thread_thread_sum accounts for thread interference
during a single activation. It was not being zeroed, so it was
accumulating thread interference over all activations.

It was not that visible when timerlat was the highest priority.

Link: https://lore.kernel.org/lkml/97bff55b0141f2d01b47d9450a5672fde147b89a.1691162043.git.bristot@kernel.org

Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tooling updates from Steven Rostedt:

- Add cgroup support for rtla via the -C option

Merge tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tooling updates from Steven Rostedt:

- Add cgroup support for rtla via the -C option

- Add --house-keeping option that tells rtla where to place the
housekeeping threads

- Have rtla/timerlat have its own tracing instance instead of using the
top level tracing instance that is the default for other tracing
users to use

- Add auto analysis to timerlat_hist

- Have rtla start the tracers after creating the instances

- Reduce rtla hwnoise down to 75% from 100% as it runs with preemption
disabled and can cause system instability at 100%

- Add support to run timerlat_top and timerlat_hist threads in
user-space instead of just using the kernel tasks

- Some minor clean ups and documentation changes

* tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: Add tools/rtla timerlat -u option documentation
rtla/timerlat_hist: Add timerlat user-space support
rtla/timerlat_top: Add timerlat user-space support
rtla/hwnoise: Reduce runtime to 75%
rtla: Start the tracers after creating all instances
rtla/timerlat_hist: Add auto-analysis support
rtla/timerlat: Give timerlat auto analysis its own instance
rtla: Automatically move rtla to a house-keeping cpu
rtla: Change monitored_cpus from char * to cpu_set_t
rtla: Add --house-keeping option
rtla: Add -C cgroup support

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

rtla/timerlat: Give timerlat auto analysis its own instance

Currently, the auto-analysis is attached to the timerlat top instance.
The idea was to avoid creating another instance just for that, so o

rtla/timerlat: Give timerlat auto analysis its own instance

Currently, the auto-analysis is attached to the timerlat top instance.
The idea was to avoid creating another instance just for that, so one
instance could be reused.

The drawback is that, by doing so, the auto-analysis run for the entire
session, consuming CPU time. On my 24 box CPUs for timerlat with a 100
us period consumed 50 % with auto analysis, but only 16 % without.

By creating an instance for auto-analysis, we can keep the processing
stopped until a stop tracing condition is hit. Once it happens,
timerlat auto-analysis can use its own trace instance to parse only
the end of the trace.

By doing so, auto-analysis stop consuming cpu time when it is not
needed.

If the --aa-only is passed, the timerlat top instance is reused for
auto analysis.

Link: https://lkml.kernel.org/r/346b7168c1bae552a415715ec6d23c129a43bdb7.1686066600.git.bristot@kernel.org

Cc: William White <chwhite@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tools updates from Steven Rostedt:

- Add auto-analysis only option to rtla/timerlat

Merge tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tools updates from Steven Rostedt:

- Add auto-analysis only option to rtla/timerlat

Add an --aa-only option to the tooling to perform only the auto
analysis and not to parse and format the data.

- Other minor fixes and clean ups

* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Fix "Previous IRQ" auto analysis' line
rtla/timerlat: Add auto-analysis only option
rv: Remove redundant assignment to variable retval
rv: Fix addition on an uninitialized variable 'run'
rtla: Add .gitignore file

show more ...