Merge branch 'main' into zstd-linus

Merge branch 'next' into for-linus

Prepare input updates for 6.2 merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'main' into zstd-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly repre

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master

show more ...

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for al

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

show more ...

Merge branch 'tc-testing-qdisc'

Zhengchao Shao says:

====================
net: add tc-testing qdisc test cases

For this patchset, test cases of the qdisc modules are added to the
tc-testing test s

Merge branch 'tc-testing-qdisc'

Zhengchao Shao says:

====================
net: add tc-testing qdisc test cases

For this patchset, test cases of the qdisc modules are added to the
tc-testing test suite.

Last, thanks to Victor for testing and suggestion.

After a test case is added locally, the test result is as follows:

./tdc.py -c atm
ok 1 7628 - Create ATM with default setting
ok 2 390a - Delete ATM with valid handle
ok 3 32a0 - Show ATM class
ok 4 6310 - Dump ATM stats

./tdc.py -c choke
ok 1 8937 - Create CHOKE with default setting
ok 2 48c0 - Create CHOKE with min packet setting
ok 3 38c1 - Create CHOKE with max packet setting
ok 4 234a - Create CHOKE with ecn setting
ok 5 4380 - Create CHOKE with burst setting
ok 6 48c7 - Delete CHOKE with valid handle
ok 7 4398 - Replace CHOKE with min setting
ok 8 0301 - Change CHOKE with limit setting

./tdc.py -c codel
ok 1 983a - Create CODEL with default setting
ok 2 38aa - Create CODEL with limit packet setting
ok 3 9178 - Create CODEL with target setting
ok 4 78d1 - Create CODEL with interval setting
ok 5 238a - Create CODEL with ecn setting
ok 6 939c - Create CODEL with ce_threshold setting
ok 7 8380 - Delete CODEL with valid handle
ok 8 289c - Replace CODEL with limit setting
ok 9 0648 - Change CODEL with limit setting

./tdc.py -c etf
ok 1 34ba - Create ETF with default setting
ok 2 438f - Create ETF with delta nanos setting
ok 3 9041 - Create ETF with deadline_mode setting
ok 4 9a0c - Create ETF with skip_sock_check setting
ok 5 2093 - Delete ETF with valid handle

./tdc.py -c fq
ok 1 983b - Create FQ with default setting
ok 2 38a1 - Create FQ with limit packet setting
ok 3 0a18 - Create FQ with flow_limit setting
ok 4 2390 - Create FQ with quantum setting
ok 5 845b - Create FQ with initial_quantum setting
ok 6 9398 - Create FQ with maxrate setting
ok 7 342c - Create FQ with nopacing setting
ok 8 6391 - Create FQ with refill_delay setting
ok 9 238b - Create FQ with low_rate_threshold setting
ok 10 7582 - Create FQ with orphan_mask setting
ok 11 4894 - Create FQ with timer_slack setting
ok 12 324c - Create FQ with ce_threshold setting
ok 13 424a - Create FQ with horizon time setting
ok 14 89e1 - Create FQ with horizon_cap setting
ok 15 32e1 - Delete FQ with valid handle
ok 16 49b0 - Replace FQ with limit setting
ok 17 9478 - Change FQ with limit setting

./tdc.py -c gred
ok 1 8942 - Create GRED with default setting
ok 2 5783 - Create GRED with grio setting
ok 3 8a09 - Create GRED with limit setting
ok 4 48cb - Create GRED with ecn setting
ok 5 763a - Change GRED setting
ok 6 8309 - Show GRED class

./tdc.py -c hhf
ok 1 4812 - Create HHF with default setting
ok 2 8a92 - Create HHF with limit setting
ok 3 3491 - Create HHF with quantum setting
ok 4 ba04 - Create HHF with reset_timeout setting
ok 5 4238 - Create HHF with admit_bytes setting
ok 6 839f - Create HHF with evict_timeout setting
ok 7 a044 - Create HHF with non_hh_weight setting
ok 8 32f9 - Change HHF with limit setting
ok 9 385e - Show HHF class

./tdc.py -c pfifo_fast
ok 1 900c - Create pfifo_fast with default setting
ok 2 7470 - Dump pfifo_fast stats
ok 3 b974 - Replace pfifo_fast with different handle
ok 4 3240 - Delete pfifo_fast with valid handle
ok 5 4385 - Delete pfifo_fast with invalid handle

./tdc.py -c plug
ok 1 3289 - Create PLUG with default setting
ok 2 0917 - Create PLUG with block setting
ok 3 483b - Create PLUG with release setting
ok 4 4995 - Create PLUG with release_indefinite setting
ok 5 389c - Create PLUG with limit setting
ok 6 384a - Delete PLUG with valid handle
ok 7 439a - Replace PLUG with limit setting
ok 8 9831 - Change PLUG with limit setting

./tdc.py -c sfb
ok 1 3294 - Create SFB with default setting
ok 2 430a - Create SFB with rehash setting
ok 3 3410 - Create SFB with db setting
ok 4 49a0 - Create SFB with limit setting
ok 5 1241 - Create SFB with max setting
ok 6 3249 - Create SFB with target setting
ok 7 30a9 - Create SFB with increment setting
ok 8 239a - Create SFB with decrement setting
ok 9 9301 - Create SFB with penalty_rate setting
ok 10 2a01 - Create SFB with penalty_burst setting
ok 11 3209 - Change SFB with rehash setting
ok 12 5447 - Show SFB class

./tdc.py -c sfq
ok 1 7482 - Create SFQ with default setting
ok 2 c186 - Create SFQ with limit setting
ok 3 ae23 - Create SFQ with perturb setting
ok 4 a430 - Create SFQ with quantum setting
ok 5 4539 - Create SFQ with divisor setting
ok 6 b089 - Create SFQ with flows setting
ok 7 99a0 - Create SFQ with depth setting
ok 8 7389 - Create SFQ with headdrop setting
ok 9 6472 - Create SFQ with redflowlimit setting
ok 10 8929 - Show SFQ class

./tdc.py -c skbprio
ok 1 283e - Create skbprio with default setting
ok 2 c086 - Create skbprio with limit setting
ok 3 6733 - Change skbprio with limit setting
ok 4 2958 - Show skbprio class

./tdc.py -c taprio
ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
ok 2 9462 - Add taprio Qdisc with multiple sched-entry
ok 3 8d92 - Add taprio Qdisc with txtime-delay
ok 4 d092 - Delete taprio Qdisc with valid handle
ok 5 8471 - Show taprio class
ok 6 0a85 - Add taprio Qdisc to single-queue device

./tdc.py -c tbf
ok 1 6430 - Create TBF with default setting
ok 2 0518 - Create TBF with mtu setting
ok 3 320a - Create TBF with peakrate setting
ok 4 239b - Create TBF with latency setting
ok 5 c975 - Create TBF with overhead setting
ok 6 948c - Create TBF with linklayer setting
ok 7 3549 - Replace TBF with mtu
ok 8 f948 - Change TBF with latency time
ok 9 2348 - Show TBF class

./tdc.py -c teql
ok 1 84a0 - Create TEQL with default setting
ok 2 7734 - Create TEQL with multiple device
ok 3 34a9 - Delete TEQL with valid handle
ok 4 6289 - Show TEQL stats

---
v3: add config
v2: modify subject prefix
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests/tc-testing: add selftests for codel qdisc

Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78

selftests/tc-testing: add selftests for codel qdisc

Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78d1: Create CODEL with interval setting
Test 238a: Create CODEL with ecn setting
Test 939c: Create CODEL with ce_threshold setting
Test 8380: Delete CODEL with valid handle
Test 289c: Replace CODEL with limit setting
Test 0648: Change CODEL with limit setting

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...