Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side a

Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side as the upstream stable
branches cherry-picked a small number of changes out of a much large
series, which has already been backported.

show more ...

selftests/rseq: Fix handling of glibc without rseq support

commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream.

When porting librseq commit:

commit c7b45750fa85 ("Adapt to glibc __rseq_size f

selftests/rseq: Fix handling of glibc without rseq support

commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream.

When porting librseq commit:

commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")

from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():

rseq_size = get_rseq_kernel_feature_size();

which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.

In a following librseq commit

commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")

to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.

This combines the changes from the following librseq git commits:

commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")

Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

selftests/rseq: Fix mm_cid test failure

commit a0cc649353bb726d4aa0db60dce467432197b746 upstream.

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:

glibc commit 2e456ccf0

selftests/rseq: Fix mm_cid test failure

commit a0cc649353bb726d4aa0db60dce467432197b746 upstream.

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:

glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")

Without this fix, rseq selftests for mm_cid fail:

./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable

Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Moln

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

- Improve the scalability of the CFS bandwidth unthrottling logi

Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.

- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.

- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.

- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.

- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.

- Fix the rescheduling logic in prio_changed_dl().

- Micro-optimize cpufreq and sched-util methods.

- Micro-optimize ttwu_runnable()

- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().

- Update the RSEQ code & self-tests

- Constify various scheduler methods

- Remove unused methods

- Refine __init tags

- Documentation updates

- Misc other cleanups, fixes

* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...

show more ...

selftests/rseq: x86: Template memory ordering and percpu access mode

Introduce a rseq-x86-bits.h template header which is internally included
to generate the static inline functions covering:

- rel

selftests/rseq: x86: Template memory ordering and percpu access mode

Introduce a rseq-x86-bits.h template header which is internally included
to generate the static inline functions covering:

- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.

This introduces changes to the rseq.h selftests API which require to
update the rseq selftest programs. Similar API/templating changes need
to be done for other architectures.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-12-mathieu.desnoyers@efficios.com

show more ...

selftests/rseq: Implement rseq mm_cid field support

Add support for the mm_cid field (per-memory-map concurrency ID) of
struct rseq to rseq selftests.

Signed-off-by: Mathieu Desnoyers <mathieu.desn

selftests/rseq: Implement rseq mm_cid field support

Add support for the mm_cid field (per-memory-map concurrency ID) of
struct rseq to rseq selftests.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-11-mathieu.desnoyers@efficios.com

show more ...

selftests/rseq: Implement rseq numa node id field selftest

Test the NUMA node id extension rseq field. Compare it against the value
returned by the getcpu(2) system call while pinned on a specific c

selftests/rseq: Implement rseq numa node id field selftest

Test the NUMA node id extension rseq field. Compare it against the value
returned by the getcpu(2) system call while pinned on a specific core.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-7-mathieu.desnoyers@efficios.com

show more ...

selftests/rseq: Use ELF auxiliary vector for extensible rseq

Use the ELF auxiliary vector AT_RSEQ_FEATURE_SIZE to detect the RSEQ
features supported by the kernel.

Signed-off-by: Mathieu Desnoyers

selftests/rseq: Use ELF auxiliary vector for extensible rseq

Use the ELF auxiliary vector AT_RSEQ_FEATURE_SIZE to detect the RSEQ
features supported by the kernel.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-6-mathieu.desnoyers@efficios.com

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>