Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commit

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).

The main changes are:

1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann

2) Support new insns from cpu v4 from Yonghong Song

3) Non-atomically allocate freelist during prefill from YiFei Zhu

4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu

5) Add tracepoint to xdp attaching failure from Leon Hwang

6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================

Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'bpf-xdp-add-tracepoint-to-xdp-attaching-failure'

Leon Hwang says:

====================
bpf, xdp: Add tracepoint to xdp attaching failure

This series introduces a new tracepoint in bp

Merge branch 'bpf-xdp-add-tracepoint-to-xdp-attaching-failure'

Leon Hwang says:

====================
bpf, xdp: Add tracepoint to xdp attaching failure

This series introduces a new tracepoint in bpf_xdp_link_attach(). By
this tracepoint, error message will be captured when error happens in
dev_xdp_attach(), e.g. invalid attaching flags.

v4 -> v5:
* Initialise the extack variable.
* Fix code style issue of variable declaration lines.

v3 -> v4:
* Fix selftest-crashed issue.
====================

Link: https://lore.kernel.org/r/20230801142621.7925-1-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Add testcase for xdp attaching failure tracepoint

Add a test case for the tracepoint of xdp attaching failure by bpf
tracepoint when attach XDP to a device with invalid flags option.

selftests/bpf: Add testcase for xdp attaching failure tracepoint

Add a test case for the tracepoint of xdp attaching failure by bpf
tracepoint when attach XDP to a device with invalid flags option.

The bpf tracepoint retrieves error message from the tracepoint, and
then put the error message to a perf buffer. The testing code receives
error message from perf buffer, and then ASSERT "Invalid XDP flags for
BPF link attachment".

Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230801142621.7925-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. In

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances

- Reduce compound page head access for zero-copy data transfers

- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible

- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance

- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking

- Add lockless accesses annotation to sk_err[_soft]

- Optimize again the skb struct layout

- Extends the skb drop reasons to make it usable by multiple
subsystems

- Better const qualifier awareness for socket casts

BPF:

- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses

- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward

- Add more precise memory usage reporting for all BPF map types

- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params

- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton

- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities

- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc

- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps

- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps

- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree

- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them

- Add ARM32 USDT support to libbpf

- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations

Protocols:

- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address

- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf

- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures

- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers

- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction

- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore

- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support

Netfilter:

- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged

- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support

- The iptables 32bit compat interface isn't compiled in by default
anymore

- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used

- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device

Driver API:

- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time

- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them

- Allow the page_pool to directly recycle the pages from safely
localized NAPI

- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization

- Add YNL support for user headers and struct attrs

- Add partial YNL specification for devlink

- Add partial YNL specification for ethtool

- Add tc-mqprio and tc-taprio support for preemptible traffic classes

- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device

- Add basic LED support for switch/phy

- Add NAPI documentation, stop relaying on external links

- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space

- Add transceiver support and improve the error messages for CAN-FD
controllers

New hardware / drivers:

- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY

- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997

- Can:
- STMicroelectronics bxcan stm32f429

Drivers:

- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP

- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame

- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates

- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E

- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware

- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets

- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)

- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility

- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-03-06

We've added 85 non-merge commits

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-03-06

We've added 85 non-merge commits during the last 13 day(s) which contain
a total of 131 files changed, 7102 insertions(+), 1792 deletions(-).

The main changes are:

1) Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses, from Joanne Koong.

2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities,
from Andrii Nakryiko.

3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc,
from Alexei Starovoitov.

4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps, from Kumar Kartikeya Dwivedi.

5) Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them,
from Eduard Zingerman.

6) Make uprobe attachment Android APK aware by supporting attachment
to functions inside ELF objects contained in APKs via function names,
from Daniel Müller.

7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper
to start the timer with absolute expiration value instead of relative
one, from Tero Kristo.

8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id,
from Tejun Heo.

9) Extend libbpf to support users manually attaching kprobes/uprobes
in the legacy/perf/link mode, from Menglong Dong.

10) Implement workarounds in the mips BPF JIT for DADDI/R4000,
from Jiaxun Yang.

11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT,
from Hengqi Chen.

12) Extend BPF instruction set doc with describing the encoding of BPF
instructions in terms of how bytes are stored under big/little endian,
from Jose E. Marchesi.

13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui.

14) Fix bpf_xdp_query() backwards compatibility on old kernels,
from Yonghong Song.

15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS,
from Florent Revest.

16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache,
from Hou Tao.

17) Fix BPF verifier's check_subprogs to not unnecessarily mark
a subprogram with has_tail_call, from Ilya Leoshkevich.

18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode
selftests/bpf: Split test_attach_probe into multi subtests
libbpf: Add support to set kprobe/uprobe attach mode
tools/resolve_btfids: Add /libsubcmd to .gitignore
bpf: add support for fixed-size memory pointer returns for kfuncs
bpf: generalize dynptr_get_spi to be usable for iters
bpf: mark PTR_TO_MEM as non-null register type
bpf: move kfunc_call_arg_meta higher in the file
bpf: ensure that r0 is marked scratched after any function call
bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper
bpf: clean up visit_insn()'s instruction processing
selftests/bpf: adjust log_fixup's buffer size for proper truncation
bpf: honor env->test_state_freq flag in is_state_visited()
selftests/bpf: enhance align selftest's expected log matching
bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER}
bpf: improve stack slot state printing
selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access()
selftests/bpf: test if pointer type is tracked for BPF_ST_MEM
bpf: allow ctx writes using BPF_ST_MEM instruction
bpf: Use separate RCU callbacks for freeing selem
...
====================

Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'Add skb + xdp dynptrs'

Joanne Koong says:

====================

This patchset is the 2nd in the dynptr series. The 1st can be found here [0].

This patchset adds skb and xdp type dynp

Merge branch 'Add skb + xdp dynptrs'

Joanne Koong says:

====================

This patchset is the 2nd in the dynptr series. The 1st can be found here [0].

This patchset adds skb and xdp type dynptrs, which have two main benefits for
packet parsing:
* allowing operations on sizes that are not statically known at
compile-time (eg variable-sized accesses).
* more ergonomic and less brittle iteration through data (eg does not need
manual if checking for being within bounds of data_end)

When comparing the differences in runtime for packet parsing without dynptrs
vs. with dynptrs, there is no noticeable difference. Patch 9 contains more
details as well as examples of how to use skb and xdp dynptrs.

[0] https://lore.kernel.org/bpf/20220523210712.3641569-1-joannelkoong@gmail.com/
---
Changelog:

v12 = https://lore.kernel.org/bpf/20230226085120.3907863-1-joannelkoong@gmail.com/
v12 -> v13:
* Fix missing { } for case statement

v11 = https://lore.kernel.org/bpf/20230222060747.2562549-1-joannelkoong@gmail.com/
v11 -> v12:
* Change constant mem size checking to use "__szk" kfunc annotation
for slices
* Use autoloading for success selftests

v10 = https://lore.kernel.org/bpf/20230216225524.1192789-1-joannelkoong@gmail.com/
v10 -> v11:
* Reject bpf_dynptr_slice_rdwr() for non-writable progs at load time
instead of runtime
* Add additional patch (__uninit kfunc annotation)
* Expand on documentation
* Add bpf_dynptr_write() calls for persisting writes in tests

v9 = https://lore.kernel.org/bpf/20230127191703.3864860-1-joannelkoong@gmail.com/
v9 -> v10:
* Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr interface
* Add some more tests
* Split up patchset into more parts to make it easier to review

v8 = https://lore.kernel.org/bpf/20230126233439.3739120-1-joannelkoong@gmail.com/
v8 -> v9:
* Fix dynptr_get_type() to check non-stack dynptrs

v7 = https://lore.kernel.org/bpf/20221021011510.1890852-1-joannelkoong@gmail.com/
v7 -> v8:
* Change helpers to kfuncs
* Add 2 new patches (1/5 and 2/5)

v6 = https://lore.kernel.org/bpf/20220907183129.745846-1-joannelkoong@gmail.com/
v6 -> v7
* Change bpf_dynptr_data() to return read-only data slices if the skb prog
is read-only (Martin)
* Add test "skb_invalid_write" to test that writes to rd-only data slices
are rejected

v5 = https://lore.kernel.org/bpf/20220831183224.3754305-1-joannelkoong@gmail.com/
v5 -> v6
* Address kernel test robot errors by static inlining

v4 = https://lore.kernel.org/bpf/20220822235649.2218031-1-joannelkoong@gmail.com/
v4 -> v5
* Address kernel test robot errors for configs w/out CONFIG_NET set
* For data slices, return PTR_TO_MEM instead of PTR_TO_PACKET (Kumar)
* Split selftests into subtests (Andrii)
* Remove insn patching. Use rdonly and rdwr protos for dynptr skb
construction (Andrii)
* bpf_dynptr_data() returns NULL for rd-only dynptrs. There will be a
separate bpf_dynptr_data_rdonly() added later (Andrii and Kumar)

v3 = https://lore.kernel.org/bpf/20220822193442.657638-1-joannelkoong@gmail.com/
v3 -> v4
* Forgot to commit --amend the kernel test robot error fixups

v2 = https://lore.kernel.org/bpf/20220811230501.2632393-1-joannelkoong@gmail.com/
v2 -> v3
* Fix kernel test robot build test errors

v1 = https://lore.kernel.org/bpf/20220726184706.954822-1-joannelkoong@gmail.com/
v1 -> v2
* Return data slices to rd-only skb dynptrs (Martin)
* bpf_dynptr_write allows writes to frags for skb dynptrs, but always
invalidates associated data slices (Martin)
* Use switch casing instead of ifs (Andrii)
* Use 0xFD for experimental kind number in the selftest (Zvi)
* Put selftest conversions w/ dynptrs into new files (Alexei)
* Add new selftest "test_cls_redirect_dynptr.c"
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: tests for using dynptrs to parse skb and xdp buffers

Test skb and xdp dynptr functionality in the following ways:

1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_red

selftests/bpf: tests for using dynptrs to parse skb and xdp buffers

Test skb and xdp dynptr functionality in the following ways:

1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse
skb data

* This is a great example of how dynptrs can be used to simplify a
lot of the parsing logic for non-statically known values.

When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t cls_redirect"):
original version: 0.092 sec
with dynptrs: 0.078 sec

2) progs/test_xdp_dynptr.c
* Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data

When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t xdp_attach"):
original version: 0.118 sec
with dynptrs: 0.094 sec

3) progs/test_l4lb_noinline_dynptr.c
* Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse
skb data

When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t l4lb_all"):
original version: 0.062 sec
with dynptrs: 0.081 sec

For number of processed verifier instructions:
original version: 6268 insns
with dynptrs: 2588 insns

4) progs/test_parse_tcp_hdr_opt_dynptr.c
* Add sample code for parsing tcp hdr opt lookup using dynptrs.
This logic is lifted from a real-world use case of packet parsing
in katran [0], a layer 4 load balancer. The original version
"progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included
here as well, for comparison.

When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t parse_tcp_hdr_opt"):
original version: 0.031 sec
with dynptrs: 0.045 sec

5) progs/dynptr_success.c
* Add test case "test_skb_readonly" for testing attempts at writes
on a prog type with read-only skb ctx.
* Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't
supported for skb progs.

6) progs/dynptr_fail.c
* Add test cases "skb_invalid_data_slice{1,2,3,4}" and
"xdp_invalid_data_slice{1,2}" for testing that helpers that modify the
underlying packet buffer automatically invalidate the associated
data slice.
* Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing
that prog types that do not support bpf_dynptr_from_skb/xdp don't
have access to the API.
* Add test case "dynptr_slice_var_len{1,2}" for testing that
variable-sized len can't be passed in to bpf_dynptr_slice
* Add test case "skb_invalid_slice_write" for testing that writes to a
read-only data slice are rejected by the verifier.
* Add test case "data_slice_out_of_bounds_skb" for testing that
writes to an area outside the slice are rejected.
* Add test case "invalid_slice_rdwr_rdonly" for testing that prog
types that don't allow writes to packet data don't accept any calls
to bpf_dynptr_slice_rdwr.

[0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.h

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230301154953.641654-11-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...