Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge branch 'for-5.8' into for-linus

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.
3. Remove scheduler locking restriction
4. RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and RCU Tasks Rude. (This branch is on top of #3 due
to overlap of changed code.)
5. RCU CPU stall warning updates.
6. Torture-test updates.

show more ...

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setti

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setting the resolution on the EFI framebuffer
- simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays"

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'topic/nhlt' into for-next

Merge NHLT init cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.

show more ...

Merge branch 'fixes-v5.7' into fixes

Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next-queued

Backmerging in order to pull "topic/phy-compliance".

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge v5.7-rc1 into drm-misc-fixes

Start the new drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.

3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.

4) Add TTL decrement action to openvswitch, from Matteo Croce.

5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.

6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.

7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.

8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.

9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.

11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.

12) Support bcmgenet on ACPI, from Jeremy Linton.

13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.

14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.

16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.

17) Offload FIFO qdisc in mlxsw, from Petr Machata.

18) Support UDP sockets in sockmap, from Lorenz Bauer.

19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.

20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.

21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.

22) Add support for hw offload of MACSEC, from Antoine Tenart.

23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.

24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.

25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/bpf: Fix nanosleep for real this time

Amazingly, some libc implementations don't call __NR_nanosleep syscall from
their nanosleep() APIs. Hammer it down with explicit syscall() call and ne

selftests/bpf: Fix nanosleep for real this time

Amazingly, some libc implementations don't call __NR_nanosleep syscall from
their nanosleep() APIs. Hammer it down with explicit syscall() call and never
get back to it again. Also simplify code for timespec initialization.

I verified that nanosleep is called w/ printk and in exactly same Linux image
that is used in Travis CI. So it should both sleep and call correct syscall.

v1->v2:
- math is too hard, fix usec -> nsec convertion (Martin);
- test_vmlinux has explicit nanosleep() call, convert that one as well.

Fixes: 4e1fd25d19e8 ("selftests/bpf: Fix usleep() implementation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314002743.3782677-1-andriin@fb.com

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-03-13

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-03-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).

The main changes are:

1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.

2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.

3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.

4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:

bpftool prog profile id 337 duration 3 cycles instructions llc_misses

4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)

5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.

6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.

7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.

8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.

9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'bpf-core-fixes'

Andrii Nakryiko says:

====================
This patch set fixes bug in CO-RE relocation candidate finding logic, which
currently allows matching against forward declar

Merge branch 'bpf-core-fixes'

Andrii Nakryiko says:

====================
This patch set fixes bug in CO-RE relocation candidate finding logic, which
currently allows matching against forward declarations, functions, and other
named types, even though it makes no sense to even attempt. As part of
verifying the fix, add test using vmlinux.h with preserve_access_index
attribute and utilizing struct pt_regs heavily to trace nanosleep syscall
using 5 different types of tracing BPF programs.

This test also demonstrated problems using struct pt_regs in syscall
tracepoints and required a new set of macro, which were added in patch #3
into bpf_tracing.h.

Patch #1 fixes annoying issue with selftest failure messages being out of
sync.

v1->v2:
- drop unused handle__probed() function (Martin).
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

show more ...

selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls

Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 diff

selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls

Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 different types of programs:
- tracepoint;
- raw tracepoint;
- raw tracepoint w/ direct memory reads (tp_btf);
- kprobe;
- fentry.

These programs are realistic variants of real-life tracing programs,
excercising vmlinux.h's usage with tracing applications.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-5-andriin@fb.com

show more ...