Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL

Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.

Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.

For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.

For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.

Summary:

- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update

- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.

- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.

- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)

- Fix region reconfiguration vs CXL decoder ordering rules"

* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit k

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit kernel mode NEON in softirq context
resulted in some issues regarding en/disabling of sofirqs from asm code,
and this made it clear that it would be better to handle more of it from
C code.

Given that we already have infrastructure that associates undefined
instruction exceptions with handler code based on value/mask pairs, we
can easily move the dispatch of VFP and NEON instructions to C code once
we reimplement the actual VFP support routine (which reasons about how
to deal with the exception and whether any emulation is needed) in C
code first.

With those out of the way, we can drop the partial decoding logic in asm
that reasons about which ISA is being used by user space, as the
remaining cases are all 32-bit ARM only. This leaves a FPE specific
routine with some iWMMXT logic that is easily duplicated in C as well,
allowing us to move the FPE asm code into the FPE asm source file, and
out of the shared entry code.

show more ...

Merge branch 'for-next' into for-linus

Pull the 6.5-devel branch for upstreaming.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow th

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue

- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...

- Add some missing interrupt to the STM32 irqchip

- A bunch of warning squashing triggered by W=1 builds

Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org

show more ...

Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl

Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work ar

Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl

Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work around register enumeration and setup helpers.

show more ...

Merge branch 'for-6.5/cxl-type-2' into for-6.5/cxl

Pick up the driver cleanups identified in preparation for CXL "type-2"
(accelerator) device support. The major change here from a conflict
generati

Merge branch 'for-6.5/cxl-type-2' into for-6.5/cxl

Pick up the driver cleanups identified in preparation for CXL "type-2"
(accelerator) device support. The major change here from a conflict
generation perspective is the split of 'struct cxl_memdev_state' from
the core 'struct cxl_dev_state'. Since an accelerator may not care about
all the optional features that are standard on a CXL "type-3" (host-only
memory expander) device.

A silent conflict also occurs with the move of the endpoint port to be a
formal property of a 'struct cxl_memdev' rather than drvdata.

show more ...

Revert "cxl/port: Enable the HDM decoder capability for switch ports"

commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")

...was added on the observation of CXL mem

Revert "cxl/port: Enable the HDM decoder capability for switch ports"

commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")

...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.

While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:

"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."

So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.

Cc: <stable@vger.kernel.org>
Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168685882012.3475336.16733084892658264991.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

cxl: Rename 'uport' to 'uport_dev'

For symmetry with the recent rename of ->dport_dev for a 'struct
cxl_dport', add the "_dev" suffix to the ->uport property of a 'struct
cxl_port'. These devices re

cxl: Rename 'uport' to 'uport_dev'

For symmetry with the recent rename of ->dport_dev for a 'struct
cxl_dport', add the "_dev" suffix to the ->uport property of a 'struct
cxl_port'. These devices represent the downstream-port-device and
upstream-port-device respectively in the CXL/PCIe topology.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-6-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability

Prepare cxl_probe_rcrb() for retrieving more than just the component
register block. The RCH AER handling code wants to get back to t

cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability

Prepare cxl_probe_rcrb() for retrieving more than just the component
register block. The RCH AER handling code wants to get back to the AER
capability that happens to be MMIO mapped rather then configuration
cycles.

Move RCRB specific downstream port data, like the RCRB base and the
AER capability offset, into its own data structure ('struct
cxl_rcrb_info') for cxl_probe_rcrb() to fill. Extend 'struct
cxl_dport' to include a 'struct cxl_rcrb_info' attribute.

This centralizes all RCRB scanning in one routine.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-4-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

cxl/acpi: Probe RCRB later during RCH downstream port creation

The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
imp

cxl/acpi: Probe RCRB later during RCH downstream port creation

The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
implementation comes with drawbacks: During ACPI table scan there is
already MMIO access including mapping and unmapping, but only ACPI
data should be collected here. The collected data must be transferred
through a couple of interfaces until it is finally consumed when
creating the dport. This causes complex data structures and function
interfaces. Additionally, RCRB parsing will be extended to also
extract AER data, it would be much easier do this at a later point
during port and dport creation when the data structures are available
to hold that data.

To simplify all that, probe the RCRB at a later point during RCH
downstream port creation. Change ACPI table parser to only extract the
base address of either the component registers or the RCRB. Parse and
extract the RCRB in devm_cxl_add_rch_dport().

This is in preparation to centralize all RCRB scanning.

Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-2-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20230622205523.85375-3-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Rem

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.c

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

show more ...

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.

Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.

This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc8487b ("MAINTAINERS: re-sort
all entries and fields").

Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...