Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core

Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.

Specifics:

- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)

- Make mode_state_machine in amd-pstate static (Tom Rix)

- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)

- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)

- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)

- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)

- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)

- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)

- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)

- Use of_property_present() for testing DT property presence (Rob
Herring)

- Remove MODULE_LICENSE in non-modules (Nick Alcock)

- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)

- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)

- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)

- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)

- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)

- Drop unnecessary (void *) conversions from the PM core (Li zeming)

- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)

- Use of_property_present() for testing DT property presence (Rob
Herring)

- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)

- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.

- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)

- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)

- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)

- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)

- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"

* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...

show more ...

Merge branches 'pm-core', 'pm-sleep', 'pm-opp' and 'pm-tools'

Merge PM core changes, updates related to system sleep support,
operating performance points (OPP) changes and power management
utilitie

Merge branches 'pm-core', 'pm-sleep', 'pm-opp' and 'pm-tools'

Merge PM core changes, updates related to system sleep support,
operating performance points (OPP) changes and power management
utilities changes for 6.4-rc1:

- Drop unnecessary (void *) conversions from the PM core (Li zeming).

- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).

- Use of_property_present() for testing DT property presence (Rob
Herring).

- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).

- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.

- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).

* pm-core:
PM: core: Remove unnecessary (void *) conversions

* pm-sleep:
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state

* pm-opp:
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
opp: Use of_property_present() for testing DT property presence

* pm-tools:
PM: tools: sleepgraph: Recognize "CPU killed" messages
pm-graph: Update to v5.11

show more ...

pm-graph: Update to v5.11

install_latest_from_github.sh:
- Added a new script which allows users to install the latest pm-graph
from the upstream github repo. This is useful if the kernel source

pm-graph: Update to v5.11

install_latest_from_github.sh:
- Added a new script which allows users to install the latest pm-graph
from the upstream github repo. This is useful if the kernel source
version has issues that have already been fixed in github.

sleepgraph.py:
- Updated all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.

- Added ethtool output to the log for the system's ethernet device id the
ethtool exists. This helps in debugging network issues.

- Made the tool more robustly handle events where mangled dmesg or ftrace
outputs do not include all the requisite data. The tool fails gracefully
instead of creating a garbled timeline.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...