Merge tag 'v6.6.33' into dev-6.6

This is the 6.6.33 stable release

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the e

perf pmu: Count sys and cpuid JSON events separately

[ Upstream commit d9c5f5f94c2d356fdf3503f7fcaf254512bc032d ]

Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.

These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.

Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of

perf pmu: Assume sysfs events are always the same case

[ Upstream commit 7b6dd7a923281a7ccb980a0f768d6926721eb3cc ]

Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.

Consider:

$ perf stat -e inst_retired.any true

The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.

This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.

For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.

Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config numbe

perf tools: Add/use PMU reverse lookup from config to name

[ Upstream commit 67ee8e71daabb8632931b7559e5c8a4b69a427f8 ]

Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.

An example of the output:

$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...

Committer notes:

Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitio

perf pmu: "Compat" supports regular expression matching identifiers

[ Upstream commit 2879ff36f5ed80deec5f9d82a7a4107f2347630e ]

The jevent "Compat" is used for uncore PMU alias or metric definitions.

The same PMU driver has different PMU identifiers due to different
hardware versions and types, but they may have some common PMU event.
Since a Compat value can only match one identifier, when adding the
same event alias to PMUs with different identifiers, each identifier
needs to be defined once, which is not streamlined enough.

So let "Compat" support using regular expression to match identifiers
for uncore PMU alias. For example, if the "Compat" value is set to
"43401|43c01", it would be able to match PMU identifiers such as "43401"
or "43c01", which correspond to CMN600_r0p0 or CMN700_r0p0.

Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, s

perf pmu: Move pmu__find_core_pmu() to pmus.c

[ Upstream commit 3d0f5f456a5786573ba6a3358178c8db580e4b85 ]

pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c

At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.

list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.

Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

perf pmu: Fix a potential memory leak in perf_pmu__lookup()

[ Upstream commit ef5de1613d7d92bdc975e6beb34bb0fa94f34078 ]

The commit in Fixes has reordered some code, but missed an error handling
pa

perf pmu: Fix a potential memory leak in perf_pmu__lookup()

[ Upstream commit ef5de1613d7d92bdc975e6beb34bb0fa94f34078 ]

The commit in Fixes has reordered some code, but missed an error handling
path.

'goto err' now, in order to avoid a memory leak in case of error.

Fixes: f63a536f03a2 ("perf pmu: Merge JSON events with sysfs at load time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/9538b2b634894c33168dfe9d848d4df31fd4d801.1693085544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

perf pmu: Treat the msr pmu as software

[ Upstream commit 24852ef2e2d5c555c2da05baff112ea414b6e0f5 ]

The msr PMU is a software one, meaning msr events may be grouped
with events in a hardware conte

perf pmu: Treat the msr pmu as software

[ Upstream commit 24852ef2e2d5c555c2da05baff112ea414b6e0f5 ]

The msr PMU is a software one, meaning msr events may be grouped
with events in a hardware context. As the msr PMU isn't marked as a
software PMU by perf_pmu__is_software, groups with the msr PMU in
are broken and the msr events placed in a different group. This
may lead to multiplexing errors where a hardware event isn't
counted while the msr event, such as tsc, is. Fix all of this by
marking the msr PMU as software, which agrees with the driver.

Before:
```
$ perf stat -e '{slots,tsc}' -a true
WARNING: events were regrouped to match PMUs

Performance counter stats for 'system wide':

1,750,335 slots
4,243,557 tsc

0.001456717 seconds time elapsed
```

After:
```
$ perf stat -e '{slots,tsc}' -a true
Performance counter stats for 'system wide':

12,526,380 slots
3,415,163 tsc

0.001488360 seconds time elapsed
```

Fixes: 251aa040244a ("perf parse-events: Wildcard most "numeric" events")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240124234200.1510417-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix regression in reading

Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:

# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2

Performance counter stats for 'system wide':

1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/

2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#

- The small llvm.cpp file used to check if the llvm devel files are
present was incorrectly deleted when removing the BPF event in 'perf
trace', put it back as it is also used by tools/bpf/bpftool, that
uses llvm routines to do disassembly of BPF object files.

- Fix use of addr_location__exit() in dlfilter__object_code(), making
sure that it is only used to pair a previous addr_location__init()
call.

* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools build: Fix llvm feature detection, still used by bpftool
perf dlfilter: Add a test for object_code()
perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
perf pmu: Fix perf stat output with correct scale and unit

show more ...

perf pmu: Fix perf stat output with correct scale and unit

The perf_pmu__parse_* functions for the sysfs files of pmu event’s
scale, unit, per-pkg and snapshot were updated in commit 7b723dbb96e8
("

perf pmu: Fix perf stat output with correct scale and unit

The perf_pmu__parse_* functions for the sysfs files of pmu event’s
scale, unit, per-pkg and snapshot were updated in commit 7b723dbb96e8
("perf pmu: Be lazy about loading event info files from sysfs").
However, the paths for these sysfs files were incorrect. This resulted
in perf stat reporting values with wrong scaling and missing units. This
is fixed by correcting the paths for these sysfs files.

Before this fix:

$sudo perf stat -e power/energy-pkg/ -- sleep 2

Performance counter stats for 'system wide':

351,217,188,864 power/energy-pkg/

2.004127961 seconds time elapsed

After this fix:

$sudo perf stat -e power/energy-pkg/ -- sleep 2

Performance counter stats for 'system wide':

80.58 Joules power/energy-pkg/

2.004009749 seconds time elapsed

Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: sandipan.das@amd.com
Cc: james.clark@arm.com
Cc: kan.liang@linux.intel.com
Link: https://lore.kernel.org/r/20230920122349.418673-1-wyes.karny@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
"Build:

- Update header files in the

Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
"Build:

- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.

- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.

- Other minor build fixes.

Misc:

- Fix uninitialized memory access in PMU parsing code

- Fix segfaults on software event"

* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c

show more ...

perf pmu: Ensure all alias variables are initialized

Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_i

perf pmu: Ensure all alias variables are initialized

Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```

Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:

- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.

perf record:

- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.

perf trace:

- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.

The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.

In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.

The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.

Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:

# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0

Performance counter stats for 'sleep 5':

2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle

5.002282128 seconds time elapsed

0.000855000 seconds user
0.000852000 seconds sys

perf annotate:

- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.

Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.

Fix it by explicitly checking the result and aborting instead if it
fails.

We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.

perf report/top:

- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.

- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.

perf report/script:

- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.

- Fix handling of event attributes in pipe mode, i.e. when one uses:

perf record -o - | perf report -i -

When no perf.data files are used.

- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.

perf probe:

- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.

perf tests:

- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.

- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.

- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.

- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:

# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'

- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.

- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).

libperf:

- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).

perf script:

- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.

One can generate the output and upload it to the web interface but
Anup also automated everything:

perf script gecko -F 99 -a sleep 60

- Support syscall name parsing on arm64.

- Print "cgroup" field on the same line as "comm".

perf bench:

- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.

- breakpoints are not available on power9, skip that test.

perf stat:

- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:

TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);

Miscellaneous:

- Improve tool startup time by lazily reading PMU, JSON, sysfs data.

- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.

- Add 'perf test' entries to check the parsing of events
improvements.

- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:

- Free evsel->filter on the destructor.

- Allow tools to register a thread->priv destructor and use it in
'perf trace'.

- Free evsel->priv in 'perf trace'.

- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.

- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.

- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.

- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.

- Add LTO build option.

- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)

- Overhaul the bison files, using constructs such as YYNOMEM.

- Remove unused tokens from the bison .y files.

- Add more comments to various structs.

- A few LoongArch enablement patches.

Vendor events (JSON):

- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:

EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",

- Add AmpereOne metrics (aarch64).

- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.

- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",

- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.

- Update files for the power10 platform"

* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...

show more ...

perf parse-events: Fix propagation of term's no_value when cloning

The no_value field in 'struct parse_events_term' indicates that the val
variable isn't used, the case for an event name.

Cloning w

perf parse-events: Fix propagation of term's no_value when cloning

The no_value field in 'struct parse_events_term' indicates that the val
variable isn't used, the case for an event name.

Cloning wasn't propagating this, making cloned event name terms
appearing to have a constant assinged to them.

Working around the bug would check for a value of 1 assigned to value,
but then this meant a user value of 1 couldn't be differentiated causing
the value to be lost in debug printing and perf list.

The change fixes the cloning and updates the "val.num ==/!= 1" tests to
use no_value instead.

To better check the no_value is set appropriately parameter comments are
added for constant values.

This found that no_value wasn't set correctly in parse_events_multi_pmu_add,
which matters now that no_value is used to indicate an event name.

Fixes: 7a6e91644708d514 ("perf parse-events: Make common term list to strbuf helper")
Fixes: 99e7138eb7897aa0 ("perf tools: Fail on using multiple bits long terms without value")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf pmu: Remove str from perf_pmu_alias

Currently the value is only used in perf list.

Compute the value just when needed to avoid unnecessary overhead.

Recycle the strbuf to avoid memory allocat

perf pmu: Remove str from perf_pmu_alias

Currently the value is only used in perf list.

Compute the value just when needed to avoid unnecessary overhead.

Recycle the strbuf to avoid memory allocation overhead.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf parse-events: Make common term list to strbuf helper

A term list is turned into a string for debug output and for the str
value in the alias.

Add a helper to do this based on existing code, bu

perf parse-events: Make common term list to strbuf helper

A term list is turned into a string for debug output and for the str
value in the alias.

Add a helper to do this based on existing code, but then fix for
situations like events being identified.

Use strbuf to manage the dynamic memory allocation and remove the 256
byte limit.

Use in various places the string of the term list is required.

Before:

$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'inst_retired.any,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'event,period,' that may result in non-fatal errors
inst_retired.any -> cpu/inst_retired.any/
...

After:

$ sudo perf stat -vv -e inst_retired.any true

Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempt to add: cpu/inst_retired.any/
..after resolving event: cpu/event=0xc0,period=0x1e8483/
inst_retired.any -> cpu/event=0xc0,period=0x1e8483/
...

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf pmu: Avoid uninitialized use of alias->str

alias is allocated with malloc allowing uninitialized memory to be
accessed.

The initialization of str was moved late after it could have been
update

perf pmu: Avoid uninitialized use of alias->str

alias is allocated with malloc allowing uninitialized memory to be
accessed.

The initialization of str was moved late after it could have been
updated by a JSON event, however, this create a potential for an
uninitialized use.

Fix this by assigning str to NULL early.

Testing on ARM (Raspberry Pi) showed a memory leak in the same code so
add a zfree.

Fixes: f63a536f03a2f64f ("perf pmu: Merge JSON events with sysfs at load time")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230830000545.1638964-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

perf jevents: Use "default_core" for events with no Unit

The JSON Unit field encodes the name of the PMU to match the events
to. When no name is given it has meant the "cpu" core PMU except for
test

perf jevents: Use "default_core" for events with no Unit

The JSON Unit field encodes the name of the PMU to match the events
to. When no name is given it has meant the "cpu" core PMU except for
tests.

On ARM, Intel hybrid and s390 the core PMU is named differently which
means that using "cpu" for this case causes the events not to get
matched to the PMU.

Introduce a new "default_core" string for this case and in the
pmu__name_match force all core PMUs to match this name.

Fixes: 2e255b4f9f41f137 ("perf jevents: Group events by PMU")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230826062203.1058041-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf pmus: Skip duplicate PMUs and don't print list suffix by default

Add a PMUs scan that ignores duplicates. When there are multiple PMUs
that differ only by suffix, by default just list the first

perf pmus: Skip duplicate PMUs and don't print list suffix by default

Add a PMUs scan that ignores duplicates. When there are multiple PMUs
that differ only by suffix, by default just list the first one and
skip all others. The scan routine checks that the PMU names match but
doesn't enforce that the numbers are consecutive as for some PMUs
there are gaps. If "-v" is passed to "perf list" then list all PMUs.

With the previous change duplicate PMUs are no longer printed but the
suffix of the first is printed. When duplicate PMUs are being skipped
avoid printing the suffix.

Before:

$ perf list
...
uncore_imc_free_running_0/data_read/ [Kernel PMU event]
uncore_imc_free_running_0/data_total/ [Kernel PMU event]
uncore_imc_free_running_0/data_write/ [Kernel PMU event]
uncore_imc_free_running_1/data_read/ [Kernel PMU event]
uncore_imc_free_running_1/data_total/ [Kernel PMU event]
uncore_imc_free_running_1/data_write/ [Kernel PMU event]

After:

$ perf list
...
uncore_imc_free_running/data_read/ [Kernel PMU event]
uncore_imc_free_running/data_total/ [Kernel PMU event]
uncore_imc_free_running/data_write/ [Kernel PMU event]
...
$ perf list -v
uncore_imc_free_running_0/data_read/ [Kernel PMU event]
uncore_imc_free_running_0/data_total/ [Kernel PMU event]
uncore_imc_free_running_0/data_write/ [Kernel PMU event]
uncore_imc_free_running_1/data_read/ [Kernel PMU event]
uncore_imc_free_running_1/data_total/ [Kernel PMU event]
uncore_imc_free_running_1/data_write/ [Kernel PMU event]
...

Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230825135237.921058-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.

show more ...

perf pmu: Make id const and add missing free

The struct pmu id is initialized from pmu_id that is read into allocated
memory from a file, as such it needs free-ing in pmu__delete().

Make the id val

perf pmu: Make id const and add missing free

The struct pmu id is initialized from pmu_id that is read into allocated
memory from a file, as such it needs free-ing in pmu__delete().

Make the id value const so that we can remove casts in tests.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf parse-events: Make term's config const

This avoids casts in tests. Use zfree in a few places to avoid
warnings about a freeing a const pointer.

Signed-off-by: Ian Rogers <irogers@google.com>
C

perf parse-events: Make term's config const

This avoids casts in tests. Use zfree in a few places to avoid
warnings about a freeing a const pointer.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...