Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:

- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.

perf record:

- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.

perf trace:

- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.

The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.

In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.

The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.

Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:

# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0

Performance counter stats for 'sleep 5':

2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle

5.002282128 seconds time elapsed

0.000855000 seconds user
0.000852000 seconds sys

perf annotate:

- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.

Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.

Fix it by explicitly checking the result and aborting instead if it
fails.

We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.

perf report/top:

- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.

- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.

perf report/script:

- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.

- Fix handling of event attributes in pipe mode, i.e. when one uses:

perf record -o - | perf report -i -

When no perf.data files are used.

- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.

perf probe:

- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.

perf tests:

- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.

- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.

- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.

- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:

# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'

- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.

- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).

libperf:

- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).

perf script:

- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.

One can generate the output and upload it to the web interface but
Anup also automated everything:

perf script gecko -F 99 -a sleep 60

- Support syscall name parsing on arm64.

- Print "cgroup" field on the same line as "comm".

perf bench:

- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.

- breakpoints are not available on power9, skip that test.

perf stat:

- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:

TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);

Miscellaneous:

- Improve tool startup time by lazily reading PMU, JSON, sysfs data.

- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.

- Add 'perf test' entries to check the parsing of events
improvements.

- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:

- Free evsel->filter on the destructor.

- Allow tools to register a thread->priv destructor and use it in
'perf trace'.

- Free evsel->priv in 'perf trace'.

- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.

- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.

- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.

- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.

- Add LTO build option.

- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)

- Overhaul the bison files, using constructs such as YYNOMEM.

- Remove unused tokens from the bison .y files.

- Add more comments to various structs.

- A few LoongArch enablement patches.

Vendor events (JSON):

- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:

EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",

- Add AmpereOne metrics (aarch64).

- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.

- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",

- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.

- Update files for the power10 platform"

* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...

show more ...

perf parse-events: Name the two term enums

Name the enums used by 'struct parse_events_term' to
parse_events__term_val_type and parse_events__term_type.

This allows greater compile time error check

perf parse-events: Name the two term enums

Name the enums used by 'struct parse_events_term' to
parse_events__term_val_type and parse_events__term_type.

This allows greater compile time error checking.

Fix -Wswitch related issues by explicitly listing all enum values prior
to default.

Add config_term_name to safely look up a parse_events__term_type name,
bounds checking the array access first.

Add documentation to 'struct parse_events_terms' and reorder to save
space.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

perf parse-events: Remove BPF event support

New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf

perf parse-events: Remove BPF event support

New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF
map") and commit 14e4b9f4289a ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") the BPF event support hasn't been well
maintained and it adds considerable complexity in areas like event
parsing, not least as '/' is a separator for event modifiers as well as
in paths.

This patch removes support in the event parser for BPF events and then
the associated functions are removed. This leads to the removal of whole
source files like bpf-loader.c. Removing support means that augmented
syscalls in perf trace is broken, this will be fixed in a later commit
adding support using BPF skeletons.

The removal of BPF events causes an unused label warning from flex
generated code, so update build to ignore it:

```
util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label]
2704 | find_rule: /* we branch to this label when backing up */
```

Committer notes:

Extracted from a larger patch that was also removing the support for
linking with libllvm and libclang, that were an alternative to using an
external clang execution to compile the .c event source code into BPF
bytecode.

Testing it:

# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Bad event or PMU

Unabled to find PMU or event on a PMU of 'home'

Initial error:
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Cannot find PMU `home'. Missing kernel support?
Run 'perf list' for a list of valid events

Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]

-e, --event <event> event/syscall selector. use 'perf list' to list available events
#

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230810184853.2860737-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

perf tools: Revert enable indices setting syntax for BPF map

This reverts commit e571e029bdbf ("perf tools: Enable indices setting
syntax for BPF map").

The reverted commit added a notion of arrays

perf tools: Revert enable indices setting syntax for BPF map

This reverts commit e571e029bdbf ("perf tools: Enable indices setting
syntax for BPF map").

The reverted commit added a notion of arrays that could be set as
event terms for BPF events. The parsing hasn't worked over multiple
Linux releases. Given the broken nature of the parsing it appears the
code isn't in use, nor could I find a way for it to be used to add a
test.

The original commit contains a test in the commit message,
however, running it yields:
```
$ perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
event syntax error: '..pf_map_3.c/map:channel.value[0,1,2,3...5]=101/'
\___ parser error
Run 'perf list' for a list of valid events

Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]

-e, --event <event> event selector. use 'perf list' to list available events
```

Given the code can't be used this commit reverts and removes it.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230728001212.457900-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull perf tools updates from Namhyung Kim:
"Internal cleanup:

- Refactor PMU d

Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull perf tools updates from Namhyung Kim:
"Internal cleanup:

- Refactor PMU data management to handle hybrid systems in a generic
way.

Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.

- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.

- Add reference count checking for the 'thread' data structure.

- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.

- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.

- Introduce shared_mutex for annotate data to reduce memory
footprint.

- Make filesystem access library functions more thread safe.

Test:

- Organize cpu_map tests into a single suite.

- Add metric value validation test to check if the values are within
correct value ranges.

- Add perf stat stdio output test to check if event and metric names
match.

- Add perf data converter JSON output test.

- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.

- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.

- Add a test for libpfm4 events.

perf script:

- Add 'dsoff' outpuf field to display offset from the DSO.

$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])

- Adjust width for large PID/TID values.

perf report:

- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.

- Allow config terms (like 'name=ABC') with breakpoint events.

$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1

perf annotate:

- Handle x86 instruction suffix like 'l' in 'movl' generally.

- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.

- Support RISC-V binutils lookup using the triplet prefixes.

- Add '<' and '>' key to navigate to prev/next symbols in TUI.

- Fix instruction association and parsing for LoongArch.

perf stat:

- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.

$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8

# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run

Total time: 7.648 [sec]

Performance counter stats for 'system wide':

S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote

7.779171484 seconds time elapsed

- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.

Performance counter stats for 'ls /':

1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring

- Allow --cputype option to have any PMU name (not just hybrid).

- Fix output value not to added when it runs multiple times with -r
option.

perf list:

- Show metricgroup description from JSON file called
metricgroups.json.

- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.

JSON vendor events:

- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.

- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.

- Add AmpereOne core PMU events.

Misc:

- Define man page date correctly.

- Track exception level properly on ARM CoreSight ETM.

- Allow anonymous struct, union or enum when retrieving type names
from DWARF.

- Fix incorrect filename when calling `perf inject --jit`.

- Handle PLT size correctly on LoongArch"

* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

perf parse-events: Avoid string for PE_BP_COLON, PE_BP_SLASH

There's no need to read the string ':' or '/' for PE_BP_COLON or
PE_BP_SLASH and doing so causes parse-events.y to leak memory.

The orig

perf parse-events: Avoid string for PE_BP_COLON, PE_BP_SLASH

There's no need to read the string ':' or '/' for PE_BP_COLON or
PE_BP_SLASH and doing so causes parse-events.y to leak memory.

The original patch has a committer note about not using these tokens
presumably as yacc spotted they were a memory leak because no
%destructor could be run. Remove the unused token workaround as there
is now no value associated with these tokens.

Fixes: f0617f526cb0c482 ("perf parse: Allow config terms with breakpoints")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230613182629.1500317-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

perf parse: Allow config terms with breakpoints

Add config terms to the parsing of breakpoint events. Extend "Test event
parsing" to also cover using a confg term.

This makes breakpoint events cons

perf parse: Allow config terms with breakpoints

Add config terms to the parsing of breakpoint events. Extend "Test event
parsing" to also cover using a confg term.

This makes breakpoint events consistent with other events which already
support config terms.

Example:

$ cat dr_test.c
#include <unistd.h>
#include <stdio.h>

void func0(void)
{
}

int main()
{
printf("func0 %p\n", &func0);
while (1) {
func0();
usleep(100000);
}
return 0;
}
$ gcc -g -O0 -o dr_test dr_test.c
$ ./dr_test &
[2] 19646
func0 0x55feb98dd169
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 0.5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (5 samples) ]
$ perf script
dr_test 19646 5632.956628: 1 breakpoint: 55feb98dd169 func0+0x0 (/home/ahunter/git/work/dr_test)
dr_test 19646 5633.056866: 1 breakpoint: 55feb98dd169 func0+0x0 (/home/ahunter/git/work/dr_test)
dr_test 19646 5633.157084: 1 breakpoint: 55feb98dd169 func0+0x0 (/home/ahunter/git/work/dr_test)
dr_test 19646 5633.257309: 1 breakpoint: 55feb98dd169 func0+0x0 (/home/ahunter/git/work/dr_test)
dr_test 19646 5633.357532: 1 breakpoint: 55feb98dd169 func0+0x0 (/home/ahunter/git/work/dr_test)
$ sudo perf test "Test event parsing"
6: Parse event definition strings :
6.1: Test event parsing : Ok
$ sudo perf test -v "Test event parsing" |& grep mem
running test 8 'mem:0'
running test 9 'mem:0:x'
running test 10 'mem:0:r'
running test 11 'mem:0:w'
running test 19 'mem:0:u'
running test 20 'mem:0:x:k'
running test 21 'mem:0:r:hp'
running test 22 'mem:0:w:up'
running test 26 'mem:0:rw'
running test 27 'mem:0:rw:kp'
running test 42 'mem:0/1'
running test 43 'mem:0/2:w'
running test 44 'mem:0/4:rw:u'
running test 58 'mem:0/name=breakpoint/'
running test 59 'mem:0:x/name=breakpoint/'
running test 60 'mem:0:r/name=breakpoint/'
running test 61 'mem:0:w/name=breakpoint/'
running test 62 'mem:0/name=breakpoint/u'
running test 63 'mem:0:x/name=breakpoint/k'
running test 64 'mem:0:r/name=breakpoint/hp'
running test 65 'mem:0:w/name=breakpoint/up'
running test 66 'mem:0:rw/name=breakpoint/'
running test 67 'mem:0:rw/name=breakpoint/kp'
running test 68 'mem:0/1/name=breakpoint/'
running test 69 'mem:0/2:w/name=breakpoint/'
running test 70 'mem:0/4:rw/name=breakpoint/u'
running test 71 'mem:0/1/name=breakpoint1/,mem:0/4:rw/name=breakpoint2/'

Committer notes:

Folded follow up patch (see 2nd link below) to address warnings about
unused tokens:

perf tools: Suppress bison unused value warnings

Patch "perf tools: Allow config terms with breakpoints" introduced parse
tokens for colons and slashes within breakpoint parsing to prevent mix
up with colons and slashes related to config terms.

The token values are not needed but introduce bison "unused value"
warnings.

Suppress those warnings.

Committer testing:

# cat ~acme/c/mem_breakpoint.c
#include <stdio.h>
#include <unistd.h>

void func1(void) { }
void func2(void) { }
void func3(void) { }
void func4(void) { }
void func5(void) { }

int main()
{
printf("func1 %p\n", &func1);
printf("func2 %p\n", &func2);
printf("func3 %p\n", &func3);
printf("func4 %p\n", &func4);
printf("func5 %p\n", &func5);
while (1) {
func1(); func2(); func3(); func4(); func5();
usleep(100000);
}
return 0;
}

# ~acme/c/mem_breakpoint &
[1] 3186153
func1 0x401136
func2 0x40113d
func3 0x401144
func4 0x40114b
func5 0x401152
#

Trying to watch the first 4 functions for eXecutable access:

# perf record -e mem:0x401136:x/name=breakpoint1/,mem:0x40113d:x/name=breakpoint2/,mem:0x401144:x/name=breakpoint3/,mem:0x40114b:x/name=breakpoint4/ -p 3186153 -- sleep 0.5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data (20 samples) ]
[root@five ~]# perf script
mem_breakpoint 3186153 131612.864793: 1 breakpoint1: 401136 func1+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.864795: 1 breakpoint2: 40113d func2+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.864796: 1 breakpoint3: 401144 func3+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.864797: 1 breakpoint4: 40114b func4+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.964868: 1 breakpoint1: 401136 func1+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.964870: 1 breakpoint2: 40113d func2+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.964871: 1 breakpoint3: 401144 func3+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131612.964872: 1 breakpoint4: 40114b func4+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.064945: 1 breakpoint1: 401136 func1+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.064948: 1 breakpoint2: 40113d func2+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.064948: 1 breakpoint3: 401144 func3+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.064949: 1 breakpoint4: 40114b func4+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.165024: 1 breakpoint1: 401136 func1+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.165026: 1 breakpoint2: 40113d func2+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.165027: 1 breakpoint3: 401144 func3+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.165028: 1 breakpoint4: 40114b func4+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.265103: 1 breakpoint1: 401136 func1+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.265105: 1 breakpoint2: 40113d func2+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.265106: 1 breakpoint3: 401144 func3+0x0 (/var/home/acme/c/mem_breakpoint)
mem_breakpoint 3186153 131613.265107: 1 breakpoint4: 40114b func4+0x0 (/var/home/acme/c/mem_breakpoint)
#

Then all the 5 functions:

# perf record -e mem:0x401136:x/name=breakpoint1/,mem:0x40113d:x/name=breakpoint2/,mem:0x401144:x/name=breakpoint3/,mem:0x40114b:x/name=breakpoint4/,mem:0x401152:x/name=breakpoint5/ -p 3186153 -- sleep 0.5
Error:
The sys_perf_event_open() syscall returned with 28 (No space left on device) for event (breakpoint5).
/bin/dmesg | grep -i perf may provide additional information.

# grep -m1 'model name' /proc/cpuinfo
model name : AMD Ryzen 9 5950X 16-Core Processor
#

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230525082902.25332-2-adrian.hunter@intel.com
Link: https://lore.kernel.org/r/f7228dc9-fe18-a8e3-7d3f-52922e0e1113@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

perf parse-events: Support hardware events as terms

An event like "cpu/instructions/" typically parses due to there being
a sysfs event called instructions. On hybrid recursive parsing means
that th

perf parse-events: Support hardware events as terms

An event like "cpu/instructions/" typically parses due to there being
a sysfs event called instructions. On hybrid recursive parsing means
that the hardware event is encoded in the attribute, with the PMU
being placed in the high bits of the config:

'''
$ perf stat -vv -e 'cpu_core/cycles/' true
...
------------------------------------------------------------
perf_event_attr:
size 136
config 0x400000000
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
'''

Make this behavior the default by adding a new term type and token for
hardware events. The token gathers both the numeric config and the
parsed name, so that if the token appears like "cycles/name=cycles/"
then the token can be handled like a name. The numeric value isn't
sufficient to distinguish say "cpu-cycles" from "cycles".

Extend the parse-events test so that all current non-PMU hardware
parsing tests, also test with the PMU cpu - more than half the change.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-34-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf parse-events: Support PMUs for legacy cache events

Allow a legacy cache event to be both, for example,
"L1-dcache-load-miss" and "cpu/L1-dcache-load-miss/" by introducing a
new legacy cache ter

perf parse-events: Support PMUs for legacy cache events

Allow a legacy cache event to be both, for example,
"L1-dcache-load-miss" and "cpu/L1-dcache-load-miss/" by introducing a
new legacy cache term type.

The term type is processed in config_term_pmu, setting both the type in
perf_event_attr and the config.

The code to determine the config is factored out of
parse_events_add_cache and shared. If the PMU doesn't support legacy
events, currently just core/hybrid PMUs do, then the term is treated
like a PE_NAME term - as before.

If only terms are being parsed, such as for perf_pmu__new_alias, then
the PE_LEGACY_CACHE token is always parsed as PE_NAME.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf parse-events: Avoid scanning PMUs before parsing

The event parser needs to handle two special cases:
1) legacy events like L1-dcache-load-miss. These event names don't
appear in JSON or sysf

perf parse-events: Avoid scanning PMUs before parsing

The event parser needs to handle two special cases:
1) legacy events like L1-dcache-load-miss. These event names don't
appear in JSON or sysfs, and lookup tables are used for the config
value.
2) raw events where 'r0xead' is the same as 'read' unless the PMU has
an event called 'read' in which case the event has priority.

The previous parser to handle these cases would scan all PMUs for
components of event names. These components would then be used to
classify in the lexer whether the token should be part of a legacy
event, a raw event or an event. The grammar would handle legacy event
tokens or recombining the tokens back into a regular event name. The
code wasn't PMU specific and had issues around events like AMD's
branch-brs that would fail to parse as it expects brs to be a suffix
on a legacy event style name:

$ perf stat -e branch-brs true
event syntax error: 'branch-brs'
\___ parser error

This change removes processing all PMUs by using the lexer in the form
of a regular expression matcher. The lexer will return the token for
the longest matched sequence of characters, and in the event of a tie
the first. The legacy events are a fixed number of regular
expressions, and by matching these before a name token its possible to
generate an accurate legacy event token with everything else matching
as a name. Because of the lexer change the handling of hyphens in the
grammar can be removed as hyphens just become a part of the name.

To handle raw events and terms the parser is changed to defer trying
to evaluate whether something is a raw event until the PMU is known in
the grammar. Once the PMU is known, the events of the PMU can be
scanned for the 'read' style problem. A new term type is added for
these raw terms, used to enable deferring the evaluation.

While this change is large, it has stats of:
170 insertions(+), 436 deletions(-)
the bulk of the change is deleting the old approach. It isn't possible
to break apart the code added due to the dependencies on how the parts
of the parsing work.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-19-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...