Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

libbpf: never interpret subprogs in .text as entry programs

[ Upstream commit db089c9158c1d535a36dfc010e5db37fccea2561 ]

Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e.,

libbpf: never interpret subprogs in .text as entry programs

[ Upstream commit db089c9158c1d535a36dfc010e5db37fccea2561 ]

Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).

This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.

Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.

Fixes: bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

libbpf: fix sym_is_subprog() logic for weak global subprogs

[ Upstream commit 4073213488be542f563eb4b2457ab4cbcfc2b738 ]

sym_is_subprog() is incorrectly rejecting relocations against *weak*
global

libbpf: fix sym_is_subprog() logic for weak global subprogs

[ Upstream commit 4073213488be542f563eb4b2457ab4cbcfc2b738 ]

sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.

While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:

libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed

It's clearly not a map relocation, but is treated and reported as such
without this fix.

Fixes: 53eddb5e04ac ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

libbpf: Fix expected_attach_type set handling in program load callback

[ Upstream commit a400d08b3014a4f4e939366bb6fd769b9caff4c9 ]

Referenced commit broke the logic of resetting expected_attach_ty

libbpf: Fix expected_attach_type set handling in program load callback

[ Upstream commit a400d08b3014a4f4e939366bb6fd769b9caff4c9 ]

Referenced commit broke the logic of resetting expected_attach_type to
zero for allowed program types if kernel doesn't yet support such field.
We do need to overwrite and preserve expected_attach_type for
multi-uprobe though, but that can be done explicitly in
libbpf_prepare_prog_load().

Fixes: 5902da6d8a52 ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

libbpf: Add NULL checks to bpf_object__{prev_map,next_map}

[ Upstream commit cedc12c5b57f7efa6dbebfb2b140e8675f5a2616 ]

In the current state, an erroneous call to
bpf_object__find_map_by_name(NULL,

libbpf: Add NULL checks to bpf_object__{prev_map,next_map}

[ Upstream commit cedc12c5b57f7efa6dbebfb2b140e8675f5a2616 ]

In the current state, an erroneous call to
bpf_object__find_map_by_name(NULL, ...) leads to a segmentation
fault through the following call chain:

bpf_object__find_map_by_name(obj = NULL, ...)
-> bpf_object__for_each_map(pos, obj = NULL)
-> bpf_object__next_map((obj = NULL), NULL)
-> return (obj = NULL)->maps

While calling bpf_object__find_map_by_name with obj = NULL is
obviously incorrect, this should not lead to a segmentation
fault but rather be handled gracefully.

As __bpf_map__iter already handles this situation correctly, we
can delegate the check for the regular case there and only add
a check in case the prev or next parameter is NULL.

Signed-off-by: Andreas Ziegler <ziegler.andreas@siemens.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240703083436.505124-1-ziegler.andreas@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.33' into dev-6.6

This is the 6.6.33 stable release

libbpf: Fix error message in attach_kprobe_multi

[ Upstream commit 7c13ef16e87ac2e44d16c0468b1191bceb06f95c ]

We just failed to retrieve pattern, so we need to print spec instead.

Fixes: ddc6b0498

libbpf: Fix error message in attach_kprobe_multi

[ Upstream commit 7c13ef16e87ac2e44d16c0468b1191bceb06f95c ]

We just failed to retrieve pattern, so we need to print spec instead.

Fixes: ddc6b04989eb ("libbpf: Add bpf_program__attach_kprobe_multi_opts function")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502075541.1425761-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

libbpf: Apply map_set_def_max_entries() for inner_maps on creation

[ Upstream commit f04deb90e516e8e48bf8693397529bc942a9e80b ]

This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_M

libbpf: Apply map_set_def_max_entries() for inner_maps on creation

[ Upstream commit f04deb90e516e8e48bf8693397529bc942a9e80b ]

This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().

Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.

Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ]

An issue occurred while reading an ELF file in libbpf.c during fu

libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ]

An issue occurred while reading an ELF file in libbpf.c during fuzzing:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)

scn_data was null at this code(tools/lib/bpf/src/libbpf.c):

if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {

The scn_data is derived from the code above:

scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);

relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;

In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer

Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-08-25

We've added 87 non-merge commits

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-08-25

We've added 87 non-merge commits during the last 8 day(s) which contain
a total of 104 files changed, 3719 insertions(+), 4212 deletions(-).

The main changes are:

1) Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds,
from Jiri Olsa.

2) Add support BPF cpu v4 instructions for arm64 JIT compiler,
from Xu Kuohai.

3) Add support BPF cpu v4 instructions for riscv64 JIT compiler,
from Pu Lehui.

4) Fix LWT BPF xmit hooks wrt their return values where propagating
the result from skb_do_redirect() would trigger a use-after-free,
from Yan Zhai.

5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr
where the map's value kptr type and locally allocated obj type
mismatch, from Yonghong Song.

6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph
root/node which bypassed reg->off == 0 enforcement,
from Kumar Kartikeya Dwivedi.

7) Lift BPF verifier restriction in networking BPF programs to treat
comparison of packet pointers not as a pointer leak,
from Yafang Shao.

8) Remove unmaintained XDP BPF samples as they are maintained
in xdp-tools repository out of tree, from Toke Høiland-Jørgensen.

9) Batch of fixes for the tracing programs from BPF samples in order
to make them more libbpf-aware, from Daniel T. Lee.

10) Fix a libbpf signedness determination bug in the CO-RE relocation
handling logic, from Andrii Nakryiko.

11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up
fixes for bpf_refcount shared ownership implementation,
both from Dave Marchevsky.

12) Add a new bpf_object__unpin() API function to libbpf,
from Daniel Xu.

13) Fix a memory leak in libbpf to also free btf_vmlinux
when the bpf_object gets closed, from Hao Luo.

14) Small error output improvements to test_bpf module, from Helge Deller.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits)
selftests/bpf: Add tests for rbtree API interaction in sleepable progs
bpf: Allow bpf_spin_{lock,unlock} in sleepable progs
bpf: Consider non-owning refs to refcounted nodes RCU protected
bpf: Reenable bpf_refcount_acquire
bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes
bpf: Consider non-owning refs trusted
bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire
selftests/bpf: Enable cpu v4 tests for RV64
riscv, bpf: Support unconditional bswap insn
riscv, bpf: Support signed div/mod insns
riscv, bpf: Support 32-bit offset jmp insn
riscv, bpf: Support sign-extension mov insns
riscv, bpf: Support sign-extension load insns
riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W
samples/bpf: Add note to README about the XDP utilities moved to xdp-tools
samples/bpf: Cleanup .gitignore
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp_redirect* utilities
...
====================

Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

libbpf: Add bpf_object__unpin()

For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().

But no bpf_object__unpin() for bp

libbpf: Add bpf_object__unpin()

For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().

But no bpf_object__unpin() for bpf_object__pin(). Adding the former adds
symmetry to the API.

It's also convenient for cleanup in application code. It's an API I
would've used if it was available for a repro I was writing earlier.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/b2f9d41da4a350281a0b53a804d11b68327e14e5.1692832478.git.dxu@dxuuu.xyz

show more ...

libbpf: Free btf_vmlinux when closing bpf_object

I hit a memory leak when testing bpf_program__set_attach_target().
Basically, set_attach_target() may allocate btf_vmlinux, for example,
when setting

libbpf: Free btf_vmlinux when closing bpf_object

I hit a memory leak when testing bpf_program__set_attach_target().
Basically, set_attach_target() may allocate btf_vmlinux, for example,
when setting attach target for bpf_iter programs. But btf_vmlinux
is freed only in bpf_object_load(), which means if we only open
bpf object but not load it, setting attach target may leak
btf_vmlinux.

So let's free btf_vmlinux in bpf_object__close() anyway.

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230822193840.1509809-1-haoluo@google.com

show more ...

Merge branch 'bpf-add-multi-uprobe-link'

Jiri Olsa says:

====================
bpf: Add multi uprobe link

hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new

Merge branch 'bpf-add-multi-uprobe-link'

Jiri Olsa says:

====================
bpf: Add multi uprobe link

hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new uprobe_multi link.

The current uprobe is attached through the perf event and attaching many
uprobes takes a lot of time because of that.

The main reason is that we need to install perf event for each probed function
and profile shows perf event installation (perf_install_in_context) as culprit.

The new uprobe_multi link just creates raw uprobes and attaches the bpf
program to them without perf event being involved.

In addition to being faster we also save file descriptors. For the current
uprobe attach we use extra perf event fd for each probed function. The new
link just need one fd that covers all the functions we are attaching to.

v7 changes:
- fixed task release on error path and re-org the error
path to be more straightforward [Yonghong]
- re-organized uprobe_prog_run locking to follow general pattern
and removed might_fault check as it's not needed in uprobe/task
context [Yonghong]

There's support for bpftrace [2] and tetragon [1].

Also available at:
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
uprobe_multi

thanks,
jirka

[1] https://github.com/cilium/tetragon/pull/936
[2] https://github.com/iovisor/bpftrace/compare/master...olsajiri:bpftrace:uprobe_multi
[3] https://lore.kernel.org/bpf/20230628115329.248450-1-laoar.shao@gmail.com/
---
====================

Link: https://lore.kernel.org/r/20230809083440.3209381-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Add uprobe multi link support to bpf_program__attach_usdt

Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.

The uprobe_multi support is detected

libbpf: Add uprobe multi link support to bpf_program__attach_usdt

Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.

The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.

If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.

If uprobe_multi support is not detected the old behaviour stays.

Also adding usdt.s program section for sleepable usdt probes.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Add uprobe multi link detection

Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.

libbpf: Add uprobe multi link detection

Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-17-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Add support for u[ret]probe.multi[.s] program sections

Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.

Acked-by: Andrii Nakryiko <and

libbpf: Add support for u[ret]probe.multi[.s] program sections

Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Add bpf_program__attach_uprobe_multi function

Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.

The user can specify uprobes wi

libbpf: Add bpf_program__attach_uprobe_multi function

Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.

The user can specify uprobes with direct arguments:

binary_path/func_pattern/pid

or with struct bpf_uprobe_multi_opts opts argument fields:

const char **syms;
const unsigned long *offsets;
const unsigned long *ref_ctr_offsets;
const __u64 *cookies;

User can specify 2 mutually exclusive set of inputs:

1) use only path/func_pattern/pid arguments

2) use path/pid with allowed combinations of:
syms/offsets/ref_ctr_offsets/cookies/cnt

- syms and offsets are mutually exclusive
- ref_ctr_offsets and cookies are optional

Any other usage results in error.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Add elf_resolve_pattern_offsets function

Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.

The 'pattern' argument allows wildcards

libbpf: Add elf_resolve_pattern_offsets function

Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.

The 'pattern' argument allows wildcards (*?' supported).

Offsets are returned in allocated array together with its
size and needs to be released by the caller.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

libbpf: Move elf_find_func_offset* functions to elf object

Adding new elf object that will contain elf related functions.
There's no functional change.

Suggested-by: Andrii Nakryiko <andrii@kernel.

libbpf: Move elf_find_func_offset* functions to elf object

Adding new elf object that will contain elf related functions.
There's no functional change.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...