Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

ASoC: cs35l56: Load tunings for the correct speaker models

[ Upstream commit 245eeff18d7a37693815250ae15979ce98c3d190 ]

If the "spk-id-gpios" property is present it points to GPIOs whose
value must

ASoC: cs35l56: Load tunings for the correct speaker models

[ Upstream commit 245eeff18d7a37693815250ae15979ce98c3d190 ]

If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.

Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.

The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794ef6 ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.33' into dev-6.6

This is the 6.6.33 stable release

ASoC: cs35l56: Fix to ensure ASP1 registers match cache

[ Upstream commit 72a77d7631c6e392677c0134343cf5edcd3a4572 ]

Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to

ASoC: cs35l56: Fix to ensure ASP1 registers match cache

[ Upstream commit 72a77d7631c6e392677c0134343cf5edcd3a4572 ]

Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.

On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.

CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.

To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.

If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.

Backport note:
This won't apply cleanly to kernels older than v6.6.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: d344873c4cbd ("ALSA: hda: cs35l56: Fix lifetime of cs_dsp instance")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.21' into dev-6.6

This is the 6.6.21 stable release

ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()

commit 4703b014f28bf7a2e56d1da238ee95ef6c5ce76b upstream.

It looks like the "!" character was added accidentally. The
regma

ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()

commit 4703b014f28bf7a2e56d1da238ee95ef6c5ce76b upstream.

It looks like the "!" character was added accidentally. The
regmap_update_bits_check() function is normally going to succeed. This
means the rest of the function is unreachable and we don't handle the
situation where "changed" is true correctly.

Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()

[ Upstream commit eba2eb2495f47690400331c722868902784e59de ]

snd_soc_card_get_kcontrol() must be holding a read lock on
card->cont

ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()

[ Upstream commit eba2eb2495f47690400331c722868902784e59de ]

snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.

Compare with snd_ctl_find_numid().

The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).

There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:

codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().

codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().

fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.

To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.

Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().

Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler

Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used

Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function

I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.

Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd283 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization

[ Upstream commit c14f09f010cc569ae7e2f6ef02374f6bfef9917e ]

Rewrite the handling of ASP1 TX mixer mux initialization to prevent a

ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization

[ Upstream commit c14f09f010cc569ae7e2f6ef02374f6bfef9917e ]

Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().

The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.

The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.

This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision

[ Upstream commit f6c967941c5d6fa526fdd64733a8d86bf2bfab31 ]

Put the silicon revision and secured flag in the wm_adsp fwf_nam

ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision

[ Upstream commit f6c967941c5d6fa526fdd64733a8d86bf2bfab31 ]

Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.

This changes the format of the firmware name string from

cs35l56[s]-rev-misc[-system_name]

to
cs35l56-rev[-s]-misc[-system_name]

No firmware files have been published, so this doesn't cause a
compatibility break.

Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.

Backport note:
This won't apply to kernels older than v6.6.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: Fix for initializing ASP1 mixer registers

[ Upstream commit 07f7d6e7a124d3e4de36771e2a4926d0e31c2258 ]

Defer initializing the state of the ASP1 mixer registers until
the firmware has

ASoC: cs35l56: Fix for initializing ASP1 mixer registers

[ Upstream commit 07f7d6e7a124d3e4de36771e2a4926d0e31c2258 ]

Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.

On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.

CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.

DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.

After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.

Backport note:
This won't apply cleanly to kernels older than v6.6.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: Don't add the same register patch multiple times

[ Upstream commit 07687cd0539f8185b6ba0c0afba8473517116d6a ]

Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that i

ASoC: cs35l56: Don't add the same register patch multiple times

[ Upstream commit 07687cd0539f8185b6ba0c0afba8473517116d6a ]

Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.

The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905b9 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp

[ Upstream commit cd38ccbecdace1469b4e0cfb3ddeec72a3fad226 ]

cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_c

ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp

[ Upstream commit cd38ccbecdace1469b4e0cfb3ddeec72a3fad226 ]

cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_component_remove().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component

[ Upstream commit ae861c466ee57e15a29d97629e1c564e3f714a4f ]

The cs35l56->component pointer is used by the suspend-resume han

ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component

[ Upstream commit ae861c466ee57e15a29d97629e1c564e3f714a4f ]

The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

ASoC: cs35l56: Use PCI SSID as the firmware UID

[ Upstream commit 1a1c3d794ef65ef2978c5e65e1aed3fe6f014e90 ]

If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as

ASoC: cs35l56: Use PCI SSID as the firmware UID

[ Upstream commit 1a1c3d794ef65ef2978c5e65e1aed3fe6f014e90 ]

If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.

On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.

For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:

1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
configured using software nodes.

Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.

Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixe

Merge tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixes and look safe for this late RC.

The majority of changes are for ASoC, especially for wcd938x driver
and Cirrus codec drivers, while there are other random fixes including
usual HD-audio quirks"

* tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ASoC: da7219: Correct the process of setting up Gnd switch in AAD
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx
ASoC: dwc: Fix non-DT instantiation
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
ASoC: rt5650: fix the wrong result of key button
ASoC: cs42l42: Fix missing include of gpio/consumer.h
ASoC: cs42l43: Update values for bias sense
ASoC: dt-bindings: cirrus,cs42l43: Update values for bias sense
ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting
ASoC: pxa: fix a memory leak in probe()
ASoC: cs35l56: Fix illegal use of init_completion()
ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors
ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
ASoC: codecs: wcd938x: fix resource leaks on bind errors
ASoC: codecs: wcd938x: fix unbind tear down order
ASoC: codecs: wcd938x: drop bogus bind error handling
...

show more ...

Merge tag 'asoc-fix-v6.6-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

A fairly large set of fixes here but all driver specific, the bigg

Merge tag 'asoc-fix-v6.6-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.

There is one core helper function added as part of a fix for wsa-macro.

show more ...

ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting

The ASP1 DOUT line must be defaulted to be high-impedance when
it is not actually transmitting data for an active channel.

In non

ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting

The ASP1 DOUT line must be defaulted to be high-impedance when
it is not actually transmitting data for an active channel.

In non-SoundWire modes ASP1 will usually be shared by multiple
amps so each amp must only drive the line during the slot for
an enabled TX channel.

In SoundWire mode a custom firmware can use ASP1 as a secondary
chip-to-chip audio link or as GPIO. It should be defaulted to
high-impedance since by default the purpose of this pin is not
known.

Backport note:
On kernel versions before 6.6 the cs35l56->base.regmap argument
to regmap_set_bits() must be changed to cs35l56->regmap.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://lore.kernel.org/r/20231009153412.30380-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

ASoC: cs35l56: Fix illegal use of init_completion()

Fix cs35l56_patch() to call reinit_completion() to reinitialize
the completion object.

It was incorrectly using init_completion().

Signed-off-by

ASoC: cs35l56: Fix illegal use of init_completion()

Fix cs35l56_patch() to call reinit_completion() to reinitialize
the completion object.

It was incorrectly using init_completion().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://lore.kernel.org/r/20231006164405.253796-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.

All small and mostly tri

Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.

All small and mostly trivial fixes.

- Lots of fixes for the new -Wformat-truncation warnings

- A fix in ALSA rawmidi core regression and UMP handling

- Series of Cirrus codec fixes

- ASoC Intel and Realtek codec fixes

- Usual HD- and USB-audio quirks and AMD ASoC quirks"

* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...

show more ...

Merge tag 'asoc-fix-v6.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

Quite a large collection of fixes, with numbers boosted by multipl

Merge tag 'asoc-fix-v6.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

Quite a large collection of fixes, with numbers boosted by multiple
vendors sending multi-patch serieses. Nothing super major, and also one
device quirk.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: cs35l56: Call pm_runtime_dont_use_autosuspend()

Driver remove() must call pm_runtime_dont_use_autosuspend().

Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove().

ASoC: cs35l56: Call pm_runtime_dont_use_autosuspend()

Driver remove() must call pm_runtime_dont_use_autosuspend().

Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().

THIS WON'T APPLY CLEANLY TO V6.5 AND EARLIER:
We will send a separate backported patch to stable.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908101716.2658582-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including

Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.

Here are some highlights:

ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups

ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110

Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"

* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...

show more ...