Revision tags: v6.6.67, v6.6.66, v6.6.65, v6.6.64, v6.6.63, v6.6.62, v6.6.61, v6.6.60, v6.6.59, v6.6.58, v6.6.57, v6.6.56, v6.6.55, v6.6.54, v6.6.53, v6.6.52, v6.6.51, v6.6.50, v6.6.49, v6.6.48, v6.6.47, v6.6.46, v6.6.45, v6.6.44, v6.6.43, v6.6.42, v6.6.41, v6.6.40, v6.6.39, v6.6.38, v6.6.37, v6.6.36, v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13 |
|
#
4f2c0a4a |
| 13-Dec-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-linus
|
Revision tags: v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4 |
|
#
14e77332 |
| 21-Oct-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-next
|
Revision tags: v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1 |
|
#
5f8f8574 |
| 10-Oct-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.1 merge window.
|
#
edd1533d |
| 05-Oct-2022 |
Benjamin Tissoires <benjamin.tissoires@redhat.com> |
Merge branch 'for-6.1/logitech' into for-linus
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++ (Bastien Nocera)
|
Revision tags: v5.15.72 |
|
#
97acb6a8 |
| 03-Oct-2022 |
Tvrtko Ursulin <tvrtko.ursulin@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko
Merge drm/drm-next into drm-intel-gt-next
Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
show more ...
|
Revision tags: v6.0 |
|
#
305a72ef |
| 01-Oct-2022 |
Dan Williams <dan.j.williams@intel.com> |
Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next
Add v6.1 content on top of some straggling updates that missed v6.0.
|
Revision tags: v5.15.71 |
|
#
70d1b1a7 |
| 27-Sep-2022 |
Leon Romanovsky <leonro@nvidia.com> |
Merge branch 'mlx5-vfio' into mlx5-next
Merge net/mlx5 dependencies for device DMA logging.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
#
b3bbcc5d |
| 24-Sep-2022 |
Dan Williams <dan.j.williams@intel.com> |
Merge branch 'for-6.0/dax' into libnvdimm-fixes
Pick up another "Soft Reservation" fix for v6.0-final on top of some straggling nvdimm fixes that missed v5.19.
|
Revision tags: v5.15.70 |
|
#
74656d03 |
| 21-Sep-2022 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v6.0-rc6' into locking/core, to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v5.15.69, v5.15.68 |
|
#
a108772d |
| 14-Sep-2022 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
We need 6.0-rc1 to merge the backlight rework PR.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
Revision tags: v5.15.67, v5.15.66 |
|
#
2a906db2 |
| 06-Sep-2022 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'am5748-fix' into fixes
|
Revision tags: v5.15.65 |
|
#
10438976 |
| 02-Sep-2022 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into x86/mm, to refresh the branch
This branch is ~14k commits behind upstream, and has an old merge base from early into the merge window, refresh it to v6.0-rc3+fixes before q
Merge branch 'linus' into x86/mm, to refresh the branch
This branch is ~14k commits behind upstream, and has an old merge base from early into the merge window, refresh it to v6.0-rc3+fixes before queueing up new commits.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v5.15.64 |
|
#
53aa930d |
| 30-Aug-2022 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit
Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
917bda9a |
| 29-Aug-2022 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.
Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove runtime info pri
Merge drm/drm-next into drm-intel-next
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.
Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove runtime info printing from time stamp logging") yet, only drm-intel-gt-next, will need to do that as part of the merge here to build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
Revision tags: v5.15.63, v5.15.62 |
|
#
93fbff11 |
| 17-Aug-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C bus
Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C bus remove() method.
show more ...
|
Revision tags: v5.15.61 |
|
#
cf36ae3e |
| 17-Aug-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Backmerging for v6.0-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
6de9eb21 |
| 11-Aug-2022 |
Huacai Chen <chenhuacai@loongson.cn> |
Merge 'irq/loongarch', 'pci/ctrl/loongson' and 'pci/header-cleanup-immutable'
LoongArch architecture changes for 5.20 depend on the irqchip and pci changes to work, so merge them to create a base.
|
Revision tags: v5.15.60 |
|
#
668c3c23 |
| 06-Aug-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "As the diffstat shows, we've had lots of developments in a wide range
Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "As the diffstat shows, we've had lots of developments in a wide range at this time; the majority of changes are about ASoC, including subsystem-wide cleanups, continued SOF / Intel updates and a bunch of new drivers (as usual), while there have been some significant (but almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't notice, but on the devices with tons of control elements, it can be visibly faster
- Support for input validation for controls; this will harden for badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits) ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx ALSA: line6: Replace sprintf() with sysfs_emit() ALSA: hda: Replace sprintf() with sysfs_emit() ALSA: pcm: Replace sprintf() with sysfs_emit() ALSA: core: Replace scnprintf() with sysfs_emit() ALSA: control-led: Replace sprintf() with sysfs_emit() ALSA: aoa: Replace sprintf() with sysfs_emit() ALSA: ac97: Replace sprintf() with sysfs_emit() ALSA: hda/realtek: Add quirk for Clevo NV45PZ ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7 ALSA: control: Use deferred fasync helper ALSA: pcm: Use deferred fasync helper ALSA: timer: Use deferred fasync helper ALSA: core: Add async signal helpers ASoC: q6asm: use kcalloc() instead of kzalloc() ACPI: scan: Add CLSA0101 Laptop Support ALSA: hda: cs35l41: Support CLSA0101 ALSA: hda: cs35l41: Use the CS35L41 HDA internal define ASoC: dt-bindings: use spi-peripheral-props.yaml ASoC: codecs: va-macro: use fsgen as clock ...
show more ...
|
#
eff0cb3d |
| 04-Aug-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas: "Enumeration:
- Consolidate duplicated 'next function' scanning a
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas: "Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle)
Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese)
- Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
show more ...
|
#
c4f36c3a |
| 04-Aug-2022 |
Bjorn Helgaas <bhelgaas@google.com> |
Merge branch 'pci/header-cleanup-immutable'
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne)
- Remove isa_dma_bridge_buggy, except for x86
Merge branch 'pci/header-cleanup-immutable'
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne)
- Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used (Stafford Horne)
- Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne)
- Move common PCI definitions that arches sometimes override to asm-generic/pci.h (Stafford Horne)
- Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed (bisection hole here) (Randy Dunlap)
* pci/header-cleanup-immutable: PCI: Stub __pci_ioport_map() for arches that don't support it at all x86/cyrix: include header linux/isa-dma.h asm-generic: Add new pci.h and use it csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE PCI: Move isa_dma_bridge_buggy out of asm/dma.h PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
show more ...
|
Revision tags: v5.15.59 |
|
#
9769e44d |
| 01-Aug-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
|
Revision tags: v5.19 |
|
#
0757060a |
| 29-Jul-2022 |
Stafford Horne <shorne@gmail.com> |
Merge branch 'pci/header-cleanup-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
The OpenRISC PCI support depends on the fixups done in the pci/header-cleanup-immutable b
Merge branch 'pci/header-cleanup-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
The OpenRISC PCI support depends on the fixups done in the pci/header-cleanup-immutable branch. Also, there are OpenRISC irqchip fixups in v5.19-rc6 that are needed to test the virt platform.
This merge creates a base for the OpenRISC PCI changes.
show more ...
|
Revision tags: v5.15.58, v5.15.57 |
|
#
abb4970a |
| 22-Jul-2022 |
Stafford Horne <shorne@gmail.com> |
PCI: Move isa_dma_bridge_buggy out of asm/dma.h
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defi
PCI: Move isa_dma_bridge_buggy out of asm/dma.h
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions.
[bhelgaas: commit log] Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
show more ...
|
Revision tags: v5.15.56, v5.15.55 |
|
#
281dee67 |
| 13-Jul-2022 |
Takashi Iwai <tiwai@suse.de> |
ALSA: core: Fix missing return value comments for kernel docs
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for
ALSA: core: Fix missing return value comments for kernel docs
Each kernel doc comment expects the definition of the return value in a proper format. This patch adds or fixes the missing entries for the remaining ALSA core API functions.
Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15 |
|
#
762f99f4 |
| 15-Jan-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.17 merge window.
|