Merge tag 'v6.6.11' into dev-6.6

This is the 6.6.11 stable release

vfio/mtty: Overhaul mtty interrupt handling

[ Upstream commit 293fbc28818135743f54d46c418ede3e4a20a742 ]

The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims

vfio/mtty: Overhaul mtty interrupt handling

[ Upstream commit 293fbc28818135743f54d46c418ede3e4a20a742 ]

The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims to support mask and unmask of INTx, but actually
does nothing. It claims to support AUTOMASK for INTx, but doesn't. It
fails to teardown eventfds under the full semantics specified by the
SET_IRQS ioctl. It also fails to teardown eventfds when the device is
closed, leading to memory leaks. It claims to support the request IRQ,
but doesn't.

Fix all these.

A side effect of this is that QEMU will now report a warning:

vfio <uuid>: Failed to set up UNMASK eventfd signaling for interrupt \
INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device

The fact is that the unmask eventfd was never supported but quietly
failed. mtty never honored the AUTOMASK behavior, therefore there
was nothing to unmask. QEMU is verbose about the failure, but
properly falls back to userspace unmasking.

Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- VFIO direct character device (cdev) interface support. This extracts
the vfio devic

Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)

- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)

- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)

- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)

- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)

- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)

* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge branch 'v6.6/vfio/cdev' of https://github.com/awilliam/linux-vfio into iommufd for-next

Shared branch with VFIO containing the enablement for VFIO "cdev"
devices. This is required by following

Merge branch 'v6.6/vfio/cdev' of https://github.com/awilliam/linux-vfio into iommufd for-next

Shared branch with VFIO containing the enablement for VFIO "cdev"
devices. This is required by following iommufd patches which add new
ioctls to the VFIO cdev.

=======
Existing VFIO provides group-centric user APIs for userspace. Userspace
opens the /dev/vfio/$group_id first before getting device fd and hence
getting access to device. This is not the desired model for iommufd. Per
the conclusion of community discussion[1], iommufd provides device-centric
kAPIs and requires its consumer (like VFIO) to be device-centric user
APIs. Such user APIs are used to associate device with iommufd and also
the I/O address spaces managed by the iommufd.

This series first introduces a per device file structure to be prepared
for further enhancement and refactors the kvm-vfio code to be prepared
for accepting device file from userspace. After this, adds a mechanism for
blocking device access before iommufd bind. Then refactors the vfio to be
able to handle cdev paths (e.g. iommufd binding, no-iommufd, [de]attach ioas).
This refactor includes making the device_open exclusive between the group
and the cdev path, only allow single device open in cdev path; vfio-iommufd
code is also refactored to support cdev. e.g. split the vfio_iommufd_bind()
into two steps. Eventually, adds the cdev support for vfio device and the
new ioctls, then makes group infrastructure optional as it is not needed
when vfio device cdev is compiled.

This series is based on some preparation works done to vfio emulated devices[2]
and vfio pci hot reset enhancements[3]. Per discussion[4], this series does not
support cdev for physical devices that do not have IOMMU. Such devices only
have group-centric user APIs.

This series is a prerequisite for iommu nesting for vfio device[5] [6].

[1] https://lore.kernel.org/kvm/BN9PR11MB5433B1E4AE5B0480369F97178C189@BN9PR11MB5433.namprd11.prod.outlook.com/
[2] https://lore.kernel.org/kvm/20230327093351.44505-1-yi.l.liu@intel.com/ - merged
[3] https://lore.kernel.org/kvm/20230718105542.4138-1-yi.l.liu@intel.com/
[4] https://lore.kernel.org/kvm/20230525095939.37ddb8ce.alex.williamson@redhat.com/
[5] https://lore.kernel.org/linux-iommu/20230511143844.22693-1-yi.l.liu@intel.com/
[6] https://lore.kernel.org/linux-iommu/20230511145110.27707-1-yi.l.liu@intel.com/#t
=======

* 'v6.6/vfio/cdev' of https://github.com/awilliam/linux-vfio: (36 commits)
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
vfio: Add VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT
vfio: Add VFIO_DEVICE_BIND_IOMMUFD
vfio: Avoid repeated user pointer cast in vfio_device_fops_unl_ioctl()
iommufd: Add iommufd_ctx_from_fd()
vfio: Test kvm pointer in _vfio_device_get_kvm_safe()
vfio: Add cdev for vfio_device
vfio: Move device_del() before waiting for the last vfio_device registration refcount
vfio: Move vfio_device_group_unregister() to be the first operation in unregister
vfio-iommufd: Add detach_ioas support for emulated VFIO devices
iommufd/device: Add iommufd_access_detach() API
vfio-iommufd: Add detach_ioas support for physical VFIO devices
vfio: Record devid in vfio_device_file
vfio-iommufd: Split bind/attach into two steps
vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()
vfio: Make vfio_df_open() single open for device cdev path
vfio: Add cdev_device_open_cnt to vfio_group
vfio: Block device access via device fd until device is opened
vfio: Pass struct vfio_device_file * to vfio_device_open/close()
kvm/vfio: Accept vfio device file from userspace
kvm/vfio: Prepare for accepting vfio device fd
vfio: Accept vfio device file in the KVM facing kAPI
vfio: Refine vfio file kAPIs for KVM
vfio: Allocate per device file structure
vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET
vfio/pci: Copy hot-reset device info to userspace in the devices loop
vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev
vfio: Add helper to search vfio_device in a dev_set
...

show more ...

vfio-iommufd: Add detach_ioas support for emulated VFIO devices

This prepares for adding DETACH ioctl for emulated VFIO devices.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gu

vfio-iommufd: Add detach_ioas support for emulated VFIO devices

This prepares for adding DETACH ioctl for emulated VFIO devices.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.

Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.

This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.

The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.

Other than those changes, included in here are a small set of other
things:

- kobject logging improvements

- cacheinfo improvements and updates

- obligatory fw_devlink updates and fixes

- documentation updates

- device property cleanups and const * changes

- firwmare loader dependency fixes.

All of these have been in linux-next for a while with no reported
problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...

show more ...

Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd

Pull iommufd updates from Jason Gunthorpe:
"Two series:

- Reorganize how the hardware page table objec

Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd

Pull iommufd updates from Jason Gunthorpe:
"Two series:

- Reorganize how the hardware page table objects are managed,
particularly their destruction flow. Increase the selftest test
coverage in this area by creating a more complete mock iommu
driver.

This is preparation to add a replace operation for HWPT binding,
which is done but waiting for the VFIO parts to complete so there
is a user.

- Split the iommufd support for "access" to make it two step -
allocate an access then link it to an IOAS. Update VFIO and have
VFIO always create an access even for the VFIO mdevs that never do
DMA.

This is also preperation for the replace VFIO series that will
allow replace to work on access types as well.

Three minor fixes:

- Sykzaller found the selftest code didn't check for overflow when
processing user VAs

- smatch noted a .data item should have been static

- Add a selftest that reproduces a syzkaller bug for batch carry
already fixed in rc"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
iommufd/selftest: Cover domain unmap with huge pages and access
iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
iommufd/selftest: Catch overflow of uptr and length
iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
iommufd/selftest: Make selftest create a more complete mock device
iommufd/selftest: Rename the remaining mock device_id's to stdev_id
iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
iommufd: Move iommufd_device to iommufd_private.h
iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
iommufd: Consistently manage hwpt_item
iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
...

show more ...

Merge branch 'vfio_mdev_ops' into iommufd.git for-next

Yi Liu says

===================
The .bind_iommufd op of vfio emulated devices are either empty or does
nothing. This is different with the vfi

Merge branch 'vfio_mdev_ops' into iommufd.git for-next

Yi Liu says

===================
The .bind_iommufd op of vfio emulated devices are either empty or does
nothing. This is different with the vfio physical devices, to add vfio
device cdev, need to make them act the same.

This series first makes the .bind_iommufd op of vfio emulated devices to
create iommufd_access, this introduces a new iommufd API. Then let the
driver that does not provide .bind_iommufd op to use the vfio emulated
iommufd op set. This makes all vfio device drivers have consistent iommufd
operations, which is good for adding new device uAPIs in the device cdev
===================

* branch 'vfio_mdev_ops':
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers

This harmonizes the no-DMA devices (the vfio-mdev sample drivers) with
the emulated devices (gvt-g, vfio-ap etc.). It mak

vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers

This harmonizes the no-DMA devices (the vfio-mdev sample drivers) with
the emulated devices (gvt-g, vfio-ap etc.). It makes it easier to add
BIND_IOMMUFD user interface which requires to return an iommufd ID to
represent the device/iommufd bond.

Link: https://lore.kernel.org/r/20230327093351.44505-6-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

driver core: class: remove module * from class_create()

The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
s

driver core: class: remove module * from class_create()

The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.