Merge tag 'v6.6.68' into for/openbmc/dev-6.6

This is the 6.6.68 stable release

net/smc: check return value of sock_recvmsg when draining clc data

[ Upstream commit c5b8ee5022a19464783058dc6042e8eefa34e8cd ]

When receiving clc msg, the field length in smc_clc_msg_hdr indicates

net/smc: check return value of sock_recvmsg when draining clc data

[ Upstream commit c5b8ee5022a19464783058dc6042e8eefa34e8cd ]

When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.

This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.

Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg

[ Upstream commit 7863c9f3d24ba49dbead7e03dfbe40deb5888fdf ]

When receiving proposal msg in server, the fields v2_ext_of

net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg

[ Upstream commit 7863c9f3d24ba49dbead7e03dfbe40deb5888fdf ]

When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.

This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.

Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg

[ Upstream commit a29e220d3c8edbf0e1beb0f028878a4a85966556 ]

When receiving proposal msg in server, the field iparea_o

net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg

[ Upstream commit a29e220d3c8edbf0e1beb0f028878a4a85966556 ]

When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.

This patch checks iparea_offset and ipv6_prefixes_cnt before using them.

Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.66' into for/openbmc/dev-6.6

This is the 6.6.66 stable release

net/smc: compatible with 128-bits extended GID of virtual ISM device

[ Upstream commit b40584d145700addc70cc29e4f0850a4ed955b1c ]

According to virtual ISM support feature defined by SMCv2.1, GIDs o

net/smc: compatible with 128-bits extended GID of virtual ISM device

[ Upstream commit b40584d145700addc70cc29e4f0850a4ed955b1c ]

According to virtual ISM support feature defined by SMCv2.1, GIDs of
virtual ISM device are UUIDs defined by RFC4122, which are 128-bits
long. So some adaptation work is required. And note that the GIDs of
existing platform firmware ISM devices still remain 64-bits long.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0541db8ee32c ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: unify the structs of accept or confirm message for v1 and v2

[ Upstream commit 9505450d55b0f7809fe63c36ad9339a909461c87 ]

The structs of CLC accept and confirm messages for SMCv1 and SMCv2

net/smc: unify the structs of accept or confirm message for v1 and v2

[ Upstream commit 9505450d55b0f7809fe63c36ad9339a909461c87 ]

The structs of CLC accept and confirm messages for SMCv1 and SMCv2 are
separately defined and often casted to each other in the code, which may
increase the risk of errors caused by future divergence of them. So
unify them into one struct for better maintainability.

Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0541db8ee32c ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: introduce sub-functions for smc_clc_send_confirm_accept()

[ Upstream commit 5205ac4483b630e47c65f192a3ac19be7a8ea648 ]

There is a large if-else block in smc_clc_send_confirm_accept() and i

net/smc: introduce sub-functions for smc_clc_send_confirm_accept()

[ Upstream commit 5205ac4483b630e47c65f192a3ac19be7a8ea648 ]

There is a large if-else block in smc_clc_send_confirm_accept() and it
is better to split it into two sub-functions.

Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0541db8ee32c ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: rename some 'fce' to 'fce_v2x' for clarity

[ Upstream commit ac053a169c71ceb0f25f784fce9ea720455097b4 ]

Rename some functions or variables with 'fce' in their name but used in
SMCv2.1 as '

net/smc: rename some 'fce' to 'fce_v2x' for clarity

[ Upstream commit ac053a169c71ceb0f25f784fce9ea720455097b4 ]

Rename some functions or variables with 'fce' in their name but used in
SMCv2.1 as 'fce_v2x' for clarity.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0541db8ee32c ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

Merge tag 'v6.6.7' into dev-6.6

This is the 6.6.7 stable release

net/smc: disable SEID on non-s390 archs where virtual ISM may be used

[ Upstream commit c6b8b8eb49904018e22e4e4b1fa502e57dc747d9 ]

The system EID (SEID) is an internal EID used by SMC-D to represen

net/smc: disable SEID on non-s390 archs where virtual ISM may be used

[ Upstream commit c6b8b8eb49904018e22e4e4b1fa502e57dc747d9 ]

The system EID (SEID) is an internal EID used by SMC-D to represent the
s390 physical machine that OS is executing on. On s390 architecture, it
predefined by fixed string and part of cpuid and is enabled regardless
of whether underlay device is virtual ISM or platform firmware ISM.

However on non-s390 architectures where SMC-D can be used with virtual
ISM devices, there is no similar information to identify physical
machines, especially in virtualization scenarios. So in such cases, SEID
is forcibly disabled and the user-defined UEID will be used to represent
the communicable space.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net/smc: fix missing byte order conversion in CLC handshake

[ Upstream commit c5a10397d4571bcfd4bd7ca211ee47bcb6792ec3 ]

The byte order conversions of ISM GID and DMB token are missing in
process o

net/smc: fix missing byte order conversion in CLC handshake

[ Upstream commit c5a10397d4571bcfd4bd7ca211ee47bcb6792ec3 ]

The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.

Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.

show more ...

BackMerge tag 'v6.5-rc7' into drm-next

Linux 6.5-rc7

This is needed for the CI stuff and the msm pull has fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Add cs42l43 PC focused SoundWire CODEC

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The c

Add cs42l43 PC focused SoundWire CODEC

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The chain is currently based of Lee's for-mfd-next
branch.

This series is mostly just a resend keeping pace with the kernel under
it, except for a minor fixup in the ASoC stuff.

Thanks,
Charles

Charles Keepax (4):
dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding
mfd: cs42l43: Add support for cs42l43 core driver
pinctrl: cs42l43: Add support for the cs42l43
ASoC: cs42l43: Add support for the cs42l43

Lucas Tanure (2):
soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
spi: cs42l43: Add SPI controller support

.../bindings/sound/cirrus,cs42l43.yaml | 313 +++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 23 +
drivers/mfd/Makefile | 3 +
drivers/mfd/cs42l43-i2c.c | 98 +
drivers/mfd/cs42l43-sdw.c | 239 ++
drivers/mfd/cs42l43.c | 1188 +++++++++
drivers/mfd/cs42l43.h | 28 +
drivers/pinctrl/cirrus/Kconfig | 11 +
drivers/pinctrl/cirrus/Makefile | 2 +
drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++
drivers/soundwire/bus.c | 32 +
drivers/soundwire/bus_type.c | 12 +
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cs42l43.c | 284 ++
include/linux/mfd/cs42l43-regs.h | 1184 +++++++++
include/linux/mfd/cs42l43.h | 102 +
include/linux/soundwire/sdw.h | 9 +
include/sound/cs42l43.h | 17 +
sound/soc/codecs/Kconfig | 16 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs42l43-jack.c | 946 +++++++
sound/soc/codecs/cs42l43-sdw.c | 74 +
sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++
sound/soc/codecs/cs42l43.h | 131 +
26 files changed, 7615 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
create mode 100644 drivers/mfd/cs42l43-i2c.c
create mode 100644 drivers/mfd/cs42l43-sdw.c
create mode 100644 drivers/mfd/cs42l43.c
create mode 100644 drivers/mfd/cs42l43.h
create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
create mode 100644 drivers/spi/spi-cs42l43.c
create mode 100644 include/linux/mfd/cs42l43-regs.h
create mode 100644 include/linux/mfd/cs42l43.h
create mode 100644 include/sound/cs42l43.h
create mode 100644 sound/soc/codecs/cs42l43-jack.c
create mode 100644 sound/soc/codecs/cs42l43-sdw.c
create mode 100644 sound/soc/codecs/cs42l43.c
create mode 100644 sound/soc/codecs/cs42l43.h

--
2.30.2

show more ...

Merge tag 'v6.5-rc6' into icc-next

The fixes that got merged into v6.5-rc6 are needed here.

Signed-off-by: Georgi Djakov <djakov@kernel.org>

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kr

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'smc-features'

Guangguan Wang says:

====================
net/smc: several features's implementation for smc v2.1

This patch set implement several new features in SMC v2.1(https://
www

Merge branch 'smc-features'

Guangguan Wang says:

====================
net/smc: several features's implementation for smc v2.1

This patch set implement several new features in SMC v2.1(https://
www.ibm.com/support/pages/node/7009315), including vendor unique
experimental options, max connections per lgr negotiation, max links
per lgr negotiation.

v1 - v2:
- rename field fce_v20 to fce_v2_base in struct
smc_clc_first_contact_ext_v2x
- use smc_get_clc_first_contact_ext in smc_connect
_rdma_v2_prepare
- adding comment about field vendor_oui in struct
smc_clc_msg_smcd
- remove comment about SMC_CONN_PER_LGR_MAX in smc_
clc_srv_v2x_features_validate
- rename smc_clc_clnt_v2x_features_validate

RFC v2 - v1:
- more description in commit message
- modify SMC_CONN_PER_LGR_xxx and SMC_LINKS_ADD_LNK_xxx
macro defination and usage
- rename field release_ver to release_nr
- remove redundant release version check in client
- explicitly set the rc value in smc_llc_cli/srv_add_link

RFC v1 - RFC v2:
- Remove ini pointer NULL check and fix code style in
smc_clc_send_confirm_accept.
- Optimize the max_conns check in smc_clc_xxx_v2x_features_validate.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/smc: support max links per lgr negotiation in clc handshake

Support max links per lgr negotiation in clc handshake for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for the

net/smc: support max links per lgr negotiation in clc handshake

Support max links per lgr negotiation in clc handshake for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for the final
value of max links based on the client preferred max links and
self-preferred max links. Here use the minimum value of the client
preferred max links and server preferred max links.

Client Server
Proposal(max links(client preferred))
-------------------------------------->

Accept(max links(accepted value))
accepted value=min(client preferred, server preferred)
<-------------------------------------

Confirm(max links(accepted value))
------------------------------------->

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/smc: support max connections per lgr negotiation

Support max connections per lgr negotiation for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for
the final value of max co

net/smc: support max connections per lgr negotiation

Support max connections per lgr negotiation for SMCR v2.1,
which is one of smc v2.1 features. Server makes decision for
the final value of max conns based on the client preferred
max conns and self-preferred max conns. Here use the minimum
value of client preferred max conns and server preferred max
conns.

Client Server
Proposal(max conns(client preferred))
------------------------------------>

Accept(max conns(accepted value))
accepted value=min(client preferred, server preferred)
<-----------------------------------

Confirm(max conns(accepted value))
----------------------------------->

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/smc: support smc v2.x features validate

Support SMC v2.x features validate for SMC v2.1. This is the frame
code for SMC v2.x features validate, and will take effects only when
the negotiated rel

net/smc: support smc v2.x features validate

Support SMC v2.x features validate for SMC v2.1. This is the frame
code for SMC v2.x features validate, and will take effects only when
the negotiated release version is v2.1 or later.

For Server, v2.x features' validation should be done in smc_clc_srv_
v2x_features_validate when receiving v2.1 or later CLC Proposal Message,
such as max conns, max links negotiation, the decision of the final
value of max conns and max links should be made in this function.
And final check for server when receiving v2.1 or later CLC Confirm
Message should be done in smc_clc_v2x_features_confirm_check.

For client, v2.x features' validation should be done in smc_clc_clnt_
v2x_features_validate when receiving v2.1 or later CLC Accept Message,
for example, the decision to accpt the accepted value or to decline
should be made in this function.

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/smc: add vendor unique experimental options area in clc handshake

Add vendor unique experimental options area in clc handshake. In clc
accept and confirm msg, vendor unique experimental options

net/smc: add vendor unique experimental options area in clc handshake

Add vendor unique experimental options area in clc handshake. In clc
accept and confirm msg, vendor unique experimental options use the
16-Bytes reserved field, which defined in struct smc_clc_fce_gid_ext
in previous version. Because of the struct smc_clc_first_contact_ext
is widely used and limit the scope of modification, this patch moves
the 16-Bytes reserved field out of struct smc_clc_fce_gid_ext, and
followed with the struct smc_clc_first_contact_ext in a new struct
names struct smc_clc_first_contact_ext_v2x.

For SMC-R first connection, in previous version, the struct smc_clc_
first_contact_ext and the 16-Bytes reserved field has already been
included in clc accept and confirm msg. Thus, this patch use struct
smc_clc_first_contact_ext_v2x instead of the struct smc_clc_first_
contact_ext and the 16-Bytes reserved field in SMC-R clc accept and
confirm msg is compatible with previous version.

For SMC-D first connection, in previous version, only the struct smc_
clc_first_contact_ext is included in clc accept and confirm msg, and
the 16-Bytes reserved field is not included. Thus, when the negotiated
smc release version is the version before v2.1, we still use struct
smc_clc_first_contact_ext for compatible consideration. If the negotiated
smc release version is v2.1 or later, use struct smc_clc_first_contact_
ext_v2x instead.

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...