Revision tags: v6.6.67, v6.6.66, v6.6.65, v6.6.64, v6.6.63, v6.6.62, v6.6.61, v6.6.60, v6.6.59, v6.6.58, v6.6.57, v6.6.56, v6.6.55, v6.6.54, v6.6.53, v6.6.52 |
|
#
ca2478a7 |
| 12-Sep-2024 |
Andrew Jeffery <andrew@codeconstruct.com.au> |
Merge tag 'v6.6.51' into for/openbmc/dev-6.6
This is the 6.6.51 stable release
|
Revision tags: v6.6.51, v6.6.50, v6.6.49 |
|
#
c6c535a4 |
| 03-Sep-2024 |
Jonas Gorski <jonas.gorski@bisdn.de> |
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
[ Upstream commit bee2ef946d3184e99077be526567d791c473036f ]
When userspace wants to take over a fdb entry by setting it as EXTERN_LEA
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
[ Upstream commit bee2ef946d3184e99077be526567d791c473036f ]
When userspace wants to take over a fdb entry by setting it as EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER flag set.
If userspace then wants to take over the entry again, br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless if this was a user fdb entry or not.
Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.6.48, v6.6.47, v6.6.46, v6.6.45, v6.6.44, v6.6.43, v6.6.42, v6.6.41, v6.6.40, v6.6.39, v6.6.38, v6.6.37, v6.6.36, v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13 |
|
#
7ae9fb1b |
| 21-Feb-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.3 merge window.
|
Revision tags: v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8 |
|
#
6f849817 |
| 19-Jan-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging into drm-misc-next to get DRM accelerator infrastructure, which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.7, v6.1.6, v6.1.5, v6.0.19 |
|
#
407da561 |
| 09-Jan-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.2-rc3' into next
Merge with mainline to bring in timer_shutdown_sync() API.
|
Revision tags: v6.0.18, v6.1.4, v6.1.3, v6.0.17 |
|
#
2c55d703 |
| 03-Jan-2023 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-fixes into drm-misc-fixes
Let's start the fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
0d8eae7b |
| 02-Jan-2023 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up with v6.2-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
Revision tags: v6.1.2, v6.0.16 |
|
#
b501d4dc |
| 30-Dec-2022 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Sync after v6.2-rc1 landed in drm-next.
We need to get some dependencies in place before we can merge the fixes series from Gwan-gyeong and Chris.
Referen
Merge drm/drm-next into drm-intel-gt-next
Sync after v6.2-rc1 landed in drm-next.
We need to get some dependencies in place before we can merge the fixes series from Gwan-gyeong and Chris.
References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
#
6599e683 |
| 28-Dec-2022 |
Mauro Carvalho Chehab <mchehab@kernel.org> |
Merge tag 'v6.2-rc1' into media_tree
Linux 6.2-rc1
* tag 'v6.2-rc1': (14398 commits) Linux 6.2-rc1 treewide: Convert del_timer*() to timer_shutdown*() pstore: Properly assign mem_type propert
Merge tag 'v6.2-rc1' into media_tree
Linux 6.2-rc1
* tag 'v6.2-rc1': (14398 commits) Linux 6.2-rc1 treewide: Convert del_timer*() to timer_shutdown*() pstore: Properly assign mem_type property pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES cfi: Fix CFI failure with KASAN perf python: Fix splitting CC into compiler and options afs: Stop implementing ->writepage() afs: remove afs_cache_netfs and afs_zap_permits() declarations afs: remove variable nr_servers afs: Fix lost servers_outstanding count ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl() gcov: add support for checksum field test_maple_tree: add test for mas_spanning_rebalance() on insufficient data maple_tree: fix mas_spanning_rebalance() on insufficient data hugetlb: really allocate vma lock for all sharable vmas kmsan: export kmsan_handle_urb kmsan: include linux/vmalloc.h mm/mempolicy: fix memory leak in set_mempolicy_home_node system call mm, mremap: fix mremap() expanding vma with addr inside vma ...
show more ...
|
Revision tags: v6.1.1, v6.0.15, v6.0.14 |
|
#
1a931707 |
| 16-Dec-2022 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf/core
To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf: Hashmap interface update to allow both long and void* keys/values"),
Merge remote-tracking branch 'torvalds/master' into perf/core
To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf: Hashmap interface update to allow both long and void* keys/values"), where a function present upstream was removed in the perf tools development tree.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
Revision tags: v6.0.13 |
|
#
4f2c0a4a |
| 13-Dec-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-linus
|
#
7e68dd7d |
| 13-Dec-2022 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "Core:
- Allow live renaming when an interface is up
- Ad
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing data races
- De-duplicate common code between OVS and conntrack offloading infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF programs
- Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting, and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error reporting
- RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking
- IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and migratable
- Extend devlink-rate to support strict prioriry and weighted fair queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter
- PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S
- PTP: - Orolia ART-CARD
- WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices
- Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support
- Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default
- Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support
- Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan
- MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support
- Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support
- RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
show more ...
|
Revision tags: v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78 |
|
#
0cb9ed57 |
| 09-Nov-2022 |
Jakub Kicinski <kuba@kernel.org> |
Merge branch 'mlxsw-add-802-1x-and-mab-offload-support'
Petr Machata says:
==================== mlxsw: Add 802.1X and MAB offload support
This patchset adds 802.1X [1] and MAB [2] offload support
Merge branch 'mlxsw-add-802-1x-and-mab-offload-support'
Petr Machata says:
==================== mlxsw: Add 802.1X and MAB offload support
This patchset adds 802.1X [1] and MAB [2] offload support in mlxsw.
Patches #1-#3 add the required switchdev interfaces.
Patches #4-#5 add the required packet traps for 802.1X.
Patches #6-#10 are small preparations in mlxsw.
Patch #11 adds locked bridge port support in mlxsw.
Patches #12-#15 add mlxsw selftests. The patchset was also tested with the generic forwarding selftest ('bridge_locked_port.sh').
[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a21d9a670d81103db7f788de1a4a4a6e4b891a0b [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a35ec8e38cdd1766f29924ca391a01de20163931 ====================
Link: https://lore.kernel.org/r/cover.1667902754.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
#
27fabd02 |
| 08-Nov-2022 |
Hans J. Schultz <netdev@kapio-technology.com> |
bridge: switchdev: Allow device drivers to install locked FDB entries
When the bridge is offloaded to hardware, FDB entries are learned and aged-out by the hardware. Some device drivers synchronize
bridge: switchdev: Allow device drivers to install locked FDB entries
When the bridge is offloaded to hardware, FDB entries are learned and aged-out by the hardware. Some device drivers synchronize the hardware and software FDBs by generating switchdev events towards the bridge.
When a port is locked, the hardware must not learn autonomously, as otherwise any host will blindly gain authorization. Instead, the hardware should generate events regarding hosts that are trying to gain authorization and their MAC addresses should be notified by the device driver as locked FDB entries towards the bridge driver.
Allow device drivers to notify the bridge driver about such entries by extending the 'switchdev_notifier_fdb_info' structure with the 'locked' bit. The bit can only be set by device drivers and not by the bridge driver.
Prevent a locked entry from being installed if MAB is not enabled on the bridge port.
If an entry already exists in the bridge driver, reject the locked entry if the current entry does not have the "locked" flag set or if it points to a different port. The same semantics are implemented in the software data path.
Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
#
0884aaf3 |
| 03-Nov-2022 |
Jakub Kicinski <kuba@kernel.org> |
Merge branch 'bridge-add-mac-authentication-bypass-mab-support'
Ido Schimmel says:
==================== bridge: Add MAC Authentication Bypass (MAB) support
Patch #1 adds MAB support in the bridge
Merge branch 'bridge-add-mac-authentication-bypass-mab-support'
Ido Schimmel says:
==================== bridge: Add MAC Authentication Bypass (MAB) support
Patch #1 adds MAB support in the bridge driver. See the commit message for motivation, design choices and implementation details.
Patch #2 adds corresponding test cases.
Follow-up patchsets will add offload support in mlxsw and mv88e6xxx. ====================
Link: https://lore.kernel.org/r/20221101193922.2125323-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v6.0.7, v5.15.77 |
|
#
a35ec8e3 |
| 01-Nov-2022 |
Hans J. Schultz <netdev@kapio-technology.com> |
bridge: Add MAC Authentication Bypass (MAB) support
Hosts that support 802.1X authentication are able to authenticate themselves by exchanging EAPOL frames with an authenticator (Ethernet bridge, in
bridge: Add MAC Authentication Bypass (MAB) support
Hosts that support 802.1X authentication are able to authenticate themselves by exchanging EAPOL frames with an authenticator (Ethernet bridge, in this case) and an authentication server. Access to the network is only granted by the authenticator to successfully authenticated hosts.
The above is implemented in the bridge using the "locked" bridge port option. When enabled, link-local frames (e.g., EAPOL) can be locally received by the bridge, but all other frames are dropped unless the host is authenticated. That is, unless the user space control plane installed an FDB entry according to which the source address of the frame is located behind the locked ingress port. The entry can be dynamic, in which case learning needs to be enabled so that the entry will be refreshed by incoming traffic.
There are deployments in which not all the devices connected to the authenticator (the bridge) support 802.1X. Such devices can include printers and cameras. One option to support such deployments is to unlock the bridge ports connecting these devices, but a slightly more secure option is to use MAB. When MAB is enabled, the MAC address of the connected device is used as the user name and password for the authentication.
For MAB to work, the user space control plane needs to be notified about MAC addresses that are trying to gain access so that they will be compared against an allow list. This can be implemented via the regular learning process with the sole difference that learned FDB entries are installed with a new "locked" flag indicating that the entry cannot be used to authenticate the device. The flag cannot be set by user space, but user space can clear the flag by replacing the entry, thereby authenticating the device.
Locked FDB entries implement the following semantics with regards to roaming, aging and forwarding:
1. Roaming: Locked FDB entries can roam to unlocked (authorized) ports, in which case the "locked" flag is cleared. FDB entries cannot roam to locked ports regardless of MAB being enabled or not. Therefore, locked FDB entries are only created if an FDB entry with the given {MAC, VID} does not already exist. This behavior prevents unauthenticated devices from disrupting traffic destined to already authenticated devices.
2. Aging: Locked FDB entries age and refresh by incoming traffic like regular entries.
3. Forwarding: Locked FDB entries forward traffic like regular entries. If user space detects an unauthorized MAC behind a locked port and wishes to prevent traffic with this MAC DA from reaching the host, it can do so using tc or a different mechanism.
Enable the above behavior using a new bridge port option called "mab". It can only be enabled on a bridge port that is both locked and has learning enabled. Locked FDB entries are flushed from the port once MAB is disabled. A new option is added because there are pure 802.1X deployments that are not interested in notifications about locked FDB entries.
Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4 |
|
#
14e77332 |
| 21-Oct-2022 |
Nick Terrell <terrelln@fb.com> |
Merge branch 'main' into zstd-next
|
Revision tags: v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72 |
|
#
97acb6a8 |
| 03-Oct-2022 |
Tvrtko Ursulin <tvrtko.ursulin@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko
Merge drm/drm-next into drm-intel-gt-next
Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
show more ...
|
Revision tags: v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60 |
|
#
44627916 |
| 05-Aug-2022 |
Andreas Gruenbacher <agruenba@redhat.com> |
Merge part of branch 'for-next.instantiate' into for-next
|
#
fc30eea1 |
| 04-Aug-2022 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up. In special to get the drm-intel-gt-next stuff.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
Revision tags: v5.15.59 |
|
#
8bb5e7f4 |
| 02-Aug-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.20 (or 6.0) merge window.
|
Revision tags: v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55 |
|
#
f83d9396 |
| 14-Jul-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next-fixes
Backmerging from drm/drm-next for the final fixes that will go into v5.20.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v5.15.54 |
|
#
a63f7778 |
| 08-Jul-2022 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.19-rc5' into next
Merge with mainline to bring up the latest definition from MFD subsystem needed for Mediatek keypad driver.
|
Revision tags: v5.15.53 |
|
#
dd84cfff |
| 04-Jul-2022 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major -
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good chunk of it is more stuff that was identified by mixer-test regarding event generation.
show more ...
|
Revision tags: v5.15.52, v5.15.51, v5.15.50, v5.15.49 |
|
#
2b1333b8 |
| 20-Jun-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get new regmap APIs of v5.19-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|