Merge tag 'v6.6.67' into for/openbmc/dev-6.6

This is the 6.6.67 stable release

Bluetooth: ISO: Reassociate a socket with an active BIS

[ Upstream commit fa224d0c094a458e9ebf5ea9b1c696136b7af427 ]

For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be

Bluetooth: ISO: Reassociate a socket with an active BIS

[ Upstream commit fa224d0c094a458e9ebf5ea9b1c696136b7af427 ]

For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be created or terminated independently from each other.

This links together all BIS hcons that are part of the same BIG, so all
hcons are kept alive as long as the BIG is active.

If multiple BIS sockets are opened for a BIG handle, and only part of
them are closed at some point, the associated hcons will be marked as
open. If new sockets will later be opened for the same BIG, they will
be reassociated with the open BIS hcons.

All BIS hcons will be cleaned up and the BIG will be terminated when
the last BIS socket is closed from userspace.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 581dd2dc168f ("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync

commit 18fd04ad856df07733f5bb07e7f7168e7443d393 upstream.

This checks if the ACL connection remains valid as it could be destroyed
while hci_

Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync

commit 18fd04ad856df07733f5bb07e7f7168e7443d393 upstream.

This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:

BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37

CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>

Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e

Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30

Cc: stable@vger.kernel.org
Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED

[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ]

If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DI

Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED

[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ]

If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.

Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT

[ Upstream commit 227a0cdf4a028a73dc256d0f5144b4808d718893 ]

MGMT_OP_DISCONNECT can be called while mgmt_device_connected

Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT

[ Upstream commit 227a0cdf4a028a73dc256d0f5144b4808d718893 ]

MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not
been called yet, which will cause the connection procedure to be
aborted, so mgmt_device_disconnected shall still respond with command
complete to MGMT_OP_DISCONNECT and just not emit
MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never
sent.

To fix this MGMT_OP_DISCONNECT is changed to work similarly to other
command which do use hci_cmd_sync_queue and then use hci_conn_abort to
disconnect and returns the result, in order for hci_conn_abort to be
used from hci_cmd_sync context it now uses hci_cmd_sync_run_once.

Link: https://github.com/bluez/bluez/issues/932
Fixes: 12d4a3b2ccb3 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: hci_sync: Attempt to dequeue connection attempt

[ Upstream commit 881559af5f5c545f6828e7c74d79813eb886d523 ]

If connection is still queued/pending in the cmd_sync queue it means no
comma

Bluetooth: hci_sync: Attempt to dequeue connection attempt

[ Upstream commit 881559af5f5c545f6828e7c74d79813eb886d523 ]

If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: hci_conn: Fix UAF Write in __hci_acl_create_connection_sync

[ Upstream commit 5f641f03abccddd1a37233ff1b8e774b9ff1f4e8 ]

This fixes the UAF on __hci_acl_create_connection_sync caused by

Bluetooth: hci_conn: Fix UAF Write in __hci_acl_create_connection_sync

[ Upstream commit 5f641f03abccddd1a37233ff1b8e774b9ff1f4e8 ]

This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.

Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097ce6e ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: Remove pending ACL connection attempts

[ Upstream commit 4aa42119d971603dc9e4d8cf4f53d5fcf082ea7d ]

With the last commit we moved to using the hci_sync queue for "Create
Connection" requ

Bluetooth: Remove pending ACL connection attempts

[ Upstream commit 4aa42119d971603dc9e4d8cf4f53d5fcf082ea7d ]

With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.

hci_conn_check_pending() was used to trigger this retry, we can remove it
now.

Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.

This is somewhat reverting commit 4c67bc74f016 ("[Bluetooth] Support
concurrent connect requests").

With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: hci_conn: Only do ACL connections sequentially

[ Upstream commit 45340097ce6ea7e875674a5a7d24c95ecbc93ef9 ]

Pretty much all bluetooth chipsets only support paging a single device at
a ti

Bluetooth: hci_conn: Only do ACL connections sequentially

[ Upstream commit 45340097ce6ea7e875674a5a7d24c95ecbc93ef9 ]

Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.

With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.

This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).

We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.

This is very similar to what we're already doing for establishing LE
connections, and it works well there.

Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.48' into for/openbmc/dev-6.6

This is the 6.6.48 stable release

Bluetooth: hci_conn: Check non NULL function before calling for HFP offload

[ Upstream commit 132d0fd0b8418094c9e269e5bc33bf5b864f4a65 ]

For some controllers such as QCA2066, it does not need to se

Bluetooth: hci_conn: Check non NULL function before calling for HFP offload

[ Upstream commit 132d0fd0b8418094c9e269e5bc33bf5b864f4a65 ]

For some controllers such as QCA2066, it does not need to send
HCI_Configure_Data_Path to configure non-HCI data transport path to support
HFP offload, their device drivers may set hdev->get_codec_config_data as
NULL, so Explicitly add this non NULL checking before calling the function.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.39' into dev-6.6

This is the 6.6.39 stable release

bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX

[ Upstream commit 1cc18c2ab2e8c54c355ea7c0423a636e415a0c23 ]

Syzbot hit warning in hci_conn_del() caused by freeing handle tha

bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX

[ Upstream commit 1cc18c2ab2e8c54c355ea7c0423a636e415a0c23 ]

Syzbot hit warning in hci_conn_del() caused by freeing handle that was
not allocated using ida allocator.

This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by
hci_le_big_sync_established_evt(), which makes code think it's unset
connection.

Add same check for handle upper bound as in hci_conn_set_handle() to
prevent warning.

Link: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474
Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com
Fixes: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.33' into dev-6.6

This is the 6.6.33 stable release

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: ISO: Fix BIS cleanup

[ Upstream commit a254b90c9aac3d3d938a07e019773e35a977451b ]

This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command shoul

Bluetooth: ISO: Fix BIS cleanup

[ Upstream commit a254b90c9aac3d3d938a07e019773e35a977451b ]

This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command should be issued. A master BIS should only be
terminated by disabling periodic and extended advertising, and terminating
the BIG.

In case of a Broadcast Receiver, all BIS and PA connections can be
cleaned up by calling hci_conn_failed, since it contains all function
calls that are necessary for successful cleanup.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.32' into dev-6.6

This is the 6.6.32 stable release

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

Bluetooth: hci_sync: Fix overwriting request callback

[ Upstream commit 2615fd9a7c2507eb3be3fbe49dcec88a2f56454a ]

In a few cases the stack may generate commands as responses to events
which would

Bluetooth: hci_sync: Fix overwriting request callback

[ Upstream commit 2615fd9a7c2507eb3be3fbe49dcec88a2f56454a ]

In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: Remove BT_HS

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

h

Bluetooth: Remove BT_HS

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.14' into dev-6.6

This is the 6.6.14 stable release