Merge tag 'v6.6.17' into dev-6.6

This is the 6.6.17 stable release

mm: Introduce flush_cache_vmap_early()

[ Upstream commit 7a92fc8b4d20680e4c20289a670d8fca2d1f2c1b ]

The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot

mm: Introduce flush_cache_vmap_early()

[ Upstream commit 7a92fc8b4d20680e4c20289a670d8fca2d1f2c1b ]

The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).

But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.

So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu

Pull percpu updates from Dennis Zhou:
"One bigger change to percpu_counter's api allowing for init and
de

Merge tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu

Pull percpu updates from Dennis Zhou:
"One bigger change to percpu_counter's api allowing for init and
destroy of multiple counters via percpu_counter_init_many() and
percpu_counter_destroy_many(). This is used to help begin remediating
a performance regression with percpu rss stats.

Additionally, it seems larger core count machines are feeling the
burden of the single threaded allocation of percpu. Mateusz is
thinking about it and I will spend some time on it too.

percpu:

- A couple cleanups by Baoquan He and Bibo Mao. The only behavior
change is to start printing messages if we're under the warn limit
for failed atomic allocations.

percpu_counter:

- Shakeel introduced percpu counters into mm_struct which caused
percpu allocations be on the hot path [1]. Originally I spent some
time trying to improve the percpu allocator, but instead preferred
what Mateusz Guzik proposed grouping at the allocation site,
percpu_counter_init_many(). This allows a single percpu allocation
to be shared by the counters. I like this approach because it
creates a shared lifetime by the allocations. Additionally, I
believe many inits have higher level synchronization requirements,
like percpu_counter does against HOTPLUG_CPU. Therefore we can
group these optimizations together"

Link: https://lore.kernel.org/linux-mm/20221024052841.3291983-1-shakeelb@google.com/ [1]

* tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
kernel/fork: group allocation/free of per-cpu counters for mm struct
pcpcntr: add group allocation/free
mm/percpu.c: print error message too if atomic alloc failed
mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit
mm/percpu.c: remove redundant check
mm/percpu: Remove some local variables in pcpu_populate_pte

show more ...

mm/percpu.c: print error message too if atomic alloc failed

The variable 'err' is assgigned to an error message if atomic alloc
failed, while it has no chance to be printed if is_atomic is true.

He

mm/percpu.c: print error message too if atomic alloc failed

The variable 'err' is assgigned to an error message if atomic alloc
failed, while it has no chance to be printed if is_atomic is true.

Here change to print error message too if atomic alloc failed, while
avoid to call dump_stack() if that case.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>

show more ...

mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit

This removes the need of local varibale 'chunk', and optimize the code
calling pcpu_alloc_first_chunk() to initialize reserved

mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit

This removes the need of local varibale 'chunk', and optimize the code
calling pcpu_alloc_first_chunk() to initialize reserved chunk and
dynamic chunk to make it simpler.

Signed-off-by: Baoquan He <bhe@redhat.com>
[Dennis: reworded first chunk init comment]
Signed-off-by: Dennis Zhou <dennis@kernel.org>

show more ...

mm/percpu.c: remove redundant check

The conditional check "(ai->dyn_size < PERCPU_DYNAMIC_EARLY_SIZE) has
covered the check '(!ai->dyn_size)'.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-

mm/percpu.c: remove redundant check

The conditional check "(ai->dyn_size < PERCPU_DYNAMIC_EARLY_SIZE) has
covered the check '(!ai->dyn_size)'.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>

show more ...

mm/percpu: Remove some local variables in pcpu_populate_pte

In function pcpu_populate_pte there are already variable defined,
it can be reused for later use, here remove duplicated local
variables.

mm/percpu: Remove some local variables in pcpu_populate_pte

In function pcpu_populate_pte there are already variable defined,
it can be reused for later use, here remove duplicated local
variables.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Dennis Zhou <dennis@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

- Daniel Verkamp has contributed a memfd series ("mm/memfd: add

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.

- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.

- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes

- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.

- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".

These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.

- Kairui Song adds a series ("Clean up and fixes for swap").

- Vernon Yang contributed the series "Clean up and refinement for maple
tree".

- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.

- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".

- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".

- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".

- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".

- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".

- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".

- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".

- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.

The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".

- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".

- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".

- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".

- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".

- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".

- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".

- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".

- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"

- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".

- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".

- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.

- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".

- Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

mm: memcontrol: rename memcg_kmem_enabled()

Currently there are two kmem-related helper functions with a confusing
semantics: memcg_kmem_enabled() and mem_cgroup_kmem_disabled().

The problem is tha

mm: memcontrol: rename memcg_kmem_enabled()

Currently there are two kmem-related helper functions with a confusing
semantics: memcg_kmem_enabled() and mem_cgroup_kmem_disabled().

The problem is that an obvious expectation
memcg_kmem_enabled() == !mem_cgroup_kmem_disabled(),
can be false.

mem_cgroup_kmem_disabled() is similar to mem_cgroup_disabled(): it returns
true only if CONFIG_MEMCG_KMEM is not set or the kmem accounting is
disabled using a boot time kernel option "cgroup.memory=nokmem". It never
changes the value dynamically.

memcg_kmem_enabled() is different: it always returns false until the first
non-root memory cgroup will get online (assuming the kernel memory
accounting is enabled). It's goal is to improve the performance on
systems without the cgroupfs mounted/memory controller enabled or on the
systems with only the root memory cgroup.

To make things more obvious and avoid potential bugs, let's rename
memcg_kmem_enabled() to memcg_kmem_online().

Link: https://lkml.kernel.org/r/20230213192922.1146370-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-fixes into drm-misc-fixes

Let's start the fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>