Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge drm/drm-next into drm-intel-next-queued

Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@su

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge branch 'topic/tasklet-convert' into for-linus

Pull tasklet API conversions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge tag 'v5.9-rc2' into regulator-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into asoc-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge v5.9-rc1 into drm-misc-next

Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Mgerge remote-tracking branch 'torvalds/master' into perf/core

To sync headers, for instance, in this case tools/perf was ahead of
upstream till Linus merged tip/perf/core to get the
PERF_RECORD_TEX

Mgerge remote-tracking branch 'torvalds/master' into perf/core

To sync headers, for instance, in this case tools/perf was ahead of
upstream till Linus merged tip/perf/core to get the
PERF_RECORD_TEXT_POKE changes:

Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segm

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segmentation in code TSO code, from Eric Dumazet.

3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.

4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.

5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.

7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.

8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.

9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-13

The following pull-request contains BPF updates for

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).

The main changes are:

1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.

2) Better libbpf support on older kernels, from Andrii.

3) Additional AF_XDP stats, from Ciara.

4) build time resolution of BTF IDs, from Jiri.

5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'trace_printk-banner-remove'

Alan Maguire says:

====================
Steven suggested a way to resolve the appearance of the warning banner
that appears as a result of using trace_prin

Merge branch 'trace_printk-banner-remove'

Alan Maguire says:

====================
Steven suggested a way to resolve the appearance of the warning banner
that appears as a result of using trace_printk() in BPF [1].
Applying the patch and testing reveals all works as expected; we
can call bpf_trace_printk() and see the trace messages in
/sys/kernel/debug/tracing/trace_pipe and no banner message appears.

Also add a test prog to verify basic bpf_trace_printk() helper behaviour.

Changes since v2:

- fixed stray newline in bpf_trace_printk(), use sizeof(buf)
rather than #defined value in vsnprintf() (Daniel, patch 1)
- Daniel also pointed out that vsnprintf() returns 0 on error rather
than a negative value; also turns out that a null byte is not
appended if the length of the string written is zero, so to fix
for cases where the string to be traced is zero length we set the
null byte explicitly (Daniel, patch 1)
- switch to using getline() for retrieving lines from trace buffer
to ensure we don't read a portion of the search message in one
read() operation and then fail to find it (Andrii, patch 2)

Changes since v1:

- reorder header inclusion in bpf_trace.c (Steven, patch 1)
- trace zero-length messages also (Andrii, patch 1)
- use a raw spinlock to ensure there are no issues for PREMMPT_RT
kernels when using bpf_trace_printk() within other raw spinlocks
(Steven, patch 1)
- always enable bpf_trace_printk() tracepoint when loading programs
using bpf_trace_printk() as this will ensure that a user disabling
that tracepoint will not prevent tracing output from being logged
(Steven, patch 1)
- use "tp/raw_syscalls/sys_enter" and a usleep(1) to trigger events
in the selftest ensuring test runs faster (Andrii, patch 2)

[1] https://lore.kernel.org/r/20200628194334.6238b933@oasis.local.home
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

bpf: Use dedicated bpf_trace_printk event instead of trace_printk()

The bpf helper bpf_trace_printk() uses trace_printk() under the hood.
This leads to an alarming warning message originating from t

bpf: Use dedicated bpf_trace_printk event instead of trace_printk()

The bpf helper bpf_trace_printk() uses trace_printk() under the hood.
This leads to an alarming warning message originating from trace
buffer allocation which occurs the first time a program using
bpf_trace_printk() is loaded.

We can instead create a trace event for bpf_trace_printk() and enable
it in-kernel when/if we encounter a program using the
bpf_trace_printk() helper. With this approach, trace_printk()
is not used directly and no warning message appears.

This work was started by Steven (see Link) and finished by Alan; added
Steven's Signed-off-by with his permission.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/r/20200628194334.6238b933@oasis.local.home
Link: https://lore.kernel.org/bpf/1594641154-18897-2-git-send-email-alan.maguire@oracle.com

show more ...