Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

scsi: Remove scsi device no_start_on_resume flag

[ Upstream commit c4367ac83805a2322268c9736cd8ef9124063424 ]

The scsi device flag no_start_on_resume is not set by any scsi low
level driver. Remove

scsi: Remove scsi device no_start_on_resume flag

[ Upstream commit c4367ac83805a2322268c9736cd8ef9124063424 ]

The scsi device flag no_start_on_resume is not set by any scsi low
level driver. Remove it. This reverts the changes introduced by commit
0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume").

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 7a6bbc2829d4 ("scsi: sd: Do not repeat the starting disk message")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.19' into dev-6.6

This is the 6.6.19 stable release

scsi: core: Consult supported VPD page list prior to fetching page

commit b5fc07a5fb56216a49e6c1d0b172d5464d99a89b upstream.

Commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full
pag

scsi: core: Consult supported VPD page list prior to fetching page

commit b5fc07a5fb56216a49e6c1d0b172d5464d99a89b upstream.

Commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full
page") removed the logic which checks whether a VPD page is present on
the supported pages list before asking for the page itself. That was
done because SPC helpfully states "The Supported VPD Pages VPD page
list may or may not include all the VPD pages that are able to be
returned by the device server". Testing had revealed a few devices
that supported some of the 0xBn pages but didn't actually list them in
page 0.

Julian Sikorski bisected a problem with his drive resetting during
discovery to the commit above. As it turns out, this particular drive
firmware will crash if we attempt to fetch page 0xB9.

Various approaches were attempted to work around this. In the end,
reinstating the logic that consults VPD page 0 before fetching any
other page was the path of least resistance. A firmware update for the
devices which originally compelled us to remove the check has since
been released.

Link: https://lore.kernel.org/r/20240214221411.2888112-1-martin.petersen@oracle.com
Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page")
Cc: stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Reviewed-by: Lee Duncan <lee.duncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

scsi: sd: usb_storage: uas: Access media prior to querying device properties

commit 321da3dc1f3c92a12e3c5da934090d2992a8814c upstream.

It has been observed that some USB/UAS devices return generic

scsi: sd: usb_storage: uas: Access media prior to querying device properties

commit 321da3dc1f3c92a12e3c5da934090d2992a8814c upstream.

It has been observed that some USB/UAS devices return generic properties
hardcoded in firmware for mode pages for a period of time after a device
has been discovered. The reported properties are either garbage or they do
not accurately reflect the characteristics of the physical storage device
attached in the case of a bridge.

Prior to commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") we would call revalidate several
times during device discovery. As a result, incorrect values would
eventually get replaced with ones accurately describing the attached
storage. When we did away with the redundant revalidate pass, several
cases were reported where devices reported nonsensical values or would
end up in write-protected state.

An initial attempt at addressing this issue involved introducing a
delayed second revalidate invocation. However, this approach still
left some devices reporting incorrect characteristics.

Tasos Sahanidis debugged the problem further and identified that
introducing a READ operation prior to MODE SENSE fixed the problem and that
it wasn't a timing issue. Issuing a READ appears to cause the devices to
update their state to reflect the actual properties of the storage
media. Device properties like vendor, model, and storage capacity appear to
be correctly reported from the get-go. It is unclear why these devices
defer populating the remaining characteristics.

Match the behavior of a well known commercial operating system and
trigger a READ operation prior to querying device characteristics to
force the device to populate the mode pages.

The additional READ is triggered by a flag set in the USB storage and
UAS drivers. We avoid issuing the READ for other transport classes
since some storage devices identify Linux through our particular
discovery command sequence.

Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com
Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable@vger.kernel.org
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

scsi: sd: Fix system start for ATA devices

commit b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 upstream.

It is not always possible to keep a device in the runtime suspended state
when a system level su

scsi: sd: Fix system start for ATA devices

commit b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 upstream.

It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.

Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.

Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

scsi: Change SCSI device boolean fields to single bit flags

commit 6371be7aeb986905bb60ec73d002fc02343393b4 upstream.

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
man

scsi: Change SCSI device boolean fields to single bit flags

commit 6371be7aeb986905bb60ec73d002fc02343393b4 upstream.

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.

Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.

Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/re

Merge tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/resume fixes.

The regression is that ATA disks are not stopped on system shutdown,
which is not recommended and increases the disks SMART counters for
unclean power off events.

This patch fixes this by refining the recent rework of the scsi device
manage_xxx flags"

* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: sd: Introduce manage_shutdown device flag

show more ...

scsi: sd: Introduce manage_shutdown device flag

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for l

scsi: sd: Introduce manage_shutdown device flag

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").

Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.

Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.

To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.

Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
num

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.

In more detail:

- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)

- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)

- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)

- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)

- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.

This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.

Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

show more ...

scsi: sd: Differentiate system and runtime start/stop management

The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is becaus

scsi: sd: Differentiate system and runtime start/stop management

The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.

For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.

Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.

Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A

Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.6

The rest of the updates for v6.6, some of the highlights include:

- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.

show more ...

BackMerge tag 'v6.5-rc7' into drm-next

Linux 6.5-rc7

This is needed for the CI stuff and the msm pull has fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Add cs42l43 PC focused SoundWire CODEC

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The c

Add cs42l43 PC focused SoundWire CODEC

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The chain is currently based of Lee's for-mfd-next
branch.

This series is mostly just a resend keeping pace with the kernel under
it, except for a minor fixup in the ASoC stuff.

Thanks,
Charles

Charles Keepax (4):
dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding
mfd: cs42l43: Add support for cs42l43 core driver
pinctrl: cs42l43: Add support for the cs42l43
ASoC: cs42l43: Add support for the cs42l43

Lucas Tanure (2):
soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
spi: cs42l43: Add SPI controller support

.../bindings/sound/cirrus,cs42l43.yaml | 313 +++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 23 +
drivers/mfd/Makefile | 3 +
drivers/mfd/cs42l43-i2c.c | 98 +
drivers/mfd/cs42l43-sdw.c | 239 ++
drivers/mfd/cs42l43.c | 1188 +++++++++
drivers/mfd/cs42l43.h | 28 +
drivers/pinctrl/cirrus/Kconfig | 11 +
drivers/pinctrl/cirrus/Makefile | 2 +
drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++
drivers/soundwire/bus.c | 32 +
drivers/soundwire/bus_type.c | 12 +
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cs42l43.c | 284 ++
include/linux/mfd/cs42l43-regs.h | 1184 +++++++++
include/linux/mfd/cs42l43.h | 102 +
include/linux/soundwire/sdw.h | 9 +
include/sound/cs42l43.h | 17 +
sound/soc/codecs/Kconfig | 16 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs42l43-jack.c | 946 +++++++
sound/soc/codecs/cs42l43-sdw.c | 74 +
sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++
sound/soc/codecs/cs42l43.h | 131 +
26 files changed, 7615 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
create mode 100644 drivers/mfd/cs42l43-i2c.c
create mode 100644 drivers/mfd/cs42l43-sdw.c
create mode 100644 drivers/mfd/cs42l43.c
create mode 100644 drivers/mfd/cs42l43.h
create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
create mode 100644 drivers/spi/spi-cs42l43.c
create mode 100644 include/linux/mfd/cs42l43-regs.h
create mode 100644 include/linux/mfd/cs42l43.h
create mode 100644 include/sound/cs42l43.h
create mode 100644 sound/soc/codecs/cs42l43-jack.c
create mode 100644 sound/soc/codecs/cs42l43-sdw.c
create mode 100644 sound/soc/codecs/cs42l43.c
create mode 100644 sound/soc/codecs/cs42l43.h

--
2.30.2

show more ...

Merge tag 'v6.5-rc6' into icc-next

The fixes that got merged into v6.5-rc6 are needed here.

Signed-off-by: Georgi Djakov <djakov@kernel.org>

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kr

Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next

We need the serial-core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Add cs42l43 PC focused SoundWire CODEC

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC.

regulator: Get Synquacer testing working

Merge up v6.5-rc6 which has a fix that gets Synquacer netbooting so we
can include it in our testing.

Merge tag 'v6.5-rc6' into iommufd for-next

Required for following patches.

Resolve merge conflict by using the hunk from the for-next branch and
shifting the iommufd_object_deref_user() into iommuf

Merge tag 'v6.5-rc6' into iommufd for-next

Required for following patches.

Resolve merge conflict by using the hunk from the for-next branch and
shifting the iommufd_object_deref_user() into iommufd_hw_pagetable_put()

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge 6.5-rc6 into usb-next

We need the USB and Thunderbolt fixes in here to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.5-rc6 into char-misc-next

We need the char/misc fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/intel/igc/igc_main.c
06b412

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")

drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")

net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")

tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...