Merge tag 'v6.6.11' into dev-6.6

This is the 6.6.11 stable release

xsk: add multi-buffer support for sockets sharing umem

[ Upstream commit d609f3d228a8efe991f44f11f24146e2a5209755 ]

Userspace applications indicate their multi-buffer capability to xsk
using XSK_US

xsk: add multi-buffer support for sockets sharing umem

[ Upstream commit d609f3d228a8efe991f44f11f24146e2a5209755 ]

Userspace applications indicate their multi-buffer capability to xsk
using XSK_USE_SG socket bind flag. For sockets using shared umem the
bind flag may contain XSK_USE_SG only for the first socket. For any
subsequent socket the only option supported is XDP_SHARED_UMEM.

Add option XDP_UMEM_SG_FLAG in umem config flags to store the
multi-buffer handling capability when indicated by XSK_USE_SG option in
bing flag by the first socket. Use this to derive multi-buffer capability
for subsequent sockets in xsk core.

Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Fixes: 81470b5c3c66 ("xsk: introduce XSK_USE_SG bind flag for xsk socket")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230907035032.2627879-1-tirthendu.sarkar@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2023-07-19

We've added 45 non-merge comm

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2023-07-19

We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).

The main changes are:

1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.

2) BPF link support for tc BPF programs, from Daniel Borkmann.

3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.

4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.

5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================

Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'xsk-multi-buffer-support'

Maciej Fijalkowski says:

====================
xsk: multi-buffer support

v6->v7:
- rebase...[Alexei]

v5->v6:
- update bpf_xdp_query_opts__last_field in patc

Merge branch 'xsk-multi-buffer-support'

Maciej Fijalkowski says:

====================
xsk: multi-buffer support

v6->v7:
- rebase...[Alexei]

v5->v6:
- update bpf_xdp_query_opts__last_field in patch 10 [Alexei]

v4->v5:
- align options argument size to match options from xdp_desc [Benjamin]
- cleanup skb from xdp_sock on socket termination [Toke]
- introduce new netlink attribute for letting user space know about Tx
frag limit; this substitutes xdp_features flag previously dedicated
for setting ZC multi-buffer support [Toke, Jakub]
- include i40e ZC multi-buffer support
- enable TOO_MANY_FRAGS for ZC on xskxceiver; this is now possible due
to netlink attribute mentioned two bullets above

v3->v4:
-rely on ynl for adding new xdp_features flag [Jakub]
- move xskb_list to xsk_buff_pool

v2->v3:
- Fix issue with the next valid packet getting dropped after an invalid
packet with MAX_SKB_FRAGS + 1 frags [Magnus]
- query NETDEV_XDP_ACT_ZC_SG flag within xskxceiver and act on it
- remove redundant include in xsk.c [kernel test robot]
- s/NETDEV_XDP_ACT_NDO_ZC_SG/NETDEV_XDP_ACT_ZC_SG + kernel doc [Magnus,
Simon]

v1->v2:
- fix spelling issues in commit messages [Simon]
- remove XSK_DESC_MAX_FRAGS, use MAX_SKB_FRAGS instead [Stan, Alexei]
- add documentation patch
- fix build error from kernel test robot on patch 10

This series of patches add multi-buffer support for AF_XDP. XDP and
various NIC drivers already have support for multi-buffer packets. With
this patch set, programs using AF_XDP sockets can now also receive and
transmit multi-buffer packets both in copy as well as zero-copy mode.
ZC multi-buffer implementation is based on ice driver.

Some definitions to put us all on the same page:

* A packet consists of one or more frames

* A descriptor in one of the AF_XDP rings always refers to a single
frame. In the case the packet consists of a single frame, the
descriptor refers to the whole packet.

To represent a packet consisting of multiple frames, we introduce a
new flag called XDP_PKT_CONTD in the options field of the Rx and Tx
descriptors. If it is true (1) the packet continues with the next
descriptor and if it is false (0) it means this is the last descriptor
of the packet. Why the reverse logic of end-of-packet (eop) flag found
in many NICs? Just to preserve compatibility with non-multi-buffer
applications that have this bit set to false for all packets on Rx, and
the apps set the options field to zero for Tx, as anything else will
be treated as an invalid descriptor.

These are the semantics for producing packets onto XSK Tx ring
consisting of multiple frames:

* When an invalid descriptor is found, all the other
descriptors/frames of this packet are marked as invalid and not
completed. The next descriptor is treated as the start of a new
packet, even if this was not the intent (because we cannot guess
the intent). As before, if your program is producing invalid
descriptors you have a bug that must be fixed.

* Zero length descriptors are treated as invalid descriptors.

* For copy mode, the maximum supported number of frames in a packet is
equal to CONFIG_MAX_SKB_FRAGS + 1. If it is exceeded, all
descriptors accumulated so far are dropped and treated as
invalid. To produce an application that will work on any system
regardless of this config setting, limit the number of frags to 18,
as the minimum value of the config is 17.

* For zero-copy mode, the limit is up to what the NIC HW
supports. User space can discover this via newly introduced
NETDEV_A_DEV_XDP_ZC_MAX_SEGS netlink attribute.

Here is an example Tx path pseudo-code (using libxdp interfaces for
simplicity) ignoring that the umem is finite in size, and that we
eventually will run out of packets to send. Also assumes pkts.addr
points to a valid location in the umem.

void tx_packets(struct xsk_socket_info *xsk, struct pkt *pkts,
int batch_size)
{
u32 idx, i, pkt_nb = 0;

xsk_ring_prod__reserve(&xsk->tx, batch_size, &idx);

for (i = 0; i < batch_size;) {
u64 addr = pkts[pkt_nb].addr;
u32 len = pkts[pkt_nb].size;

do {
struct xdp_desc *tx_desc;

tx_desc = xsk_ring_prod__tx_desc(&xsk->tx, idx + i++);
tx_desc->addr = addr;

if (len > xsk_frame_size) {
tx_desc->len = xsk_frame_size;
tx_desc->options |= XDP_PKT_CONTD;
} else {
tx_desc->len = len;
tx_desc->options = 0;
pkt_nb++;
}
len -= tx_desc->len;
addr += xsk_frame_size;

if (i == batch_size) {
/* Remember len, addr, pkt_nb for next
* iteration. Skipped for simplicity.
*/
break;
}
} while (len);
}

xsk_ring_prod__submit(&xsk->tx, i);
}

On the Rx path in copy mode, the xsk core copies the XDP data into
multiple descriptors, if needed, and sets the XDP_PKT_CONTD flag as
detailed before. Zero-copy mode in order to avoid the copies has to
maintain a chain of xdp_buff_xsk structs that represent whole packet.
This is because what actually is redirected is the xdp_buff and we
currently have no equivalent mechanism that is used for copy mode
(embedded skb_shared_info in xdp_buff) to carry the frags. This means
xdp_buff_xsk grows in size but these members are at the end and should
not be touched when data path is not dealing with fragmented packets.
This solution kept us within assumed performance impact, hence we
decided to proceed with it.

When the application gets a descriptor with the
XDP_PKT_CONTD flag set to one, it means that the packet consists of
multiple buffers and it continues with the next buffer in the following
descriptor. When a descriptor with XDP_PKT_CONTD == 0 is received, it
means that this is the last buffer of the packet. AF_XDP guarantees that
only a complete packet (all frames in the packet) is sent to the
application.

If application reads a batch of descriptors, using for example the libxdp
interfaces, it is not guaranteed that the batch will end with a full
packet. It might end in the middle of a packet and the rest of the
buffers of that packet will arrive at the beginning of the next batch,
since the libxdp interface does not read the whole ring (unless you
have an enormous batch size or a very small ring size).

Here is a simple Rx path pseudo-code example (using libxdp interfaces for
simplicity). Error paths have been excluded for simplicity:

void rx_packets(struct xsk_socket_info *xsk)
{
static bool new_packet = true;
u32 idx_rx = 0, idx_fq = 0;
static char *pkt;

int rcvd = xsk_ring_cons__peek(&xsk->rx, opt_batch_size, &idx_rx);

xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);

for (int i = 0; i < rcvd; i++) {
struct xdp_desc *desc = xsk_ring_cons__rx_desc(&xsk->rx, idx_rx++);
char *frag = xsk_umem__get_data(xsk->umem->buffer, desc->addr);
bool eop = !(desc->options & XDP_PKT_CONTD);

if (new_packet)
pkt = frag;
else
add_frag_to_pkt(pkt, frag);

if (eop)
process_pkt(pkt);

new_packet = eop;

*xsk_ring_prod__fill_addr(&xsk->umem->fq, idx_fq++) = desc->addr;
}

xsk_ring_prod__submit(&xsk->umem->fq, rcvd);
xsk_ring_cons__release(&xsk->rx, rcvd);
}

We had to introduce a new bind flag (XDP_USE_SG) on the AF_XDP level to
enable multi-buffer support. The reason we need to differentiate between
non multi-buffer and multi-buffer is the behaviour when the kernel gets
a packet that is larger than the frame size. Without multi-buffer, this
packet is dropped and marked in the stats. With multi-buffer on, we want
to split it up into multiple frames instead.

At the start, we thought that riding on the .frags section name of
the XDP program was a good idea. You do not have to introduce yet
another flag and all AF_XDP users must load an XDP program anyway
to get any traffic up to the socket, so why not just say that the XDP
program decides if the AF_XDP socket should get multi-buffer packets
or not? The problem is that we can create an AF_XDP socket that is Tx
only and that works without having to load an XDP program at
all. Another problem is that the XDP program might change during the
execution, so we would have to check this for every single packet.

Here is the observed throughput when compared to a codebase without any
multi-buffer changes and measured with xdpsock for 64B packets.
Apparently ZC Tx takes a hit from explicit zero length descriptors
validation. Overall, in terms of ZC performance, there is a room for
improvement, but for now we think this work is in a good shape in terms
of correctness and functionality. We were targetting for up to 5%
overhead though. Note that ZC performance drops come from core + driver
support being combined, whereas copy mode had already driver support in
place.

Mode rxdrop l2fwd txonly
ice-zc -4% -7% -6%
i40e-zc -7% -6% -7%
drv -1.2% 0% +2%
skb -0.6% -1% +2%

Thank you,
Tirthendu, Magnus and Maciej
====================

Link: https://lore.kernel.org/r/20230719132421.584801-1-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path

In Tx path, xsk core reserves space for each desc to be transmitted in
the completion queue and it's address contained in i

xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path

In Tx path, xsk core reserves space for each desc to be transmitted in
the completion queue and it's address contained in it is stored in the
skb destructor arg. After successful transmission the skb destructor
submits the addr marking completion.

To handle multiple descriptors per packet, now along with reserving
space for each descriptor, the corresponding address is also stored in
completion queue. The number of pending descriptors are stored in skb
destructor arg and is used by the skb destructor to update completions.

Introduce 'skb' in xdp_sock to store a partially built packet when
__xsk_generic_xmit() must return before it sees the EOP descriptor for
the current packet so that packet building can resume in next call of
__xsk_generic_xmit().

Helper functions are introduced to set and get the pending descriptors
in the skb destructor arg. Also, wrappers are introduced for storing
descriptor addresses, submitting and cancelling (for unsuccessful
transmissions) the number of completions.

Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-7-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

xsk: introduce XSK_USE_SG bind flag for xsk socket

As of now xsk core drops any xdp_buff with data size greater than the
xsk frame_size as set by the af_xdp application. With multi-buffer
support in

xsk: introduce XSK_USE_SG bind flag for xsk socket

As of now xsk core drops any xdp_buff with data size greater than the
xsk frame_size as set by the af_xdp application. With multi-buffer
support introduced in the next patch xsk core can now split those
buffers into multiple descriptors provided the af_xdp application can
handle them. Such capability of the application needs to be independent
of the xdp_prog's frag support capability since there are cases where
even a single xdp_buffer may need to be split into multiple descriptors
owing to a smaller xsk frame size.

For e.g., with NIC rx_buffer size set to 4kB, a 3kB packet will
constitute of a single buffer and so will be sent as such to AF_XDP layer
irrespective of 'xdp.frags' capability of the XDP program. Now if the xsk
frame size is set to 2kB by the AF_XDP application, then the packet will
need to be split into 2 descriptors if AF_XDP application can handle
multi-buffer, else it needs to be dropped.

Applications can now advertise their frag handling capability to xsk core
so that xsk core can decide if it should drop or split xdp_buffs that
exceed xsk frame size. This is done using a new 'XSK_USE_SG' bind flag
for the xdp socket.

Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. In

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances

- Reduce compound page head access for zero-copy data transfers

- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible

- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance

- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking

- Add lockless accesses annotation to sk_err[_soft]

- Optimize again the skb struct layout

- Extends the skb drop reasons to make it usable by multiple
subsystems

- Better const qualifier awareness for socket casts

BPF:

- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses

- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward

- Add more precise memory usage reporting for all BPF map types

- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params

- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton

- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities

- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc

- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps

- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps

- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree

- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them

- Add ARM32 USDT support to libbpf

- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations

Protocols:

- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address

- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf

- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures

- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers

- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction

- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore

- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support

Netfilter:

- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged

- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support

- The iptables 32bit compat interface isn't compiled in by default
anymore

- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used

- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device

Driver API:

- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time

- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them

- Allow the page_pool to directly recycle the pages from safely
localized NAPI

- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization

- Add YNL support for user headers and struct attrs

- Add partial YNL specification for devlink

- Add partial YNL specification for ethtool

- Add tc-mqprio and tc-taprio support for preemptible traffic classes

- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device

- Add basic LED support for switch/phy

- Add NAPI documentation, stop relaying on external links

- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space

- Add transceiver support and improve the error messages for CAN-FD
controllers

New hardware / drivers:

- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY

- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997

- Can:
- STMicroelectronics bxcan stm32f429

Drivers:

- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP

- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame

- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates

- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E

- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware

- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets

- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)

- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility

- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...

show more ...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Andrii Nakryiko says:

====================
pull-request: bpf-next 2023-03-08

We've added 23 non-merge commits during the last 2 d

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Andrii Nakryiko says:

====================
pull-request: bpf-next 2023-03-08

We've added 23 non-merge commits during the last 2 day(s) which contain
a total of 28 files changed, 414 insertions(+), 104 deletions(-).

The main changes are:

1) Add more precise memory usage reporting for all BPF map types,
from Yafang Shao.

2) Add ARM32 USDT support to libbpf, from Puranjay Mohan.

3) Fix BTF_ID_LIST size causing problems in !CONFIG_DEBUG_INFO_BTF,
from Nathan Chancellor.

4) IMA selftests fix, from Roberto Sassu.

5) libbpf fix in APK support code, from Daniel Müller.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Fix IMA test
libbpf: USDT arm arg parsing support
libbpf: Refactor parse_usdt_arg() to re-use code
libbpf: Fix theoretical u32 underflow in find_cd() function
bpf: enforce all maps having memory usage callback
bpf: offload map memory usage
bpf, net: xskmap memory usage
bpf, net: sock_map memory usage
bpf, net: bpf_local_storage memory usage
bpf: local_storage memory usage
bpf: bpf_struct_ops memory usage
bpf: queue_stack_maps memory usage
bpf: devmap memory usage
bpf: cpumap memory usage
bpf: bloom_filter memory usage
bpf: ringbuf memory usage
bpf: reuseport_array memory usage
bpf: stackmap memory usage
bpf: arraymap memory usage
bpf: hashtab memory usage
...
====================

Link: https://lore.kernel.org/r/20230308193533.1671597-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'bpf: bpf memory usage'

Yafang Shao says:

====================

Currently we can't get bpf memory usage reliably either from memcg or
from bpftool.

In memcg, there's not a 'bpf' item

Merge branch 'bpf: bpf memory usage'

Yafang Shao says:

====================

Currently we can't get bpf memory usage reliably either from memcg or
from bpftool.

In memcg, there's not a 'bpf' item in memory.stat, but only 'kernel',
'sock', 'vmalloc' and 'percpu' which may related to bpf memory. With
these items we still can't get the bpf memory usage, because bpf memory
usage may far less than the kmem in a memcg, for example, the dentry may
consume lots of kmem.

bpftool now shows the bpf memory footprint, which is difference with bpf
memory usage. The difference can be quite great in some cases, for example,

- non-preallocated bpf map
The non-preallocated bpf map memory usage is dynamically changed. The
allocated elements count can be from 0 to the max entries. But the
memory footprint in bpftool only shows a fixed number.

- bpf metadata consumes more memory than bpf element
In some corner cases, the bpf metadata can consumes a lot more memory
than bpf element consumes. For example, it can happen when the element
size is quite small.

- some maps don't have key, value or max_entries
For example the key_size and value_size of ringbuf is 0, so its
memlock is always 0.

We need a way to show the bpf memory usage especially there will be more
and more bpf programs running on the production environment and thus the
bpf memory usage is not trivial.

This patchset introduces a new map ops ->map_mem_usage to calculate the
memory usage. Note that we don't intend to make the memory usage 100%
accurate, while our goal is to make sure there is only a small difference
between what bpftool reports and the real memory. That small difference
can be ignored compared to the total usage. That is enough to monitor
the bpf memory usage. For example, the user can rely on this value to
monitor the trend of bpf memory usage, compare the difference in bpf
memory usage between different bpf program versions, figure out which
maps consume large memory, and etc.

This patchset implements the bpf memory usage for all maps, and yet there's
still work to do. We don't want to introduce runtime overhead in the
element update and delete path, but we have to do it for some
non-preallocated maps,
- devmap, xskmap
When we update or delete an element, it will allocate or free memory.
In order to track this dynamic memory, we have to track the count in
element update and delete path.

- cpumap
The element size of each cpumap element is not determinated. If we
want to track the usage, we have to count the size of all elements in
the element update and delete path. So I just put it aside currently.

- local_storage, bpf_local_storage
When we attach or detach a cgroup, it will allocate or free memory. If
we want to track the dynamic memory, we also need to do something in
the update and delete path. So I just put it aside currently.

- offload map
The element update and delete of offload map is via the netdev dev_ops,
in which it may dynamically allocate or free memory, but this dynamic
memory isn't counted in offload map memory usage currently.

The result of each map can be found in the individual patch.

We may also need to track per-container bpf memory usage, that will be
addressed by a different patchset.

Changes:
v3->v4: code improvement on ringbuf (Andrii)
use READ_ONCE() to read lpm_trie (Tao)
explain why we can't get bpf memory usage from memcg.
v2->v3: check callback at map creation time and avoid warning (Alexei)
fix build error under CONFIG_BPF=n (lkp@intel.com)
v1->v2: calculate the memory usage within bpf (Alexei)
- [v1] bpf, mm: bpf memory usage
https://lwn.net/Articles/921991/
- [RFC PATCH v2] mm, bpf: Add BPF into /proc/meminfo
https://lwn.net/Articles/919848/
- [RFC PATCH v1] mm, bpf: Add BPF into /proc/meminfo
https://lwn.net/Articles/917647/
- [RFC PATCH] bpf, mm: Add a new item bpf into memory.stat
https://lore.kernel.org/bpf/20220921170002.29557-1-laoar.shao@gmail].com/
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

bpf, net: xskmap memory usage

A new helper is introduced to calculate xskmap memory usage.

The xfsmap memory usage can be dynamically changed when we add or remove
a xsk_map_node. Hence we need to

bpf, net: xskmap memory usage

A new helper is introduced to calculate xskmap memory usage.

The xfsmap memory usage can be dynamically changed when we add or remove
a xsk_map_node. Hence we need to track the count of xsk_map_node to get
its memory usage.

The result as follows,
- before
10: xskmap name count_map flags 0x0
key 4B value 4B max_entries 65536 memlock 524288B

- after
10: xskmap name count_map flags 0x0 <<< no elements case
key 4B value 4B max_entries 65536 memlock 524608B

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230305124615.12358-17-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'v5.18'

Linux 5.18

Merge branches 'fixes' and 'misc' into for-linus

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

Merge tag 'v5.17-rc4' into next

Sync up with mainline to get the latest changes in HID subsystem.

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...