Merge tag 'v6.6.66' into for/openbmc/dev-6.6

This is the 6.6.66 stable release

spi: spi-fsl-lpspi: Adjust type of scldiv

[ Upstream commit fa8ecda9876ac1e7b29257aa82af1fd0695496e2 ]

The target value of scldiv is just a byte, but its calculation in
fsl_lpspi_set_bitrate could

spi: spi-fsl-lpspi: Adjust type of scldiv

[ Upstream commit fa8ecda9876ac1e7b29257aa82af1fd0695496e2 ]

The target value of scldiv is just a byte, but its calculation in
fsl_lpspi_set_bitrate could be negative. So use an adequate type to store
the result and avoid overflows. After that this needs range check
adjustments, but this should make the code less opaque.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240930093056.93418-2-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq()

[ Upstream commit 003c7e01916c5e2af95add9b0cbda2e6163873e8 ]

disable_irq() after request_irq() still has a time gap in which
interrupts

spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq()

[ Upstream commit 003c7e01916c5e2af95add9b0cbda2e6163873e8 ]

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: 9728fb3ce117 ("spi: lpspi: disable lpspi module irq in DMA mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906022828.891812-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

spi: spi-fsl-lpspi: remove redundant spi_controller_put call

[ Upstream commit bff892acf79cec531da6cb21c50980a584ce1476 ]

devm_spi_alloc_controller will allocate an SPI controller and
automatically

spi: spi-fsl-lpspi: remove redundant spi_controller_put call

[ Upstream commit bff892acf79cec531da6cb21c50980a584ce1476 ]

devm_spi_alloc_controller will allocate an SPI controller and
automatically release a reference on it when dev is unbound from
its driver. It doesn't need to call spi_controller_put explicitly
to put the reference when lpspi driver failed initialization.

Fixes: 2ae0ab0143fc ("spi: lpspi: Avoid potential use-after-free in probe()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240403084029.2000544-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time

[ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ]

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont

spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time

[ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ]

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.

Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

spi: spi-fsl-lpspi: Fix off-by-one in prescale max

commit ff949d981c775332be94be70397ee1df20bc68e5 upstream.

The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn

spi: spi-fsl-lpspi: Fix off-by-one in prescale max

commit ff949d981c775332be94be70397ee1df20bc68e5 upstream.

The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.

Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register

[ Upstream commit 783bf5d09f86b9736605f3e01a3472e55ef98ff8 ]

Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE]
can only be conf

spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register

[ Upstream commit 783bf5d09f86b9736605f3e01a3472e55ef98ff8 ]

Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE]
can only be configured to be 0 or 1, other values are not valid
and will cause LPSPI to not work.

Add the prescale limitation for LPSPI in I.MX93. Other platforms
are not affected.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20240820070658.672127-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.46' into for/openbmc/dev-6.6

This is the 6.6.46 stable release

spi: spi-fsl-lpspi: Fix scldiv calculation

[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]

The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in

spi: spi-fsl-lpspi: Fix scldiv calculation

[ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ]

The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.

Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.

So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.

Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

spi: lpspi: Avoid potential use-after-free in probe()

[ Upstream commit 2ae0ab0143fcc06190713ed81a6486ed0ad3c861 ]

fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/sp

spi: lpspi: Avoid potential use-after-free in probe()

[ Upstream commit 2ae0ab0143fcc06190713ed81a6486ed0ad3c861 ]

fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
kernfs_find_ns
kernfs_find_and_get_ns
sysfs_remove_group
sysfs_remove_groups
device_remove_attrs
device_del
spi_unregister_controller
devm_spi_unregister
release_nodes
devres_release_all
really_probe
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork

Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240312112050.2503643-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative tha

Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:

- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.

- QuadSPI SPI support for Allwinner sun6i.

- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...

show more ...

spi: switch to use modern name (part2)

Merge series from Yang Yingliang <yangyingliang@huawei.com>:

I'm trying to rename the legacy name to modern name used in SPI drivers,
this is part2 patchset.

spi: switch to use modern name (part2)

Merge series from Yang Yingliang <yangyingliang@huawei.com>:

I'm trying to rename the legacy name to modern name used in SPI drivers,
this is part2 patchset.

After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy
named function devm_spi_alloc_master/spi_alloc_master() can be replaced.
And also change other legacy name master/slave to modern name host/target
or controller. All compile test passed.

Yang Yingliang (20):
spi: amlogic-spifc-a1: switch to use devm_spi_alloc_host()
spi: au1550: switch to use modern name
spi: ep93xx: switch to use modern name
spi: falcon: switch to use modern name
spi: fsi: switch to use spi_alloc_host()
spi: fsl-dspi: switch to use modern name
spi: fsl-espi: switch to use modern name
spi: fsl-lpspi: switch to use modern name
spi: fsl-qspi: switch to use modern name
spi: fsl-spi: switch to use modern name
spi: gpio: switch to use modern name
spi: gxp: switch to use modern name
spi: bcmbca-hsspi: switch to use modern name
spi: hisi-sfc-v3xx: switch to use modern name
spi: img-spfi: switch to use modern name
spi: imx: switch to use modern name
spi: ingenic: switch to use devm_spi_alloc_host()
spi: intel: switch to use modern name
spi: jcore: switch to use modern name
spi: lantiq: switch to use modern name

drivers/spi/spi-amlogic-spifc-a1.c | 2 +-
drivers/spi/spi-au1550.c | 74 ++++++------
drivers/spi/spi-bcmbca-hsspi.c | 66 +++++------
drivers/spi/spi-ep93xx.c | 174 ++++++++++++++---------------
drivers/spi/spi-falcon.c | 34 +++---
drivers/spi/spi-fsi.c | 2 +-
drivers/spi/spi-fsl-dspi.c | 24 ++--
drivers/spi/spi-fsl-espi.c | 76 ++++++-------
drivers/spi/spi-fsl-lpspi.c | 54 ++++-----
drivers/spi/spi-fsl-qspi.c | 10 +-
drivers/spi/spi-fsl-spi.c | 76 ++++++-------
drivers/spi/spi-gpio.c | 72 ++++++------
drivers/spi/spi-gxp.c | 6 +-
drivers/spi/spi-hisi-sfc-v3xx.c | 18 +--
drivers/spi/spi-img-spfi.c | 118 +++++++++----------
drivers/spi/spi-imx.c | 114 +++++++++----------
drivers/spi/spi-ingenic.c | 2 +-
drivers/spi/spi-intel.c | 42 +++----
drivers/spi/spi-jcore.c | 44 ++++----
drivers/spi/spi-lantiq-ssc.c | 96 ++++++++--------
20 files changed, 552 insertions(+), 552 deletions(-)

--
2.25.1

show more ...

spi: fsl-lpspi: switch to use modern name

Change legacy name master/target to modern name host/target

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://

spi: fsl-lpspi: switch to use modern name

Change legacy name master/target to modern name host/target

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230807124105.3429709-9-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

spi: spi-fsl-lpspi: Read chip-select amount from hardware for i.MX93

PARAM.PCSNUM register on i.MX93 indicates the number of supported
(hw) chip-selects. LPSPI4 has 3 while others have only 2.
Still

spi: spi-fsl-lpspi: Read chip-select amount from hardware for i.MX93

PARAM.PCSNUM register on i.MX93 indicates the number of supported
(hw) chip-selects. LPSPI4 has 3 while others have only 2.
Still allow overwriting from DT.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230717085934.409476-3-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: spi-fsl-lpspi: Move controller initialization further down

This is a preparation for reading number of chip-selects from hardware.
This needs IO resources mapped and peripheral clocking enabled

spi: spi-fsl-lpspi: Move controller initialization further down

This is a preparation for reading number of chip-selects from hardware.
This needs IO resources mapped and peripheral clocking enabled.
No functional changes intended.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230717085934.409476-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...