Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

spi: atmel-quadspi: Fix register name in verbose logging function

[ Upstream commit 2ac40e6d0ccdd93031f8b1af61b0fe5cdd704923 ]

`atmel_qspi_reg_name()` is used for pretty-printing register offsets
f

spi: atmel-quadspi: Fix register name in verbose logging function

[ Upstream commit 2ac40e6d0ccdd93031f8b1af61b0fe5cdd704923 ]

`atmel_qspi_reg_name()` is used for pretty-printing register offsets
for verbose logging of register accesses. However, due to a typo
(likely a copy-paste error), QSPI_RD's offset prints as "MR", the
name of the previous register. Fix this typo.

Fixes: c528ecfbef04 ("spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20241122141302.2599636-1-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

spi: atmel-quadspi: Fix wrong register value written to MR

commit 162d9b5d2308c7e48efbc97d36babbf4d73b2c61 upstream.

aq->mr should go to MR, nothing else.

Fixes: 329ca3eed4a9 ("spi: atmel-quadspi:

spi: atmel-quadspi: Fix wrong register value written to MR

commit 162d9b5d2308c7e48efbc97d36babbf4d73b2c61 upstream.

aq->mr should go to MR, nothing else.

Fixes: 329ca3eed4a9 ("spi: atmel-quadspi: Avoid overwriting delay register settings")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/linux-spi/20240926-macarena-wincing-7c4995487a29@thorsis.com/T/#u
Link: https://patch.msgid.link/20240926090356.105789-1-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

spi: atmel-quadspi: Avoid overwriting delay register settings

[ Upstream commit 329ca3eed4a9a161515a8714be6ba182321385c7 ]

Previously the MR and SCR registers were just set with the supposedly
requ

spi: atmel-quadspi: Avoid overwriting delay register settings

[ Upstream commit 329ca3eed4a9a161515a8714be6ba182321385c7 ]

Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).

All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.

Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

spi: atmel-quadspi: Undo runtime PM changes at driver exit time

[ Upstream commit 438efb23f9581659495b85f1f6c7d5946200660c ]

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont

spi: atmel-quadspi: Undo runtime PM changes at driver exit time

[ Upstream commit 438efb23f9581659495b85f1f6c7d5946200660c ]

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.44' into for/openbmc/dev-6.6

This is the 6.6.44 stable release

spi: atmel-quadspi: Add missing check for clk_prepare

[ Upstream commit ef901b38d3a4610c4067cd306c1a209f32e7ca31 ]

Add check for the return value of clk_prepare() and return the error if
it fails i

spi: atmel-quadspi: Add missing check for clk_prepare

[ Upstream commit ef901b38d3a4610c4067cd306c1a209f32e7ca31 ]

Add check for the return value of clk_prepare() and return the error if
it fails in order to catch the error.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://msgid.link/r/20240515084028.3210406-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API fo

Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.

There's also a new API to allow us to support TPM chips on half duplex
controllers.

Summary:

- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree

- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI

- Optimisation for large transfers on fsl-cpm devices

- Cleanups around device property use which fix some sisues with
fwnode

- Use of both void remove() and devm_platform_.*ioremap_resource()

- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"

* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

spi: atmel-quadspi: Convert to platform remove

Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:

This series converts the atmel-quadspi driver to use the .remove_new()
callback t

spi: atmel-quadspi: Convert to platform remove

Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:

This series converts the atmel-quadspi driver to use the .remove_new()
callback that doesn't return an int but void. The motivation is to not
give driver authors a reason to (wrongly) believe that returning an
error code was sensible error handling. In fact the spi core only emits
a warning message in this case and otherwise continues as if the return
value was zero. This usually yields resource leaks that sometimes can
lead to exceptions later on.

The atmel-quadspi driver is one of these drivers that got error handling
wrong, this is fixed here and in the last patch the driver is converted
to .remove_new() with the eventual goal to change .remove() to return
void once all drivers are converted this way.

show more ...

spi: atmel-quadspi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do

spi: atmel-quadspi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230317084232.142257-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()

An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with

spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()

An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with an unbound parent
and unmapped register space (because devm_ioremap_resource() is undone).
So using the remaining spi controller probably results in an oops.

Instead unregister the controller unconditionally and only skip hardware
access and clk disable.

Also add a warning about resume failing and return zero unconditionally.
The latter has the only effect to suppress a less helpful error message by
the spi core.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230317084232.142257-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...