Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"

commit b17155133391d7f6dd18d3fb94a7d492fdec18fa upstream.

The rpm_requests device nodes have the compatible node. As such the

Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"

commit b17155133391d7f6dd18d3fb94a7d492fdec18fa upstream.

The rpm_requests device nodes have the compatible node. As such the
rpmsg core uses OF modalias instead of a native rpmsg modalias. Thus if
smd-rpm is built as a module, it doesn't get autoloaded for the device.

Revert the commit bcabe1e09135 ("soc: qcom: smd-rpm: Match rpmsg channel
instead of compatible")

Fixes: bcabe1e09135 ("soc: qcom: smd-rpm: Match rpmsg channel instead of compatible")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-1-0776408a94c5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there a

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.

If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.

New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK

Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver

Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...

show more ...

Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/g

Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.

The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.

On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.

The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge branch 'clk-qcom' into clk-next

* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a

Merge branch 'clk-qcom' into clk-next

* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
...

show more ...

Merge tag 'icc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 6.6

This pull request contains the interconnect chan

Merge tag 'icc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 6.6

This pull request contains the interconnect changes for the 6.6-rc1 merge
window which is a mix of core and driver changes with the following highlights:

Core changes:
- New generic test client driver that allows issuing bandwidth requests
between endpoints via debugfs.
- Annotate all structs with flexible array members with the __counted_by
attribute.
- Introduce new icc_bw_lock for cases where we need to serialize bandwidth
aggregation and update to decouple that from paths that require memory
allocation.

Driver changes:
- Move the Qualcomm SMD RPM bus-clocks from CCF to interconnect framework
where they actually belong. This brings power management improvements
and reduces the overhead and layering. These changes are in immutable
branch that is being pulled also into the qcom tree.
- Fixes for QUP nodes on SM8250.
- Enable sync_state and keepalive for QCM2290.
- Enable sync_state for SM8450.
- Improve enable_mask-based BCMs handling and fix some bugs.
- Add compatible string for the OSM-L3 on SDM670.
- Add compatible strings for SC7180, SM8250 and SM6350 bandwidth monitors.
- Expand and retire the DEFINE_QNODE and DEFINE_QBCM macros, which have
become ugly beasts with many different arguments.

Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (64 commits)
interconnect: Add debugfs test client
interconnect: Reintroduce icc_get()
debugfs: Add write support to debugfs_create_str()
interconnect: qcom: icc-rpmh: Retire DEFINE_QBCM
interconnect: qcom: sm8350: Retire DEFINE_QBCM
interconnect: qcom: sm8250: Retire DEFINE_QBCM
interconnect: qcom: sm8150: Retire DEFINE_QBCM
interconnect: qcom: sm6350: Retire DEFINE_QBCM
interconnect: qcom: sdx65: Retire DEFINE_QBCM
interconnect: qcom: sdx55: Retire DEFINE_QBCM
interconnect: qcom: sdm845: Retire DEFINE_QBCM
interconnect: qcom: sdm670: Retire DEFINE_QBCM
interconnect: qcom: sc7180: Retire DEFINE_QBCM
interconnect: qcom: icc-rpmh: Retire DEFINE_QNODE
interconnect: qcom: sm8350: Retire DEFINE_QNODE
interconnect: qcom: sm8250: Retire DEFINE_QNODE
interconnect: qcom: sm8150: Retire DEFINE_QNODE
interconnect: qcom: sm6350: Retire DEFINE_QNODE
interconnect: qcom: sdx65: Retire DEFINE_QNODE
interconnect: qcom: sdx55: Retire DEFINE_QNODE
...

show more ...

Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support for the Global Clock Contr

Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support for the Global Clock Controller in IPQ5018 is added.
- The SMD RPM driver is cleaned up, with interconnect bus clocks moved
out to the interconnect drivers. Due to being tangled with the
related interconnect updates, the topic branch with interconnect
patches was merged in as well.
- Various bugs in PM runtime integration is fixes across many platforms.
- The MSM8996 core bus framework gains support for MSM8996 Pro.
- MDM9615 is transitioned to parent_hw and parent_data, with related
cleanups. With this the cxo proxy clock is dropped from the driver.
And LCC support for MDM9615 is merged into the MSM8960 driver, to
avoid duplication.
- Network-related resets are added on IPQ4019
- A couple of missing USB-related clocks are added for IPQ9574
- The missing gpll0_sleep_clk_src is added to MSM8917 global clock
controller
- A few minor fixes for MSM8998 global clock controller.
- In the QDU1000 global clock controller GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected.
- Missing GDSCs are added to SC8280XP global clock controller driver,
flags for existing GDSCs are corrected, by enabling retention and
dropping the always-on flags. Retention is also enabled for the
display clock controller GDSCs.
- SDCC apps_clk_src is marked CLK_OPS_PARENT_ENABLE to fix issues with
missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while
sm8450 is corrected to use floor ops.
- SM6350 GPU clock controller clock supplies are corrected.
- Unwanted clocks from the IPQ5332 GCC are dropped.
- The missing OXILICX GDSC is added to MSM8226 GCC.
- The delay in the reset controller is transitioned to fsleep() to
invoke the appropriate sleep method depending on duration.
- The SM83550 Video clock controller is extended to support SC8280XP.

* tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (86 commits)
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
...

show more ...

Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v6.6

Compatible and clock handling in the Qualcomm SCM dr

Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v6.6

Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.

An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.

The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.

In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.

The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.

The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.

PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.

An off-by-one string length check is corrected in the QMI encoder
decoder library.

The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.

The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.

The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.

Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().

The list of VMIDs defined for the SCM assign memory interface is
extended.

* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...

Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'qcom/20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git into icc-next

Merge the immutable branch from the qcom-tree,

Merge branch 'qcom/20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git into icc-next

Merge the immutable branch from the qcom-tree, to get the changes that
move the management of SMD RPM bus clocks to the interconnect framework.

* 20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org
dt-bindings: interconnect: Add Qcom RPM ICC bindings
soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM
soc: qcom: smd-rpm: Use tabs for defines
clk: qcom: smd-rpm: Move some RPM resources to the common header
soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
interconnect: qcom: icc-rpm: Introduce keep_alive
interconnect: qcom: Add missing headers in icc-rpm.h
interconnect: qcom: Fold smd-rpm.h into icc-rpm.h
interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code
interconnect: qcom: Define RPM bus clocks
interconnect: qcom: sdm660: Hook up RPM bus clk definitions
interconnect: qcom: msm8996: Hook up RPM bus clk definitions
interconnect: qcom: qcs404: Hook up RPM bus clk definitions
interconnect: qcom: msm8939: Hook up RPM bus clk definitions
interconnect: qcom: msm8916: Hook up RPM bus clk definitions
interconnect: qcom: qcm2290: Hook up RPM bus clk definitions
interconnect: qcom: icc-rpm: Control bus rpmcc from icc
clk: qcom: smd-rpm: Separate out interconnect bus clocks
interconnect: qcom: icc-rpm: Fix bucket number
interconnect: qcom: icc-rpm: Set bandwidth on both contexts
interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req
interconnect: qcom: icc-rpm: Fix bandwidth calculations

Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>

show more ...

Merge branch '20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' into clk-for-6.6

This series reshuffles things around, moving the management of SMD RPM
bus clocks to the interconnect framework wh

Merge branch '20230526-topic-smd_icc-v7-0-09c78c175546@linaro.org' into clk-for-6.6

This series reshuffles things around, moving the management of SMD RPM
bus clocks to the interconnect framework where they belong. This helps
us solve a couple of issues:

1. We can work towards unused clk cleanup of RPMCC without worrying
about it killing some NoC bus, resulting in the SoC dying.
Deasserting actually unused RPM clocks (among other things) will
let us achieve "true SoC-wide power collapse states", also known as
VDD_LOW and VDD_MIN.

2. We no longer have to keep tons of quirky bus clock ifs in the icc
driver. You either have a RPM clock and call "rpm set rate" or you
have a single non-RPM clock (like AHB_CLK_SRC) or you don't have any.

3. There's less overhead - instead of going through layers and layers of
the CCF, ratesetting comes down to calling max() and sending a single
RPM message. ICC is very very dynamic so that's a big plus.

The clocks still need to be vaguely described in the clk-smd-rpm driver,
as it gives them an initial kickoff, before actually telling RPM to
enable DVFS scaling. After RPM receives that command, all clocks that
have not been assigned a rate are considered unused and are shut down
in hardware, leading to the same issue as described in point 1.

We can consider marking them __initconst in the future, but this series
is very fat even without that..

Apart from that, it squashes a couple of bugs that really need fixing..

The series is merged through a topic branch to manage the dependencies
between interconnect, Qualcomm clocks and Qualcomm SoC.

show more ...

soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm

icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can onl

soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm

icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.

Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-5-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

soc: qcom: smd-rpm: Match rpmsg channel instead of compatible

There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keep

soc: qcom: smd-rpm: Match rpmsg channel instead of compatible

There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keeping
the current list around for backwards compatibility.

As an alternative, let's switch the driver to match the rpmsg_device_id
instead, which is always "rpm_requests" on all platforms. Add a check
to ensure that there is a device tree node defined for the device since
otherwise the of_platform_populate() call will operate on the root node (/).

Similar approaches with matching rpmsg_device_id are already used in
qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl.

Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 (G-Link)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-4-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon

Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.

Updates on other platforms include:

- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC

- Support for unidirectional mailbox channels in Arm SCMI firmware

- Support for per cpu asynchronous notification in OP-TEE firmware

- Minor updates for memory controller drivers.

- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"

* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...

show more ...