Revision tags: v5.4.56, v5.8, v5.7.12, v5.4.55 |
|
#
a3d8a257 |
| 31-Jul-2020 |
Damien Le Moal <damien.lemoal@wdc.com> |
scsi: sd_zbc: Improve zone revalidation
Currently, for zoned disks, since blk_revalidate_disk_zones() requires the disk capacity to be set already to operate correctly, zones revalidation can only b
scsi: sd_zbc: Improve zone revalidation
Currently, for zoned disks, since blk_revalidate_disk_zones() requires the disk capacity to be set already to operate correctly, zones revalidation can only be done on the second revalidate scan once the gendisk capacity is set at the end of the first scan. As a result, if zone revalidation fails, there is no second chance to recover from the failure and the disk capacity is changed to 0, with the disk left unusable.
This can be improved by shuffling around code, specifically, by moving the call to sd_zbc_revalidate_zones() from sd_zbc_read_zones() to the end of sd_revalidate_disk(), after set_capacity_revalidate_and_notify() is called to set the gendisk capacity. With this change, if sd_zbc_revalidate_zones() fails on the first scan, the second scan will call it again to recover, if possible.
Using the new struct scsi_disk fields rev_nr_zones and rev_zone_blocks, sd_zbc_revalidate_zones() does actual work only if it detects a change with the disk zone configuration. This means that for a successful zones revalidation on the first scan, the second scan will not cause another heavy full check.
While at it, remove the unecesary "extern" declaration of sd_zbc_read_zones().
Link: https://lore.kernel.org/r/20200731054928.668547-1-damien.lemoal@wdc.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
#
3b5d1afd |
| 03-Aug-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
|
Revision tags: v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9 |
|
#
ca0800a6 |
| 14-Jul-2020 |
YueHaibing <yuehaibing@huawei.com> |
scsi: sd_zbc: Remove unused inline functions
These are no longer used and can be removed.
Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.com Reviewed-by: Johannes Thumshir
scsi: sd_zbc: Remove unused inline functions
These are no longer used and can be removed.
Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.7.8, v5.4.51, v5.4.50, v5.7.7 |
|
#
98817a84 |
| 30-Jun-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix atomicity of affinity update in the G
Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix atomicity of affinity update in the GIC driver - Don't sleep in atomic when waiting for a GICv4.1 RD to respond - Fix a couple of typos in user-visible messages
show more ...
|
#
77346a70 |
| 30-Jun-2020 |
Joerg Roedel <jroedel@suse.de> |
Merge tag 'v5.8-rc3' into arm/qcom
Linux 5.8-rc3
|
#
60e9eabf |
| 29-Jun-2020 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.la
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
show more ...
|
#
0f69403d |
| 25-Jun-2020 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@inte
Merge drm/drm-next into drm-intel-next-queued
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
Revision tags: v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
6870112c |
| 17-Jun-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.8-rc1' into regulator-5.8
Linux 5.8-rc1
|
#
07c7b547 |
| 16-Jun-2020 |
Tony Lindgren <tony@atomide.com> |
Merge tag 'v5.8-rc1' into fixes
Linux 5.8-rc1
|
#
4b3c1f1b |
| 16-Jun-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge v5.8-rc1 into drm-misc-fixes
Beginning a new release cycles for what will become v5.8. Updating drm-misc-fixes accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
8440d4a7 |
| 12-Jun-2020 |
Rob Herring <robh@kernel.org> |
Merge branch 'dt/schema-cleanups' into dt/linus
|
#
f77d26a9 |
| 11-Jun-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'x86/entry' into ras/core
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow up patches can be applied without creating a horrible merge conflict afterwards.
|
Revision tags: v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44 |
|
#
750a02ab |
| 02-Jun-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release:
- Remove dead blk-thro
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
show more ...
|
Revision tags: v5.7, v5.4.43, v5.4.42, v5.4.41 |
|
#
5795eb44 |
| 12-May-2020 |
Johannes Thumshirn <johannes.thumshirn@wdc.com> |
scsi: sd_zbc: emulate ZONE_APPEND commands
Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) command with a start LBA set to the target zone write pointer position.
In order to always kn
scsi: sd_zbc: emulate ZONE_APPEND commands
Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) command with a start LBA set to the target zone write pointer position.
In order to always know the write pointer position of a sequential write zone, the write pointer of all zones is tracked using an array of 32bits zone write pointer offset attached to the scsi disk structure. Each entry of the array indicate a zone write pointer position relative to the zone start sector. The write pointer offsets are maintained in sync with the device as follows: 1) the write pointer offset of a zone is reset to 0 when a REQ_OP_ZONE_RESET command completes. 2) the write pointer offset of a zone is set to the zone size when a REQ_OP_ZONE_FINISH command completes. 3) the write pointer offset of a zone is incremented by the number of 512B sectors written when a write, write same or a zone append command completes. 4) the write pointer offset of all zones is reset to 0 when a REQ_OP_ZONE_RESET_ALL command completes.
Since the block layer does not write lock zones for zone append commands, to ensure a sequential ordering of the regular write commands used for the emulation, the target zone of a zone append command is locked when the function sd_zbc_prepare_zone_append() is called from sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained (e.g. a zone append is in-flight or a regular write has already locked the zone), the zone append command dispatching is delayed by returning BLK_STS_ZONE_RESOURCE.
To avoid the need for write locking all zones for REQ_OP_ZONE_RESET_ALL requests, use a spinlock to protect accesses and modifications of the zone write pointer offsets. This spinlock is initialized from sd_probe() using the new function sd_zbc_init().
Co-developed-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
show more ...
|
Revision tags: v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22 |
|
#
c95baf12 |
| 20-Feb-2020 |
Zhenyu Wang <zhenyuw@linux.intel.com> |
Merge drm-intel-next-queued into gvt-next
Backmerge to pull in https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
Revision tags: v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7 |
|
#
28336be5 |
| 30-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts
Conflicts: init/main.c lib/Kconfig.debug
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
b19efcab |
| 31-Jan-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.6 merge window.
|
#
1bdd3e05 |
| 10-Jan-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.5-rc5' into next
Sync up with mainline to get SPI "delay" API changes.
|
#
22164fbe |
| 06-Jan-2020 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Merge drm/drm-next into drm-misc-next
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
#
1e5f8a30 |
| 25-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.5-rc3' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v5.4.6, v5.4.5, v5.4.4 |
|
#
57e04eed |
| 17-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
perf top:
Arnaldo Carvalho de Melo:
- Do not
Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
perf top:
Arnaldo Carvalho de Melo:
- Do not bail out when perf_env__read_cpuid() returns ENOSYS, which has been reported happening on aarch64.
perf metricgroup:
Kajol Jain:
- Fix printing event names of metric group with multiple events
vendor events:
x86:
Ravi Bangoria:
- Fix Kernel_Utilization metric.
s390:
Ed Maste:
- Fix counter long description for DTLB1_GPAGE_WRITES and L1D_RO_EXCL_WRITES.
perf header:
Michael Petlan:
- Fix false warning when there are no duplicate cache entries
libtraceevent:
Sudip Mukherjee:
- Allow custom libdir path
API headers:
Arnaldo Carvalho de Melo:
- Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v5.4.3 |
|
#
761bfc33 |
| 11-Dec-2019 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf/urgent
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':
7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arche
Merge remote-tracking branch 'torvalds/master' into perf/urgent
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':
7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arches 1fd450f99272 libbpf: Fix up generation of bpf_helper_defs.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
#
023265ed |
| 11-Dec-2019 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Sync up with v5.5-rc1 to get the updated lock_release() API among other things. Fix the conflict reported by Stephen Rothwell [1].
[1] http://lore.kern
Merge drm/drm-next into drm-intel-next-queued
Sync up with v5.5-rc1 to get the updated lock_release() API among other things. Fix the conflict reported by Stephen Rothwell [1].
[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
#
2040cf9f |
| 10-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflicts
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
138f371d |
| 08-Dec-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
show more ...
|