Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
num

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.

In more detail:

- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)

- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)

- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)

- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)

- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.

This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.

Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

show more ...

scsi: sd: Do not issue commands to suspended disks on shutdown

If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver ma

scsi: sd: Do not issue commands to suspended disks on shutdown

If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.

Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().

Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'next' into for-linus

Prepare input updates for 6.2 merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'main' into zstd-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge tag 'v6.0' into rdma.git for-next

Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c
drivers/infini

Merge tag 'v6.0' into rdma.git for-next

Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c
drivers/infiniband/hw/hns/hns_roce_main.c

https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'v6.0-rc7'

Merge upstream to get RAPTORLAKE_S

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'irqchip-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull more irqchip fixes for 6.0 from Marc Zyngier:

- A couple of configuration f

Merge tag 'irqchip-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull more irqchip fixes for 6.0 from Marc Zyngier:

- A couple of configuration fixes for the recently merged Loongarch drivers

- A fix to avoid dynamic allocation of a cpumask which was causing issues
with PREEMPT_RT and the GICv3 ITS

- A tightening of an error check in the stm32 exti driver

Link: https://lore.kernel.org/r/20220916085158.2592518-1-maz@kernel.org

show more ...

Merge branch 'for-6.0-fixes' into for-6.1

for-6.0 has the following fix for cgroup_get_from_id().

836ac87d ("cgroup: fix cgroup_get_from_id")

which conflicts with the following two commits in fo

Merge branch 'for-6.0-fixes' into for-6.1

for-6.0 has the following fix for cgroup_get_from_id().

836ac87d ("cgroup: fix cgroup_get_from_id")

which conflicts with the following two commits in for-6.1.

4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")

While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.

Signed-off-by: Tejun Heo <tj@kernel.org>

show more ...

Merge branch 'for-linus' into for-next

Merge tag 'asoc-fix-v6.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.0

A few device specific fixes, nothing too large, and a new device
I

Merge tag 'asoc-fix-v6.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.0

A few device specific fixes, nothing too large, and a new device
ID for a Dell laptop.

show more ...

Merge tag 'v6.0-rc5' into i2c/for-mergewindow

Linux 6.0-rc5

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

MediaTek Helio X10 MT6795 - MT6331/6332 Regulators

Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:

In an effort to give some love to the apparently forgotten

MediaTek Helio X10 MT6795 - MT6331/6332 Regulators

Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:

In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.

This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.

Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.

Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.

show more ...

ASoC: Merge tag 'v6.0-rc4' into asoc-6.1

Linux 6.0-rc4 so we can test on BeagleBone again.

Merge 6.0-rc5 into driver-core-next

We need the driver core and debugfs changes in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.0-rc4 into usb-next

We need the USB fixes in here and this resolves the merge issue in:
drivers/usb/dwc3/gadget.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg K

Merge 6.0-rc4 into usb-next

We need the USB fixes in here and this resolves the merge issue in:
drivers/usb/dwc3/gadget.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...