Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
executio

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
execution guests

- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly

- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present

- Fix DCSS block device driver list corruption, caused by incorrect
error handling

- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking

- Cleanups, improvements, and minor fixes to the kernel mapping setup

- Fix various virtual vs physical address confusions

- Move pfault code to separate file, since it has nothing to do with
regular fault handling

- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already

- Add HAVE_FUNCTION_GRAPH_RETVAL support

- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future

- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver

- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space

- Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...

show more ...

s390/mm: remove redundant check against VMEM_MAX_PHYS

The value of ident_map_size could never exceed the value of
vmemmap as secured by setup_kernel_memory_layout() function:

/* make sure identity

s390/mm: remove redundant check against VMEM_MAX_PHYS

The value of ident_map_size could never exceed the value of
vmemmap as secured by setup_kernel_memory_layout() function:

/* make sure identity map doesn't overlay with vmemmap */
ident_map_size = min(ident_map_size, vmemmap_start);

Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added
range is checked against ident_map_size in add_memory_merged()
function anyway, the check against VMEM_MAX_PHYS is redundant.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"

This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d.

The assumption VMEM_MAX_PHYS should match ident_map_size
is wrong. At least discontigu

Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"

This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d.

The assumption VMEM_MAX_PHYS should match ident_map_size
is wrong. At least discontiguous saved segments (DCSS)
could be loaded at addresses beyond ident_map_size and
dcssblk device driver might fail as result.

Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

s390/mm: get rid of VMEM_MAX_PHYS macro

VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
mea

s390/mm: get rid of VMEM_MAX_PHYS macro

VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
meaning. However, unlike ident_map_size it is not
adjusted against various limiting factors (see the
comment to setup_ident_map_size() function). That
renders all checks against VMEM_MAX_PHYS invalid.

Further, VMEM_MAX_PHYS is currently set to vmemmap,
which is an address in virtual memory space. However,
it gets compared against physical addresses in various
locations. That works, because both address spaces
are the same on s390, but otherwise it is wrong.

Instead of fixing VMEM_MAX_PHYS misuse and semantics
just remove it.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%

- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

- Improve KASLR to also randomize module and special amode31 code base
load addresses

- Rework decompressor memory tracking to support memory holes and
improve error handling

- Add support for protected virtualization AP binding

- Add support for set_direct_map() calls

- Implement set_memory_rox() and noexec module_alloc()

- Remove obsolete overriding of mem*() functions for KASAN

- Rework kexec/kdump to avoid using nodat_stack to call purgatory

- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array

- Clean up uaccess inline asm

- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B

- Resolve last_break in userspace fault reports

- Simplify one-level sysctl registration

- Clean up branch prediction handling

- Rework CPU counter facility to retrieve available counter sets just
once

- Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...

show more ...

s390/sclp: replace zero-length array with flexible-array member

There are numerous patches which convert zero-length arrays with a
flexible-array member. Convert the remaining s390 occurrences.

Sug

s390/sclp: replace zero-length array with flexible-array member

There are numerous patches which convert zero-length arrays with a
flexible-array member. Convert the remaining s390 occurrences.

Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://github.com/KSPP/linux/issues/78
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...