Merge tag 'v6.6.66' into for/openbmc/dev-6.6

This is the 6.6.66 stable release

PCI: Add 'reset_subordinate' to reset hierarchy below bridge

[ Upstream commit 2fa046449a82a7d0f6d9721dd83e348816038444 ]

The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary

PCI: Add 'reset_subordinate' to reset hierarchy below bridge

[ Upstream commit 2fa046449a82a7d0f6d9721dd83e348816038444 ]

The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary
Bus Reset on the bridge leading to the device. These only work if the
device is the only device below the bridge.

Add a sysfs 'reset_subordinate' attribute on bridges that can assert
Secondary Bus Reset regardless of how many devices are below the bridge.

This resets all the devices below a bridge in a single command, including
the locking and config space save/restore that reset methods normally do.

This may be the only way to reset devices that don't support other reset
methods (ACPI, FLR, PM reset, etc).

Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

PCI: Add T_PVPERL macro

[ Upstream commit 164f66be0c2523e65df41b755c41b7c9ff58035a ]

According to the PCIe CEM r5.0, sec 2.9.2, Power stable to PERST#
inactive interval is 100 ms as minimum. Add a

PCI: Add T_PVPERL macro

[ Upstream commit 164f66be0c2523e65df41b755c41b7c9ff58035a ]

According to the PCIe CEM r5.0, sec 2.9.2, Power stable to PERST#
inactive interval is 100 ms as minimum. Add a macro so that the PCIe
controller drivers can make use of it.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Stable-dep-of: 22a9120479a4 ("PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

PCI: Use an error code with PCIe failed link retraining

commit 59100eb248c0b15585affa546c7f6834b30eb5a4 upstream.

Given how the call place in pcie_wait_for_link_delay() got structured now,
and that

PCI: Use an error code with PCIe failed link retraining

commit 59100eb248c0b15585affa546c7f6834b30eb5a4 upstream.

Given how the call place in pcie_wait_for_link_delay() got structured now,
and that pcie_retrain_link() returns a potentially useful error code,
convert pcie_failed_link_retrain() to return an error code rather than a
boolean status, fixing handling at the call site mentioned. Update the
other call site accordingly.

Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.29' into dev-6.6

This is the 6.6.29 stable release

PCI/ASPM: Fix deadlock when enabling ASPM

commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.

A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe

PCI/ASPM: Fix deadlock when enabling ASPM

commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.

A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:

============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc

but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc

other info that might help us debug this:
Possible unsafe locking scenario:

CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);

*** DEADLOCK ***

Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]

The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.

Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.

Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
[bhelgaas: backported to v6.6.y, which contains 8cc22ba3f77c ("Revert
"PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of
f93e71aea6c6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk
that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf
("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not
present in v6.6.28.]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

PCI: Make pci_dev_is_disconnected() helper public for other drivers

[ Upstream commit 39714fd73c6b60a8d27bcc5b431afb0828bf4434 ]

Make pci_dev_is_disconnected() public so that it can be called from

PCI: Make pci_dev_is_disconnected() helper public for other drivers

[ Upstream commit 39714fd73c6b60a8d27bcc5b431afb0828bf4434 ]

Make pci_dev_is_disconnected() public so that it can be called from
Intel VT-d driver to quickly fix/workaround the surprise removal
unplug hang issue for those ATS capable devices on PCIe switch downstream
hotplug capable ports.

Beside pci_device_is_present() function, this one has no config space
space access, so is light enough to optimize the normal pure surprise
removal and safe removal flow.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

Merge tag 'v6.6.11' into dev-6.6

This is the 6.6.11 stable release

PCI: Fix 64GT/s effective data rate calculation

[ Upstream commit ac4f1897fa5433a1b07a625503a91b6aa9d7e643 ]

Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PC

PCI: Fix 64GT/s effective data rate calculation

[ Upstream commit ac4f1897fa5433a1b07a625503a91b6aa9d7e643 ]

Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1). Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.

Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"

commit f93e71aea6c60ebff8adbd8941e678302d377869 upstream.

This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c.

Michael reported that

Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"

commit f93e71aea6c60ebff8adbd8941e678302d377869 upstream.

This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c.

Michael reported that when attempting to resume from suspend to RAM on ASUS
mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426
("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay
with no output, followed by a reboot.

Workarounds include:

- Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
- Booting with "pcie_aspm=off"
- Booting with "pcie_aspm.policy=performance"
- "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm"
before suspending
- Connecting a USB flash drive

Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org
Fixes: 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
Reported-by: Michael Schaller <michael@5challer.de>
Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Regist

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn

Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()

Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state

Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs

Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core

VGA:
- Simplify and clean up typos in VGA arbiter

Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use

Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties

Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it

Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload

Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset

Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled

Marvell MVEBU PCIe controller driver:
- Remove unused busn member

Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them

Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled

NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors

Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support

Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits

SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts

Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off

MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices

Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"

* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...

show more ...

Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
"DT core:

- Add support for generating DT nodes for PCI devi

Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
"DT core:

- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.

- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.

- Refactor node and property manipulation functions to better share
code with old API and changeset API

- Refactor changeset print functions to a common implementation

- Move some platform_device specific functions into of_platform.c

Bindings:

- Treewide fixing of typos

- Treewide clean-up of SPDX tags to use 'OR' consistently

- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.

- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format

- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings

- Fixes for Rockchip DWC PCI binding

- Ensure all properties are evaluated on USB connector schema

- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"

* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge branch 'pci/misc'

- Reorder struct pci_dev to avoid holes and reduce size (Christophe
JAILLET)

- Change pdev->rom_attr_enabled to single bit since it's only a boolean
value (Christophe JA

Merge branch 'pci/misc'

- Reorder struct pci_dev to avoid holes and reduce size (Christophe
JAILLET)

- Change pdev->rom_attr_enabled to single bit since it's only a boolean
value (Christophe JAILLET)

- Use struct_size() in pirq_convert_irt_table() instead of hand-writing it
(Christophe JAILLET)

- Explicitly include correct DT includes to untangle headers (Rob Herring)

- Fix a DOE race between destroy_work_on_stack() and the stack-allocated
task->work struct going out of scope in pci_doe() (Ira Weiny)

- Use pci_dev_id() when possible instead of manually composing ID from
dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai)

- Move pci_create_resource_files() declarations to linux/pci.h for alpha
build warnings (Arnd Bergmann)

- Remove unused hotplug function declarations (Yue Haibing)

- Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár)

- Unexport pcie_port_bus_type (Bjorn Helgaas)

- Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas)

- Fix BAR value printk formatting to accommodate 32-bit values (Bjorn
Helgaas)

- Use consistent pointer types for config access syscall get_user() and
put_user() uses (Bjorn Helgaas)

- Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas)

- Simplify pci_pio_to_address() (Bjorn Helgaas)

- Simplify pci_dev_driver() (Bjorn Helgaas)

- Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas)

- Fix code and doc typos and code formatting (Bjorn Helgaas)

- Tidy config space save/restore messages (Bjorn Helgaas)

* pci/misc:
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
PCI: Simplify pci_pio_to_address()
PCI/AER: Simplify AER_RECOVER_RING_SIZE definition
PCI: Use consistent put_user() pointer types
PCI: Fix printk field formatting
PCI: Remove unnecessary initializations
PCI: Unexport pcie_port_bus_type
PCI: mvebu: Remove unused busn member
PCI: Remove unused function declarations
PCI/sysfs: Move declarations to linux/pci.h
PCI/P2PDMA: Use pci_dev_id() to simplify the code
PCI/IOV: Use pci_dev_id() to simplify the code
PCI/AER: Use pci_dev_id() to simplify the code
PCI: apple: Use pci_dev_id() to simplify the code
PCI/DOE: Fix destroy_work_on_stack() race
PCI: Explicitly include correct DT includes
x86/PCI: Use struct_size() in pirq_convert_irt_table()
PCI: Change pdev->rom_attr_enabled to single bit
PCI: Reorder pci_dev fields to reduce holes

show more ...

Merge branch 'pci/controller/dwc'

- Add an imx6 .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload (Mark Brown)

- Add PCIE_PME_TO_L2_TIMEOUT_US va

Merge branch 'pci/controller/dwc'

- Add an imx6 .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload (Mark Brown)

- Add PCIE_PME_TO_L2_TIMEOUT_US value for controller drivers that need to
manually synchronize power removal (Frank Li)

- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver suspend/resume
ops, and a controller callback to send PME_Turn_Off (Frank Li)

- Add layerscape suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake (Hou Zhiqiang, Frank Li)

* pci/controller/dwc:
PCI: layerscape: Add power management support for ls1028a
PCI: dwc: Implement generic suspend/resume functionality
PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value
PCI: dwc: Provide deinit callback for i.MX

show more ...

PCI: Fix code formatting inconsistencies

Remove unnecessary "return;" in void functions and format consistently.
No functional change intended.

Link: https://lore.kernel.org/r/20230824193712.542167

PCI: Fix code formatting inconsistencies

Remove unnecessary "return;" in void functions and format consistently.
No functional change intended.

Link: https://lore.kernel.org/r/20230824193712.542167-12-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

show more ...

PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value

Add the PCIE_PME_TO_L2_TIMEOUT_US macro to define the L2 ready timeout
as described in the PCI specifications.

Link: https://lore.kernel.or

PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value

Add the PCIE_PME_TO_L2_TIMEOUT_US macro to define the L2 ready timeout
as described in the PCI specifications.

Link: https://lore.kernel.org/r/20230821184815.2167131-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>

show more ...

PCI: Create device tree node for bridge

The PCI endpoint device such as Xilinx Alveo PCI card maps the register
spaces from multiple hardware peripherals to its PCI BAR. Normally,
the PCI core disco

PCI: Create device tree node for bridge

The PCI endpoint device such as Xilinx Alveo PCI card maps the register
spaces from multiple hardware peripherals to its PCI BAR. Normally,
the PCI core discovers devices and BARs using the PCI enumeration process.
There is no infrastructure to discover the hardware peripherals that are
present in a PCI device, and which can be accessed through the PCI BARs.

Apparently, the device tree framework requires a device tree node for the
PCI device. Thus, it can generate the device tree nodes for hardware
peripherals underneath. Because PCI is self discoverable bus, there might
not be a device tree node created for PCI devices. Furthermore, if the PCI
device is hot pluggable, when it is plugged in, the device tree nodes for
its parent bridges are required. Add support to generate device tree node
for PCI bridges.

Add an of_pci_make_dev_node() interface that can be used to create device
tree node for PCI devices.

Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on,
the kernel will generate device tree nodes for PCI bridges unconditionally.

Initially, add the basic properties for the dynamically generated device
tree nodes which include #address-cells, #size-cells, device_type,
compatible, ranges, reg.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...