Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling

[ Upstream commit 039741a8d7c9a01c1bc84a5ac5aa770a5e138a30 ]

The MDIO_WT_DONE() macro tests bit 31, which is always 0 (== done) as
readw_poll

PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling

[ Upstream commit 039741a8d7c9a01c1bc84a5ac5aa770a5e138a30 ]

The MDIO_WT_DONE() macro tests bit 31, which is always 0 (== done) as
readw_poll_timeout_atomic() does a 16-bit read. Replace with the readl
variant.

[kwilczynski: commit log]
Fixes: ca5dcc76314d ("PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()")
Link: https://lore.kernel.org/linux-pci/20240217133722.14391-1-wahrenst@gmx.net
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Regist

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn

Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()

Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state

Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs

Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core

VGA:
- Simplify and clean up typos in VGA arbiter

Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use

Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties

Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it

Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload

Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset

Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled

Marvell MVEBU PCIe controller driver:
- Remove unused busn member

Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them

Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled

NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors

Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support

Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits

SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts

Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off

MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices

Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"

* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...

show more ...

Merge branch 'pci/controller/brcmstb'

- Assert PERST# when probing BCM2711 because some bootloaders don't do it
(Jim Quinlan)

* pci/controller/brcmstb:
PCI: brcmstb: Remove stale comment
PCI:

Merge branch 'pci/controller/brcmstb'

- Assert PERST# when probing BCM2711 because some bootloaders don't do it
(Jim Quinlan)

* pci/controller/brcmstb:
PCI: brcmstb: Remove stale comment
PCI: brcmstb: Assert PERST# on BCM2711

show more ...

PCI: brcmstb: Remove stale comment

A comment says that Multi-MSI is not supported by the driver.
A past commit [1] added this feature, so the comment is
incorrect and is removed.

[1] commit 198acab

PCI: brcmstb: Remove stale comment

A comment says that Multi-MSI is not supported by the driver.
A past commit [1] added this feature, so the comment is
incorrect and is removed.

[1] commit 198acab1772f22f2 ("PCI: brcmstb: Enable Multi-MSI")

Link: https://lore.kernel.org/r/20230623144100.34196-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

PCI: brcmstb: Assert PERST# on BCM2711

The current PCIe driver assumes PERST# is asserted when probe() is invoked.
Some older versions of the 2711/RPi bootloader left PERST# unasserted, as
the Raspi

PCI: brcmstb: Assert PERST# on BCM2711

The current PCIe driver assumes PERST# is asserted when probe() is invoked.
Some older versions of the 2711/RPi bootloader left PERST# unasserted, as
the Raspian OS does assert PERST# on probe(). For this reason, we assert
PERST# for BCM2711 SOCs (i.e. RPi).

Link: https://lore.kernel.org/r/20230623144100.34196-5-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Export pcie_retrain_link() for use outside ASPM

-

Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Export pcie_retrain_link() for use outside ASPM

- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up

- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates

Resource management:

- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly

Hotplug:

- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely

- Reassign bridge resources if necessary for ACPI hotplug

Driver binding:

- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int

Power management:

- Reduce wait time for secondary bus to be ready to speed up resume

- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold

- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume

Virtualization:

- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted

- Add function 1 DMA alias quirk for Marvell 88SE9235

Error handling:

- Unexport pci_save_aer_state() since it's only used in drivers/pci/

- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices

ASPM:

- Disable ASPM on MFD function removal to avoid use-after-free

- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify

- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason

Endpoint framework:

- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"

- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues

- Fix many EPC test issues

- Return pci_epf_type_add_cfs() error if EPF has no driver

- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters

- Pass EPF device ID to driver probe functions

- Return -EALREADY if EPC has already been started/stopped

- Add linkdown notifier support and use it in qcom-ep

- Add Bus Master Enable event support and use it in qcom-ep

- Add Qualcomm Modem Host Interface (MHI) endpoint driver

- Add Layerscape PME interrupt handling to manage link-up
notification

Cadence PCIe controller driver:

- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode

Faraday FTPC100 PCI controller driver:

- Release clock resources on error paths

Freescale i.MX6 PCIe controller driver:

- Save and restore Root Port MSI control to work around hardware defect

Intel VMD host bridge driver:

- Reset VMD config register between soft reboots

- Capture pci_reset_bus() return value instead of printing junk when
it fails

Qualcomm PCIe controller driver:

- Add SDX65 endpoint compatible string to DT binding

- Disable register write access after init for IP v2.3.3, v2.9.0

- Use DWC helpers for enabling/disabling writes to DBI registers

- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0

- Reuse v2.3.2 post-init sequence for v2.4.0

Renesas R-Car PCIe controller driver:

- Remove unused static pcie_base and pcie_dev

Rockchip PCIe controller driver:

- Remove writes to unused registers

- Write endpoint Device ID using correct register

- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages

- Poll waiting for PHY PLLs to lock

- Update RK3399 example DT binding to be valid

- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message

- Use multiple windows to avoid address translation conflicts

- Use u32 (not u16) when accessing 32-bit registers

- Hide MSI-X Capability, since RK3399 can't generate MSI-X

- Set endpoint controller required alignment to 256

Synopsys DesignWare PCIe controller driver:

- Wait for link to come up only if we've initiated link training

Miscellaneous:

- Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...

show more ...

Merge branch 'pci/controller/remove-void-callbacks'

- Convert platform_device .remove() callbacks to return void instead of a
mostly useless int (Uwe Kleine-König)

* pci/controller/remove-void-ca

Merge branch 'pci/controller/remove-void-callbacks'

- Convert platform_device .remove() callbacks to return void instead of a
mostly useless int (Uwe Kleine-König)

* pci/controller/remove-void-callbacks:
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void

show more ...

PCI: brcmstb: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error

PCI: brcmstb: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Link: https://lore.kernel.org/linux-pci/20230321193208.366561-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-fixes into drm-misc-fixes

Let's start the fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type propert

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>