Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side a

Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side as the upstream stable
branches cherry-picked a small number of changes out of a much large
series, which has already been backported.

show more ...

wifi: ath12k: fix tx power, max reg power update to firmware

[ Upstream commit 3540bba855b4b422e8b977d11aa8173ccb4f089d ]

Currently, when the vdev start WMI cmd is sent from host, vdev related
para

wifi: ath12k: fix tx power, max reg power update to firmware

[ Upstream commit 3540bba855b4b422e8b977d11aa8173ccb4f089d ]

Currently, when the vdev start WMI cmd is sent from host, vdev related
parameters such as max_reg_power, max_power, and max_antenna_gain are
multiplied by 2 before being sent to the firmware. This is incorrect
because the firmware uses 1 dBm steps for power calculations.

This leads to incorrect power values being used in the firmware and
radio, potentially causing incorrect behavior.

Fix the update of max_reg_power, max_power, and max_antenna_gain values
in the ath12k_mac_vdev_start_restart function, ensuring accurate
power settings in the firmware by sending these values as-is,
without multiplication.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Santhosh Ramesh <quic_santrame@quicinc.com>
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240909073049.3423035-1-quic_santrame@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.70' into for/openbmc/dev-6.6

This is the 6.6.70 stable release

Conflicts:
include/linux/usb/chipidea.h

Conflict was a trivial addition.

Signed-off-by: Andrew Jeffery <andrew@c

Merge tag 'v6.6.70' into for/openbmc/dev-6.6

This is the 6.6.70 stable release

Conflicts:
include/linux/usb/chipidea.h

Conflict was a trivial addition.

Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

show more ...

wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()

[ Upstream commit 8fac3266c68a8e647240b8ac8d0b82f1821edf85 ]

When I try to manually set bitrates:

iw wlan0 set bitrates legacy-2.

wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()

[ Upstream commit 8fac3266c68a8e647240b8ac8d0b82f1821edf85 ]

When I try to manually set bitrates:

iw wlan0 set bitrates legacy-2.4 1

I get sleeping from invalid context error, see below. Fix that by switching to
use recently introduced ieee80211_iterate_stations_mtx().

Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware
even supports bitrate WMI commands and should we consider disabling
ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch.

BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
3 locks held by iw/2236:
#0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40
#1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211]
#2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211]
CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
<TASK>
dump_stack_lvl+0xa4/0xe0
dump_stack+0x10/0x20
__might_resched+0x363/0x5a0
? __alloc_skb+0x165/0x340
__might_sleep+0xad/0x160
ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k]
? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k]
? __netdev_alloc_skb+0x45/0x7b0
? __asan_memset+0x39/0x40
? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k]
? reacquire_held_locks+0x4d0/0x4d0
ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k]
ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k]
? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k]
ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211]
ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k]
? ath12k_mac_vif_chan+0x320/0x320 [ath12k]
drv_set_bitrate_mask+0x267/0x470 [mac80211]
ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211]
? __this_cpu_preempt_check+0x13/0x20
nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211]
? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211]
? trace_contention_end+0xef/0x140
? rtnl_unlock+0x9/0x10
? nl80211_pre_doit+0x557/0x800 [cfg80211]
genl_family_rcv_msg_doit+0x1f0/0x2e0
? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250
? ns_capable+0x57/0xd0
genl_family_rcv_msg+0x34c/0x600
? genl_family_rcv_msg_dumpit+0x310/0x310
? __lock_acquire+0xc62/0x1de0
? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211]
? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211]
? cfg80211_external_auth_request+0x690/0x690 [cfg80211]
genl_rcv_msg+0xa0/0x130
netlink_rcv_skb+0x14c/0x400
? genl_family_rcv_msg+0x600/0x600
? netlink_ack+0xd70/0xd70
? rwsem_optimistic_spin+0x4f0/0x4f0
? genl_rcv+0x14/0x40
? down_read_killable+0x580/0x580
? netlink_deliver_tap+0x13e/0x350
? __this_cpu_preempt_check+0x13/0x20
genl_rcv+0x23/0x40
netlink_unicast+0x45e/0x790
? netlink_attachskb+0x7f0/0x7f0
netlink_sendmsg+0x7eb/0xdb0
? netlink_unicast+0x790/0x790
? __this_cpu_preempt_check+0x13/0x20
? selinux_socket_sendmsg+0x31/0x40
? netlink_unicast+0x790/0x790
__sock_sendmsg+0xc9/0x160
____sys_sendmsg+0x620/0x990
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x410/0x410
? __kasan_check_read+0x11/0x20
? mark_lock+0xe6/0x1470
___sys_sendmsg+0xe9/0x170
? copy_msghdr_from_user+0x120/0x120
? __lock_acquire+0xc62/0x1de0
? do_fault_around+0x2c6/0x4e0
? do_user_addr_fault+0x8c1/0xde0
? reacquire_held_locks+0x220/0x4d0
? do_user_addr_fault+0x8c1/0xde0
? __kasan_check_read+0x11/0x20
? __fdget+0x4e/0x1d0
? sockfd_lookup_light+0x1a/0x170
__sys_sendmsg+0xd2/0x180
? __sys_sendmsg_sock+0x20/0x20
? reacquire_held_locks+0x4d0/0x4d0
? debug_smp_processor_id+0x17/0x20
__x64_sys_sendmsg+0x72/0xb0
? lockdep_hardirqs_on+0x7d/0x100
x64_sys_call+0x894/0x9f0
do_syscall_64+0x64/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f230fe04807
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffe996a7ea8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000556f9f9c3390 RCX: 00007f230fe04807
RDX: 0000000000000000 RSI: 00007ffe996a7ee0 RDI: 0000000000000003
RBP: 0000556f9f9c88c0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000556f965ca190 R11: 0000000000000246 R12: 0000556f9f9c8780
R13: 00007ffe996a7ee0 R14: 0000556f9f9c87d0 R15: 0000556f9f9c88c0
</TASK>

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath12k: Optimize the mac80211 hw data access

[ Upstream commit 842addae02089fce4731be1c8d7d539449d4d009 ]

Currently mac80211 hw data is accessed by convert the hw to radio (ar)
structure and

wifi: ath12k: Optimize the mac80211 hw data access

[ Upstream commit 842addae02089fce4731be1c8d7d539449d4d009 ]

Currently mac80211 hw data is accessed by convert the hw to radio (ar)
structure and then radio to hw structure which is not necessary in some
places where mac80211 hw data is already present. So in that kind of
places avoid the conversion and directly access the mac80211 hw data.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231120235812.2602198-2-quic_periyasa@quicinc.com
Stable-dep-of: 8fac3266c68a ("wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

wifi: ath12k: Skip Rx TID cleanup for self peer

[ Upstream commit 1a0c640ce1cdcde3eb131a0c1e70ca1ed7cf27cb ]

During peer create, dp setup for the peer is done where Rx TID is
updated for all the TI

wifi: ath12k: Skip Rx TID cleanup for self peer

[ Upstream commit 1a0c640ce1cdcde3eb131a0c1e70ca1ed7cf27cb ]

During peer create, dp setup for the peer is done where Rx TID is
updated for all the TIDs. Peer object for self peer will not go through
dp setup.

When core halts, dp cleanup is done for all the peers. While cleanup,
rx_tid::ab is accessed which causes below stack trace for self peer.

WARNING: CPU: 6 PID: 12297 at drivers/net/wireless/ath/ath12k/dp_rx.c:851
Call Trace:
__warn+0x7b/0x1a0
ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
report_bug+0x10b/0x200
handle_bug+0x3f/0x70
exc_invalid_op+0x13/0x60
asm_exc_invalid_op+0x16/0x20
ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
ath12k_dp_rx_frags_cleanup+0xca/0xe0 [ath12k]
ath12k_dp_rx_peer_tid_cleanup+0x39/0xa0 [ath12k]
ath12k_mac_peer_cleanup_all+0x61/0x100 [ath12k]
ath12k_core_halt+0x3b/0x100 [ath12k]
ath12k_core_reset+0x494/0x4c0 [ath12k]

sta object in peer will be updated when remote peer is created. Hence
use peer::sta to detect the self peer and skip the cleanup.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240905042851.2282306-1-quic_rgnanase@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

wifi: ath12k: fix invalid AMPDU factor calculation in ath12k_peer_assoc_h_he()

[ Upstream commit a66de2d0f22b1740f3f9777776ad98c4bee62dff ]

Currently ampdu_factor is wrongly calculated in ath12k_pe

wifi: ath12k: fix invalid AMPDU factor calculation in ath12k_peer_assoc_h_he()

[ Upstream commit a66de2d0f22b1740f3f9777776ad98c4bee62dff ]

Currently ampdu_factor is wrongly calculated in ath12k_peer_assoc_h_he(), fix it.

This is found during code review.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240710021819.87216-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

wifi: ath12k: fix firmware crash due to invalid peer nss

[ Upstream commit db163a463bb93cd3e37e1e7b10b9726fb6f95857 ]

Currently, if the access point receives an association
request containing an Ex

wifi: ath12k: fix firmware crash due to invalid peer nss

[ Upstream commit db163a463bb93cd3e37e1e7b10b9726fb6f95857 ]

Currently, if the access point receives an association
request containing an Extended HE Capabilities Information
Element with an invalid MCS-NSS, it triggers a firmware
crash.

This issue arises when EHT-PHY capabilities shows support
for a bandwidth and MCS-NSS set for that particular
bandwidth is filled by zeros and due to this, driver obtains
peer_nss as 0 and sending this value to firmware causes
crash.

Address this issue by implementing a validation step for
the peer_nss value before passing it to the firmware. If
the value is greater than zero, proceed with forwarding
it to the firmware. However, if the value is invalid,
reject the association request to prevent potential
firmware crashes.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ajith C <quic_ajithc@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240613053528.2541645-1-quic_ajithc@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath12k: fix uninitialize symbol error on ath12k_peer_assoc_h_he()

[ Upstream commit 19b77e7c656a3e125319cc3ef347b397cf042bf6 ]

Smatch throws following errors

drivers/net/wireless/ath/ath12k/

wifi: ath12k: fix uninitialize symbol error on ath12k_peer_assoc_h_he()

[ Upstream commit 19b77e7c656a3e125319cc3ef347b397cf042bf6 ]

Smatch throws following errors

drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.
drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'.
drivers/net/wireless/ath/ath12k/mac.c:1924 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.

In ath12k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 variables
remain uninitialized in the following conditions:
1. Whenever the value of mcs_80 become equal to
IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_80 remains uninitialized.
2. Whenever phy capability is not supported 160 channel width and
value of mcs_160 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED
then rx_mcs_160 remains uninitialized.

Initialize these variables during declaration.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240611031017.297927-3-quic_aarasahu@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.48' into for/openbmc/dev-6.6

This is the 6.6.48 stable release

wifi: ath12k: fix WARN_ON during ath12k_mac_update_vif_chan

[ Upstream commit 8b8b990fe495e9be057249e1651b59b5ebacf2ef ]

Fix WARN_ON() from ath12k_mac_update_vif_chan() if vdev is not up.
Since cha

wifi: ath12k: fix WARN_ON during ath12k_mac_update_vif_chan

[ Upstream commit 8b8b990fe495e9be057249e1651b59b5ebacf2ef ]

Fix WARN_ON() from ath12k_mac_update_vif_chan() if vdev is not up.
Since change_chanctx can be called even before vdev_up.

Do vdev stop followed by a vdev start in case of vdev is down.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230802085852.19821-2-quic_mdharane@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

wifi: ath12k: fix incorrect logic of calculating vdev_stats_id

[ Upstream commit 019b58dcb6ed267e17b7efd03ec8575c1b67d942 ]

During calculate vdev_stats_id, will compare vdev_stats_id with
ATH12K_IN

wifi: ath12k: fix incorrect logic of calculating vdev_stats_id

[ Upstream commit 019b58dcb6ed267e17b7efd03ec8575c1b67d942 ]

During calculate vdev_stats_id, will compare vdev_stats_id with
ATH12K_INVAL_VDEV_STATS_ID by '<='. If vdev_stats_id is relatively
small, then assign ATH12K_INVAL_VDEV_STATS_ID to vdev_stats_id.

This logic is incorrect. Firstly, should use '>=' instead of '<=' to
check if this u8 variable exceeds the max valid range.

Secondly, should use the maximum value as comparison value.

Correct comparison symbols and use the maximum value
ATH12K_MAX_VDEV_STATS_ID for comparison.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-3-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrights

[ Upstream commit 05205b9576615fca5da91cdae5a3f89f2ad32703 ]

Update the copyright for all ath12k files modified on behalf of
Qualcom

wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrights

[ Upstream commit 05205b9576615fca5da91cdae5a3f89f2ad32703 ]

Update the copyright for all ath12k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2023.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
Stable-dep-of: 902700d55d4a ("wifi: ath12k: fix fetching MCBC flag for QCN9274")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath12k: Fix issues in channel list update

[ Upstream commit 67a48d937fac917947540c9f89630d472cd61fcb ]

Currently, the logic used to select the 6 GHz band is incorrect,
which may cause 6 GHz s

wifi: ath12k: Fix issues in channel list update

[ Upstream commit 67a48d937fac917947540c9f89630d472cd61fcb ]

Currently, the logic used to select the 6 GHz band is incorrect,
which may cause 6 GHz supported channels to not be updated properly.
This is because the 6 GHz Max frequency supported by the driver is
being compared to the Max frequency supported on the board. If in
some cases, the 6 GHz Max frequency supported on the board is less
than the defined 6 GHz Max frequency, all 6 GHz channels are disabled.
To address this, compare the max frequency supported by the board to
the defined 6 GHz Minimum frequency by the driver.

Similarly, when a dual mac card supports both 6 GHz and 5 GHz radios,
if the 5 GHz radio gets enumerated first before 6 GHz, the checks in
ath12k_mac_setup_channels_rates() can cause the 5 GHz channels which
were enabled earlier to get disabled when the 6 GHz channel list is
updated. This is because the Min 6 GHz frequency defined in the driver
is 5945 MHz, which should be 5925 MHz since channel 2 is not considered
currently, but the firmware can pass 5925 MHz as the minimum.
Hence, update the Min frequency supported by the driver to 5925 MHz.

In addition, ensure that the channel list update to firmware updates
only the channels that the current radio (ar) supports rather than
considering the wiphy support. This would be required when multiple pdevs
are supported in a wiphy and they support different ranges of frequencies
or bands as in single wiphy support.

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240117062628.8260-1-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

wifi: ath12k: fix and enable AP mode for WCN7850

[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_ma

wifi: ath12k: fix and enable AP mode for WCN7850

[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an
error will return which makes AP mode startup fail.

Kernel log:

[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:

Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So fix this check and enable AP mode for WCN7850, as now AP mode works normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.6

The second pull re

Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.6

The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.

Major changes:

rtw89
- Introduce Time Averaged SAR (TAS) support

* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================

Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git patches for v6.6. No major changes, only smaller fixes and
cleanups this time.