Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge branch 'for-5.8' into for-linus

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul McKenney:

1. Miscellaneous fixes.
2. kfree_rcu() updates.
3. Remove scheduler locking restriction
4. RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and RCU Tasks Rude. (This branch is on top of #3 due
to overlap of changed code.)
5. RCU CPU stall warning updates.
6. Torture-test updates.

show more ...

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setti

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI changes for v5.8 from Ard Biesheuvel:

"- preliminary changes for RISC-V
- add support for setting the resolution on the EFI framebuffer
- simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays"

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'topic/nhlt' into for-next

Merge NHLT init cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly

Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7

ASoC: tegra: Fixes for v5.7-rc3

This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.

show more ...

Merge branch 'fixes-v5.7' into fixes

Merge drm/drm-next into drm-misc-next

Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next-queued

Backmerging in order to pull "topic/phy-compliance".

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge v5.7-rc1 into drm-misc-fixes

Start the new drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a

Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

arch/x86/Kconfig
arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Highlights:

1) Fix the iwlwifi regression, from Johannes Berg.

2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.

3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.

4) Add TTL decrement action to openvswitch, from Matteo Croce.

5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.

6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.

7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.

8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.

9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.

11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.

12) Support bcmgenet on ACPI, from Jeremy Linton.

13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.

14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.

16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.

17) Offload FIFO qdisc in mlxsw, from Petr Machata.

18) Support UDP sockets in sockmap, from Lorenz Bauer.

19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.

20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.

21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.

22) Add support for hw offload of MACSEC, from Antoine Tenart.

23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.

24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.

25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...

show more ...

Merge branch 'Pause-updates-for-phylib-and-phylink'

Russell King says:

====================
Pause updates for phylib and phylink

Currently, phylib resolves the speed and duplex settings, which MAC

Merge branch 'Pause-updates-for-phylib-and-phylink'

Russell King says:

====================
Pause updates for phylib and phylink

Currently, phylib resolves the speed and duplex settings, which MAC
drivers use directly. phylib also extracts the "Pause" and "AsymPause"
bits from the link partner's advertisement, and stores them in struct
phy_device's pause and asym_pause members with no further processing.
It is left up to each MAC driver to implement decoding for this
information.

phylink converted drivers are able to take advantage of code therein
which resolves the pause advertisements for the MAC driver, but this
does nothing for unconverted drivers. It also does not allow us to
make use of hardware-resolved pause states offered by several PHYs.

This series aims to address this by:

1. Providing a generic implementation, linkmode_resolve_pause(), that
takes the ethtool linkmode arrays for the link partner and local
advertisements, decoding the result to whether pause frames should
be allowed to be transmitted or received and acted upon. I call
this the pause enablement state.

2. Providing a phylib implementation, phy_get_pause(), which allows
MAC drivers to request the pause enablement state from phylib.

3. Providing a generic linkmode_set_pause() for setting the pause
advertisement according to the ethtool tx/rx flags - note that this
design has some shortcomings, see the comments in the kerneldoc for
this function.

4. Remove the ability in phylink to set the pause states for fixed
links, which brings them into line with how we deal with the speed
and duplex parameters; we can reintroduce this later if anyone
requires it. This could be a userspace-visible change.

5. Split application of manual pause enablement state from phylink's
resolution of the same to allow use of phylib's new phy_get_pause()
interface by phylink, and make that switch.

6. Resolve the fixed-link pause enablement state using the generic
linkmode_resolve_pause() helper introduced earlier. This, in
connection with the previous commits, allows us to kill the
MLO_PAUSE_SYM and MLO_PAUSE_ASYM flags.

7. make phylink's ethtool pause setting implementation update the
pause advertisement in the same way that phylib does, with the
same caveats that are present there (as mentioned above w.r.t
linkmode_set_pause()).

8. create a more accurate initial configuration for MACs, used when
phy_start() is called or a SFP is detected. In particular, this
ensures that the pause bits seen by MAC drivers in state->pause
are accurate for SGMII.

9. finally, update the kerneldoc descriptions for mac_config() for
the above changes.

This series has been build-tested against net-next; the boot tested
patches are in my "phy" branch against v5.5 plus the queued phylink
changes that were merged for 5.6.

The next series will introduce the ability for phylib drivers to
provide hardware resolved pause enablement state. These patches can
be found in my "phy" branch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: add linkmode helper for setting flow control advertisement

Add a linkmode helper to set the flow control advertisement in an
ethtool linkmode mask according to the tx/rx capabilities. This
impl

net: add linkmode helper for setting flow control advertisement

Add a linkmode helper to set the flow control advertisement in an
ethtool linkmode mask according to the tx/rx capabilities. This
implementation is moved from phylib, and documented with an
analysis of its shortcomings.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: add helpers to resolve negotiated flow control

Add a couple of helpers to resolve negotiated flow control. Two helpers
are provided:

- linkmode_resolve_pause() which takes the link partner and

net: add helpers to resolve negotiated flow control

Add a couple of helpers to resolve negotiated flow control. Two helpers
are provided:

- linkmode_resolve_pause() which takes the link partner and local
advertisements, and decodes whether we should enable TX or RX pause
at the MAC. This is useful outside of phylib, e.g. in phylink.
- phy_get_pause(), which returns the TX/RX enablement status for the
current negotiation results of the PHY.

This allows us to centralise the flow control resolution, rather than
spreading it around.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...