Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.

Feels like an up-

Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.

Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.

Current release - regressions:

- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again

- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts

- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock

- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work

Current release - new code bugs:

- tcp: fix listen() warning with v4-mapped-v6 address

Previous releases - regressions:

- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it

- eth: mlx5: fix double-free if buffer refill fails under OOM

- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared

- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices

Previous releases - always broken:

- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name

- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in

- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)

- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack

- net: fix interface altnames when ifc moves to a new namespace

- eth: qed: fix the size of the RX buffers

- mptcp: avoid sending RST when closing the initial subflow"

* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...

show more ...

net: phy: bcm7xxx: Add missing 16nm EPHY statistics

The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessa

net: phy: bcm7xxx: Add missing 16nm EPHY statistics

The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.

Reported-by: Justin Chen <justin.chen@broadcom.com>
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'brcm-asp-2.0-support'

Justin Chen says:

====================
Brcm ASP 2.0 Ethernet Controller

Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with

Merge branch 'brcm-asp-2.0-support'

Justin Chen says:

====================
Brcm ASP 2.0 Ethernet Controller

Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with 72165.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: phy: bcm7xxx: Add EPHY entry for 74165

74165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.

Reviewed-by: Simon

net: phy: bcm7xxx: Add EPHY entry for 74165

74165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit k

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit kernel mode NEON in softirq context
resulted in some issues regarding en/disabling of sofirqs from asm code,
and this made it clear that it would be better to handle more of it from
C code.

Given that we already have infrastructure that associates undefined
instruction exceptions with handler code based on value/mask pairs, we
can easily move the dispatch of VFP and NEON instructions to C code once
we reimplement the actual VFP support routine (which reasons about how
to deal with the exception and whether any emulation is needed) in C
code first.

With those out of the way, we can drop the partial decoding logic in asm
that reasons about which ISA is being used by user space, as the
remaining cases are all 32-bit ARM only. This leaves a FPE specific
routine with some iWMMXT logic that is easily duplicated in C as well,
allowing us to move the FPE asm code into the FPE asm source file, and
out of the shared entry code.

show more ...

Merge branch 'for-next' into for-linus

Pull the 6.5-devel branch for upstreaming.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow th

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue

- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...

- Add some missing interrupt to the STM32 irqchip

- A bunch of warning squashing triggered by W=1 builds

Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org

show more ...

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.

Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.

This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc8487b ("MAINTAINERS: re-sort
all entries and fields").

Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging from drm-next to get commit e24e6d695377 ("drm/i915/display:
Implement fb_mmap callback function").

Signed-off-by: Thomas Zimmermann <tzimmermann@s

Merge drm/drm-next into drm-misc-next

Backmerging from drm-next to get commit e24e6d695377 ("drm/i915/display:
Implement fb_mmap callback function").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next

perf tools fixes for v6.4: 2nd batch

- Fix BPF CO-RE naming convention for checking the availability of fields on
'union pe

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next

perf tools fixes for v6.4: 2nd batch

- Fix BPF CO-RE naming convention for checking the availability of fields on
'union perf_mem_data_src' on the running kernel.

- Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
build breakage when the llvm package, that contains it in most distros, isn't
installed.

- Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
union.

- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
previously it was working only when using the '-n' alternative.

- Don't stop building when both binutils-devel and a C++ compiler isn't
available to compile the alternative C++ demangle support code, disable that
feature instead.

- Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.

- Fix relative include path to cs-etm.h.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync the drm-intel-gt-next changes back to drm-intel-next via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge 6.4-rc4 into usb-next

We need the USB fixes in here and this resolves merge conflicts in:
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/udc/core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@l

Merge 6.4-rc4 into usb-next

We need the USB fixes in here and this resolves merge conflicts in:
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/udc/core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge v6.4-rc4 into char-misc-next

We need the binder fixes in here for future changes and testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.4-rc3 into tty-next

We need the serial/tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: Merge up v6.4-rc3

Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.

regulator: Merge up v6.4-rc3

Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.