Merge tag 'v6.6.70' into for/openbmc/dev-6.6

This is the 6.6.70 stable release

Conflicts:
include/linux/usb/chipidea.h

Conflict was a trivial addition.

Signed-off-by: Andrew Jeffery <andrew@c

Merge tag 'v6.6.70' into for/openbmc/dev-6.6

This is the 6.6.70 stable release

Conflicts:
include/linux/usb/chipidea.h

Conflict was a trivial addition.

Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

show more ...

net: stmmac: restructure the error path of stmmac_probe_config_dt()

[ Upstream commit 2b6ffcd7873b7e8a62c3e15a6f305bfc747c466b ]

Current implementation of stmmac_probe_config_dt() does not release

net: stmmac: restructure the error path of stmmac_probe_config_dt()

[ Upstream commit 2b6ffcd7873b7e8a62c3e15a6f305bfc747c466b ]

Current implementation of stmmac_probe_config_dt() does not release the
OF node reference obtained by of_parse_phandle() in some error paths.
The problem is that some error paths call stmmac_remove_config_dt() to
clean up but others use and unwind ladder. These two types of error
handling have not kept in sync and have been a recurring source of bugs.
Re-write the error handling in stmmac_probe_config_dt() to use an unwind
ladder. Consequently, stmmac_remove_config_dt() is not needed anymore,
thus remove it.

This bug was found by an experimental verification tool that I am
developing.

Fixes: 4838a5405028 ("net: stmmac: Fix wrapper drivers not detecting PHY")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241219024119.2017012-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: don't create a MDIO bus if unnecessary

[ Upstream commit f3c2caacee824ce4a331cdafb0b8dc8e987f105e ]

Currently a MDIO bus is created if the devicetree description is either:

1. Not

net: stmmac: don't create a MDIO bus if unnecessary

[ Upstream commit f3c2caacee824ce4a331cdafb0b8dc8e987f105e ]

Currently a MDIO bus is created if the devicetree description is either:

1. Not fixed-link
2. fixed-link but contains a MDIO bus as well

The "1" case above isn't always accurate. If there's a phy-handle,
it could be referencing a phy on another MDIO controller's bus[1]. In
this case, where the MDIO bus is not described at all, currently
stmmac will make a MDIO bus and scan its address space to discover
phys (of which there are none). This process takes time scanning a bus
that is known to be empty, delaying time to complete probe.

There are also a lot of upstream devicetrees[2] that expect a MDIO bus
to be created, scanned for phys, and the first one found connected
to the MAC. This case can be inferred from the platform description by
not having a phy-handle && not being fixed-link. This hits case "1" in
the current driver's logic, and must be handled in any logic change here
since it is a valid legacy dt-binding.

Let's improve the logic to create a MDIO bus if either:

- Devicetree contains a MDIO bus
- !fixed-link && !phy-handle (legacy handling)

This way the case where no MDIO bus should be made is handled, as well
as retaining backwards compatibility with the valid cases.

Below devicetree snippets can be found that explain some of
the cases above more concretely.

Here's[0] a devicetree example where the MAC is both fixed-link and
driving a switch on MDIO (case "2" above). This needs a MDIO bus to
be created:

&fec1 {
phy-mode = "rmii";

fixed-link {
speed = <100>;
full-duplex;
};

mdio1: mdio {
switch0: switch0@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
};
};
};

Here's[1] an example where there is no MDIO bus or fixed-link for
the ethernet1 MAC, so no MDIO bus should be created since ethernet0
is the MDIO master for ethernet1's phy:

&ethernet0 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy0>;

mdio {
compatible = "snps,dwmac-mdio";
sgmii_phy0: phy@8 {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0x8>;
device_type = "ethernet-phy";
};

sgmii_phy1: phy@a {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0xa>;
device_type = "ethernet-phy";
};
};
};

&ethernet1 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy1>;
};

Finally there's descriptions like this[2] which don't describe the
MDIO bus but expect it to be created and the whole address space
scanned for a phy since there's no phy-handle or fixed-link described:

&gmac {
phy-supply = <&vcc_lan>;
phy-mode = "rmii";
snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
};

[0] https://elixir.bootlin.com/linux/v6.5-rc5/source/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
[1] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
[2] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/rockchip/rk3368-r88.dts#L164

Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.63' into for/openbmc/dev-6.6

This is the 6.6.63 stable release

net: stmmac: rename stmmac_pltfr_remove_no_dt to stmmac_pltfr_remove

[ Upstream commit 2c9fc838067b02cb3e6057fef5cd7cf1c04a95aa ]

Now, all users of the old stmmac_pltfr_remove() are converted to th

net: stmmac: rename stmmac_pltfr_remove_no_dt to stmmac_pltfr_remove

[ Upstream commit 2c9fc838067b02cb3e6057fef5cd7cf1c04a95aa ]

Now, all users of the old stmmac_pltfr_remove() are converted to the
devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to
stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove().

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.15' into dev-6.6

This is the 6.6.15 stable release

net: stmmac: Tx coe sw fallback

[ Upstream commit 8452a05b2c633b708dbe3e742f71b24bf21fe42d ]

Add sw fallback of tx checksum calculation for those tx queues that
don't support tx checksum offloading

net: stmmac: Tx coe sw fallback

[ Upstream commit 8452a05b2c633b708dbe3e742f71b24bf21fe42d ]

Add sw fallback of tx checksum calculation for those tx queues that
don't support tx checksum offloading. DW xGMAC IP can be synthesized
such that it can support tx checksum offloading only for a few
initial tx queues. Also as Serge pointed out, for the DW QoS IP, tx
coe can be individually configured for each tx queue.

So when tx coe is enabled, for any tx queue that doesn't support
tx coe with 'coe-unsupported' flag set will have a sw fallback
happen in the driver for tx checksum calculation when any packets to
be transmitted on these tx queues.

Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: c2945c435c99 ("net: stmmac: Prevent DSA tags from breaking COE")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.

I didn't

Merge tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.

I didn't collect precise data but feels like we've got a lot of 6.5
fixes here. WiFi fixes are most user-awaited.

Current release - regressions:

- Bluetooth: fix hci_link_tx_to RCU lock usage

Current release - new code bugs:

- bpf: mprog: fix maximum program check on mprog attachment

- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()

Previous releases - regressions:

- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling

- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it
doesn't handle zero length like we expected

- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling

- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER

- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()

- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent

- eth: stmmac: fix the incorrect parameter after refactoring

Previous releases - always broken:

- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller

- tcp: fix delayed ACKs when reads and writes align with MSS

- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size, fix
struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets

- ipv4/fib: send netlink notify when delete source address routes

- ethtool: plca: fix width of reads when parsing netlink commands

- netfilter: nft_payload: rebuild vlan header on h_proto access

- Bluetooth: hci_codec: fix leaking memory of local_codecs

- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids

- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI

- ibmveth: always recompute TCP pseudo-header checksum, fix use of
the driver with Open vSwitch

- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API

Misc:

- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length"

* tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
MAINTAINERS: update Matthieu's email address
mptcp: userspace pm allow creating id 0 subflow
mptcp: fix delegated action races
net: stmmac: remove unneeded stmmac_poll_controller
net: lan743x: also select PHYLIB
net: ethernet: mediatek: disable irq before schedule napi
net: mana: Fix oversized sge0 for GSO packets
net: mana: Fix the tso_bytes calculation
net: mana: Fix TX CQE error handling
netlink: annotate data-races around sk->sk_err
sctp: update hb timer immediately after users change hb_interval
sctp: update transport state when processing a dupcook packet
tcp: fix delayed ACKs for MSS boundary condition
tcp: fix quick-ack counting to count actual ACKs of new data
page_pool: fix documentation typos
tipc: fix a potential deadlock on &tx->lock
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
ipv4: Set offload_failed flag in fibmatch results
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
...

show more ...

net: stmmac: platform: fix the incorrect parameter

The second parameter of stmmac_pltfr_init() needs the pointer of
"struct plat_stmmacenet_data". So, correct the parameter typo when calling the
fun

net: stmmac: platform: fix the incorrect parameter

The second parameter of stmmac_pltfr_init() needs the pointer of
"struct plat_stmmacenet_data". So, correct the parameter typo when calling the
function.

Otherwise, it may cause this alignment exception when doing suspend/resume.
[ 49.067201] CPU1 is up
[ 49.135258] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP
[ 49.143346] Modules linked in: soc_imx9 crct10dif_ce polyval_ce nvmem_imx_ocotp_fsb_s400 polyval_generic layerscape_edac_mod snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_imx_card snd_soc_wm8962 el_enclave snd_soc_fsl_micfil rtc_pcf2127 rtc_pcf2131 flexcan can_dev snd_soc_fsl_xcvr snd_soc_fsl_sai imx8_media_dev(C) snd_soc_fsl_utils fuse
[ 49.173393] CPU: 0 PID: 565 Comm: sh Tainted: G C 6.5.0-rc4-next-20230804-05047-g5781a6249dae #677
[ 49.183721] Hardware name: NXP i.MX93 11X11 EVK board (DT)
[ 49.189190] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 49.196140] pc : 0x80800052
[ 49.198931] lr : stmmac_pltfr_resume+0x34/0x50
[ 49.203368] sp : ffff800082f8bab0
[ 49.206670] x29: ffff800082f8bab0 x28: ffff0000047d0ec0 x27: ffff80008186c170
[ 49.213794] x26: 0000000b5e4ff1ba x25: ffff800081e5fa74 x24: 0000000000000010
[ 49.220918] x23: ffff800081fe0000 x22: 0000000000000000 x21: 0000000000000000
[ 49.228042] x20: ffff0000001b4010 x19: ffff0000001b4010 x18: 0000000000000006
[ 49.235166] x17: ffff7ffffe007000 x16: ffff800080000000 x15: 0000000000000000
[ 49.242290] x14: 00000000000000fc x13: 0000000000000000 x12: 0000000000000000
[ 49.249414] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff800082f8b8c0
[ 49.256538] x8 : 0000000000000008 x7 : 0000000000000001 x6 : 000000005f54a200
[ 49.263662] x5 : 0000000001000000 x4 : ffff800081b93680 x3 : ffff800081519be0
[ 49.270786] x2 : 0000000080800052 x1 : 0000000000000000 x0 : ffff0000001b4000
[ 49.277911] Call trace:
[ 49.280346] 0x80800052
[ 49.282781] platform_pm_resume+0x2c/0x68
[ 49.286785] dpm_run_callback.constprop.0+0x74/0x134
[ 49.291742] device_resume+0x88/0x194
[ 49.295391] dpm_resume+0x10c/0x230
[ 49.298866] dpm_resume_end+0x18/0x30
[ 49.302515] suspend_devices_and_enter+0x2b8/0x624
[ 49.307299] pm_suspend+0x1fc/0x348
[ 49.310774] state_store+0x80/0x104
[ 49.314258] kobj_attr_store+0x18/0x2c
[ 49.318002] sysfs_kf_write+0x44/0x54
[ 49.321659] kernfs_fop_write_iter+0x120/0x1ec
[ 49.326088] vfs_write+0x1bc/0x300
[ 49.329485] ksys_write+0x70/0x104
[ 49.332874] __arm64_sys_write+0x1c/0x28
[ 49.336783] invoke_syscall+0x48/0x114
[ 49.340527] el0_svc_common.constprop.0+0xc4/0xe4
[ 49.345224] do_el0_svc+0x38/0x98
[ 49.348526] el0_svc+0x2c/0x84
[ 49.351568] el0t_64_sync_handler+0x100/0x12c
[ 49.355910] el0t_64_sync+0x190/0x194
[ 49.359567] Code: ???????? ???????? ???????? ???????? (????????)
[ 49.365644] ---[ end trace 0000000000000000 ]---

Fixes: 97117eb51ec8 ("net: stmmac: platform: provide stmmac_pltfr_init()")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.

Current release - regres

Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.

Current release - regressions:

- eth: stmmac: fix failure to probe without MAC interface specified

Current release - new code bugs:

- docs: netlink: fix missing classic_netlink doc reference

Previous releases - regressions:

- deal with integer overflows in kmalloc_reserve()

- use sk_forward_alloc_get() in sk_get_meminfo()

- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

- fib: avoid warn splat in flow dissector after packet mangling

- skb_segment: call zero copy functions before using skbuff frags

- eth: sfc: check for zero length in EF10 RX prefix

Previous releases - always broken:

- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT

- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release

- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

- handshake: fix null-deref in handshake_nl_done_doit()

- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops

- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata

Misc:

- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...

show more ...

net: stmmac: failure to probe without MAC interface specified

Alexander Stein reports that commit a014c35556b9 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused brea

net: stmmac: failure to probe without MAC interface specified

Alexander Stein reports that commit a014c35556b9 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused breakage,
because plat->mac_interface will never be negative. Fix this by using
the "rc" temporary variable in stmmac_probe_config_dt().

Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/E1qayn0-006Q8J-GE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

net: stmmac: clarify difference between "interface" and "phy_interface"

Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and a

net: stmmac: clarify difference between "interface" and "phy_interface"

Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and also
renaming "interface" to be "mac_interface". The difference between
these are:

MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media
^ ^
mac_interface phy_interface

Note that phylink currently only deals with phy_interface.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZq83-005tts-6K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'stmmac-cleanups'

Russell King says:

====================
stmmac cleanups

One of the comments I had on Feiyang Chen's series was concerning the
initialisation of phylink... and so I'v

Merge branch 'stmmac-cleanups'

Russell King says:

====================
stmmac cleanups

One of the comments I had on Feiyang Chen's series was concerning the
initialisation of phylink... and so I've decided to do something about
it, cleaning it up a bit.

This series:

1) adds a new phylink function to limit the MAC capabilities according
to a maximum speed. This allows us to greatly simplify stmmac's
initialisation of phylink's mac capabilities.

2) everywhere that uses priv->plat->phylink_node first converts this
to a fwnode before doing anything with it. This is silly. Let's
instead store it as a fwnode to eliminate these conversions in
multiple places.

3) clean up passing the fwnode to phylink - it might as well happen
at the phylink_create() callsite, rather than being scattered
throughout the entire function.

4) same for mdio_bus_data

5) use phylink_limit_mac_speed() to handle the priv->plat->max_speed
restriction.

6) add a method to get the MAC-specific capabilities from the code
dealing with the MACs, and arrange to call it at an appropriate
time.

7) convert the gmac4 users to use the MAC specific method.

8) same for xgmac.

9) group all the simple phylink_config initialisations together.

10) convert half-duplex logic to being positive logic.

While looking into all of this, this raised eyebrows:

if (priv->plat->tx_queues_to_use > 1)
priv->phylink_config.mac_capabilities &=
~(MAC_10HD | MAC_100HD | MAC_1000HD);

priv->plat->tx_queues_to_use is initialised by platforms to either 1,
4 or 8, and can be controlled from userspace via the --set-channels
ethtool op. The implementation of this op in this driver limits the
number of channels to priv->dma_cap.number_tx_queues, which is derived
from the DMA hwcap.

So, the obvious questions are:

1) what guarantees that the static initialisation of tx_queues_to_use
will always be less than or equal to number_tx_queues from the DMA hw
cap?

2) tx_queues_to_use starts off as 1, but number_tx_queues is larger,
we will leave the half-duplex capabilities in place, but userspace can
increase tx_queues_to_use above 1. Does that mean half-duplex is then
not supported?

3) Should we be basing the decision whether half-duplex is supported
off the DMA capabilities?

4) What about priv->dma_cap.half_duplex? Doesn't that get a say in
whether half-duplex is supported or not? Why isn't this used? Why is
it only reported via debugfs? If it's not being used by the driver,
what's the point of reporting it via debugfs?
====================

Link: https://lore.kernel.org/r/ZOddFH22PWmOmbT5@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: stmmac: convert plat->phylink_node to fwnode

All users of plat->phylink_node first convert it to a fwnode. Rather
than repeatedly convert to a fwnode, store it as a fwnode. To reflect
this chan

net: stmmac: convert plat->phylink_node to fwnode

All users of plat->phylink_node first convert it to a fwnode. Rather
than repeatedly convert to a fwnode, store it as a fwnode. To reflect
this change, call it plat->port_node instead - it is used for more
than just phylink.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAX8-005pTo-OT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

net: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that mer

net: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Acked-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge branch 'net-stmmac-replace-boolean-fields-in-plat_stmmacenet_data-with-flags'

Bartosz Golaszewski says:

====================
net: stmmac: replace boolean fields in plat_stmmacenet_data with f

Merge branch 'net-stmmac-replace-boolean-fields-in-plat_stmmacenet_data-with-flags'

Bartosz Golaszewski says:

====================
net: stmmac: replace boolean fields in plat_stmmacenet_data with flags

As suggested by Jose Abreu: let's drop all 12 boolean fields in
plat_stmmacenet_data and replace them with a common bitfield.
====================

Link: https://lore.kernel.org/r/20230710090001.303225-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: stmmac: replace the en_tx_lpi_clockgating field with a flag

Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski

net: stmmac: replace the en_tx_lpi_clockgating field with a flag

Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230710090001.303225-13-brgl@bgdev.pl
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...