Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side a

Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side as the upstream stable
branches cherry-picked a small number of changes out of a much large
series, which has already been backported.

show more ...

net: stmmac: Limit FIFO size by hardware capability

[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ]

Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platf

net: stmmac: Limit FIFO size by hardware capability

[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ]

Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.

However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.

This only works if the hardware capability has the upper limit values.

Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: Limit the number of MTL queues to hardware capability

[ Upstream commit f5fb35a3d6b36d378b2e2ecbfb9caa337d5428e6 ]

The number of MTL queues to use is specified by the parameter
"snps,{

net: stmmac: Limit the number of MTL queues to hardware capability

[ Upstream commit f5fb35a3d6b36d378b2e2ecbfb9caa337d5428e6 ]

The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.

However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.

This only works if the hardware capability has the upper limit values.

Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.68' into for/openbmc/dev-6.6

This is the 6.6.68 stable release

net: stmmac: fix TSO DMA API usage causing oops

[ Upstream commit 4c49f38e20a57f8abaebdf95b369295b153d1f8e ]

Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB d

net: stmmac: fix TSO DMA API usage causing oops

[ Upstream commit 4c49f38e20a57f8abaebdf95b369295b153d1f8e ]

Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().

The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.

This causes problems such as:

dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed

and with DMA_API_DEBUG enabled:

DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]

Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().

Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.61' into for/openbmc/dev-6.6

This is the 6.6.61 stable release

net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case

[ Upstream commit 25d70702142ac2115e75e01a0a985c6ea1d78033 ]

Commit a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caus

net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case

[ Upstream commit 25d70702142ac2115e75e01a0a985c6ea1d78033 ]

Commit a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by
unbalanced disable_irq_wake calls") introduced checks to prevent
unbalanced enable and disable IRQ wake calls. However it only
initialized the auxiliary variable on one of the paths,
stmmac_request_irq_multi_msi(), missing the other,
stmmac_request_irq_single().

Add the same initialization on stmmac_request_irq_single() to prevent
"Unbalanced IRQ <x> wake disable" warnings from being printed the first
time disable_irq_wake() is called on platforms that run on that code
path.

Fixes: a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.60' into for/openbmc/dev-6.6

This is the 6.6.60 stable release

net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data

[ Upstream commit 66600fac7a984dea4ae095411f644770b2561ede ]

In case the non-paged data of a SKB carries protocol header and pr

net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data

[ Upstream commit 66600fac7a984dea4ae095411f644770b2561ede ]

In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.

For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.

The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;

On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(

In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.

This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.

Tested and verified on DWXGMAC CORE 3.20a

Reported-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Fixes: f748be531d70 ("stmmac: support new GMAC4")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021061023.2162701-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.57' into for/openbmc/dev-6.6

This is the 6.6.57 stable release

Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled"

[ Upstream commit 5546da79e6cc5bb3324bf25688ed05498fd3f86d ]

This reverts commit b514c47ebf41a6536551ed28a05758036e6eca7c.

The

Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled"

[ Upstream commit 5546da79e6cc5bb3324bf25688ed05498fd3f86d ]

This reverts commit b514c47ebf41a6536551ed28a05758036e6eca7c.

The commit describes that we don't have to sync the page when
recycling, and it tries to optimize that case. But we do need
to sync after allocation. Recycling side should be changed to
pass the right sync size instead.

Fixes: b514c47ebf41 ("net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/20241004070846.2502e9ea@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20241004142115.910876-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled

[ Upstream commit b514c47ebf41a6536551ed28a05758036e6eca7c ]

Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_D

net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled

[ Upstream commit b514c47ebf41a6536551ed28a05758036e6eca7c ]

Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.

When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().

After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.

Fixes: 5fabb01207a2 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.44' into for/openbmc/dev-6.6

This is the 6.6.44 stable release

net: stmmac: Correct byte order of perfect_match

[ Upstream commit e9dbebae2e3c338122716914fe105458f41e3a4a ]

The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correct

net: stmmac: Correct byte order of perfect_match

[ Upstream commit e9dbebae2e3c338122716914fe105458f41e3a4a ]

The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correctly converted from host byte-order in the lone caller,
stmmac_vlan_update().

However, the implementations of this caller, dwxgmac2_update_vlan_hash()
and dwxgmac2_update_vlan_hash(), both treat this parameter as host byte
order, using the following pattern:

u32 value = ...
...
writel(value | perfect_match, ...);

This is not correct because both:
1) value is host byte order; and
2) writel expects a host byte order value as it's first argument

I believe that this will break on big endian systems. And I expect it
has gone unnoticed by only being exercised on little endian systems.

The approach taken by this patch is to update the callback, and it's
caller to simply use a host byte order value.

Flagged by Sparse.
Compile tested only.

Fixes: c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.29' into dev-6.6

This is the 6.6.29 stable release

net: stmmac: Fix IP-cores specific MAC capabilities

[ Upstream commit 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 ]

Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores

net: stmmac: Fix IP-cores specific MAC capabilities

[ Upstream commit 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 ]

Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:

DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100

DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000

Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000

DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD

DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD

DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD

As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.

Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.

Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.

Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: Fix max-speed being ignored on queue re-init

[ Upstream commit 59c3d6ca6cbded6c6599e975b42a9d6a27fcbaf2 ]

It's possible to have the maximum link speed being artificially limited on
the

net: stmmac: Fix max-speed being ignored on queue re-init

[ Upstream commit 59c3d6ca6cbded6c6599e975b42a9d6a27fcbaf2 ]

It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.

Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.

Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only

[ Upstream commit 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b ]

There are three DW MAC IP-cores which can have the multiple Tx/Rx que

net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only

[ Upstream commit 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b ]

There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:

"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."

The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.

Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.21' into dev-6.6

This is the 6.6.21 stable release

Merge tag 'v6.6.19' into dev-6.6

This is the 6.6.19 stable release

Merge tag 'v6.6.18' into dev-6.6

This is the 6.6.18 stable release

stmmac: Clear variable when destroying workqueue

[ Upstream commit 8af411bbba1f457c33734795f024d0ef26d0963f ]

Currently when suspending driver and stopping workqueue it is checked whether
workqueue

stmmac: Clear variable when destroying workqueue

[ Upstream commit 8af411bbba1f457c33734795f024d0ef26d0963f ]

Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.

This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.

To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.

Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004

Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: Fix incorrect dereference in interrupt handlers

[ Upstream commit 97dde84026339e4b4af9a6301f825d1828d7874b ]

If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
wh

net: stmmac: Fix incorrect dereference in interrupt handlers

[ Upstream commit 97dde84026339e4b4af9a6301f825d1828d7874b ]

If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
when dereferencing calling netdev_err().

Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument
to request_irq() during interrupt initialization (that is, the net_device
and rx/tx queue pointers initialized at the time of the call) and since
there are usually no checks for the 'dev_id' argument in such handlers
in other drivers, remove these checks from the handlers in stmmac driver.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 8532f613bc78 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: protect updates of 64-bit statistics counters

commit 38cc3c6dcc09dc3a1800b5ec22aef643ca11eab8 upstream.

As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_

net: stmmac: protect updates of 64-bit statistics counters

commit 38cc3c6dcc09dc3a1800b5ec22aef643ca11eab8 upstream.

As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.

To fix the issue without introducing a new lock, split the statics into
three parts:

1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,

Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.

Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().

For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats.

Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...