Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge branch 'mlxsw-redirection'

Petr Machata says:

====================
mlxsw: Support traffic redirection from a locked bridge port

Ido Schimmel writes:

It is possible to add a filter that redi

Merge branch 'mlxsw-redirection'

Petr Machata says:

====================
mlxsw: Support traffic redirection from a locked bridge port

Ido Schimmel writes:

It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:

# ip link add name br0 type bridge
# ip link set dev swp1 master br0
# bridge link set dev swp1 learning on locked on mab on
# tc qdisc add dev swp1 clsact
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2

In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.

However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.

The learning discrepancy was handled in commit 577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.

Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.

Patch #1 adds the ignore action.

Patch #2 prepends the action to the redirect action in flower offload
code.

Patch #3 removes the workaround in commit 577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") since it is
no longer needed.

Patch #4 adds a test case.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlxsw: spectrum: Stop ignoring learning notifications from redirected traffic

As explained in the previous patch, with the ignore action prepended to
the redirect action, it is not longer possible f

mlxsw: spectrum: Stop ignoring learning notifications from redirected traffic

As explained in the previous patch, with the ignore action prepended to
the redirect action, it is not longer possible for redirected traffic to
generate learning notifications.

Therefore, remove the workaround that was added in commit 577fa14d2100
("mlxsw: spectrum: Do not process learned records with a dummy FID") as
it is no longer needed.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlxsw: spectrum_flower: Disable learning and security lookup when redirecting

It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs s

mlxsw: spectrum_flower: Disable learning and security lookup when redirecting

It is possible to add a filter that redirects traffic from the ingress
of a bridge port that is locked (i.e., performs security / SMAC lookup)
and has learning enabled. For example:

# ip link add name br0 type bridge
# ip link set dev swp1 master br0
# bridge link set dev swp1 learning on locked on mab on
# tc qdisc add dev swp1 clsact
# tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2

In the kernel's Rx path, this filter is evaluated before the Rx handler
of the bridge, which means that redirected traffic should not be
affected by bridge port configuration such as learning.

However, the hardware data path is a bit different and the redirect
action (FORWARDING_ACTION in hardware) merely attaches a pointer to the
packet, which is later used by the L2 lookup stage to understand how to
forward the packet. Between both stages - ingress ACL and L2 lookup -
learning and security lookup are performed, which means that redirected
traffic is affected by bridge port configuration, unlike in the kernel's
data path.

The learning discrepancy was handled in commit 577fa14d2100 ("mlxsw:
spectrum: Do not process learned records with a dummy FID") by simply
ignoring learning notifications generated by the redirected traffic. A
similar solution is not possible for the security / SMAC lookup since
- unlike learning - the CPU is not involved and packets that failed the
lookup are dropped by the device.

Instead, solve this by prepending the ignore action to the redirect
action and use it to instruct the device to disable both learning and
the security / SMAC lookup for redirected traffic.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

mlxsw: spectrum: Remove unused function declarations

Commit c3d2ed93b14d ("mlxsw: Remove old parsing depth infrastructure")
left behind mlxsw_sp_nve_inc_parsing_depth_get()/mlxsw_sp_nve_inc_parsing_

mlxsw: spectrum: Remove unused function declarations

Commit c3d2ed93b14d ("mlxsw: Remove old parsing depth infrastructure")
left behind mlxsw_sp_nve_inc_parsing_depth_get()/mlxsw_sp_nve_inc_parsing_depth_put().
And commit 532b49e41e64 ("mlxsw: spectrum_span: Derive SBIB from maximum port speed & MTU")
remove mlxsw_sp_span_port_mtu_update()/mlxsw_sp_span_speed_update_work() but leave the
declarations.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230803142047.42660-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'mlxsw-avoid-non-tracker-helpers-when-holding-and-putting-netdevices'

Petr Machata says:

====================
mlxsw: Avoid non-tracker helpers when holding and putting netdevices

Usin

Merge branch 'mlxsw-avoid-non-tracker-helpers-when-holding-and-putting-netdevices'

Petr Machata says:

====================
mlxsw: Avoid non-tracker helpers when holding and putting netdevices

Using the tracking helpers, netdev_hold() and netdev_put(), makes it easier
to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER
is enabled. For example, the following traceback shows the callpath to the
point of an outstanding hold that was never put:

unregister_netdevice: waiting for swp3 to become free. Usage count = 6
ref_tracker: eth%d@ffff888123c9a580 has 1/5 users at
mlxsw_sp_switchdev_event+0x6bd/0xcc0 [mlxsw_spectrum]
notifier_call_chain+0xbf/0x3b0
atomic_notifier_call_chain+0x78/0x200
br_switchdev_fdb_notify+0x25f/0x2c0 [bridge]
fdb_notify+0x16a/0x1a0 [bridge]
[...]

In this patchset, get rid of all non-ref-tracking helpers in mlxsw.

- Patch #1 drops two functions that are not used anymore, but contain
dev_hold() / dev_put() calls.

- Patch #2 avoids taking a reference in one function which is called
under RTNL.

- The remaining patches convert individual hold/put sites one by one
from trackerless to tracker-enabled.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/netdev/4c056da27c19d95ffeaba5acf1427ecadfc3f94c.camel@redhat.com/
====================

Link: https://lore.kernel.org/r/cover.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mlxsw: spectrum: Drop unused functions mlxsw_sp_port_lower_dev_hold/_put()

As of commit 151b89f6025a ("mlxsw: spectrum_router: Reuse work neighbor
initialization in work scheduler"), the functions
m

mlxsw: spectrum: Drop unused functions mlxsw_sp_port_lower_dev_hold/_put()

As of commit 151b89f6025a ("mlxsw: spectrum_router: Reuse work neighbor
initialization in work scheduler"), the functions
mlxsw_sp_port_lower_dev_hold() and mlxsw_sp_port_dev_put() have no users.
Drop them.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d0adcd7cb4ea19416294a0f861100edba84c9f36.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'mlxsw-enslavement'

Petr Machata says:

====================
mlxsw: Permit enslavement to netdevices with uppers

The mlxsw driver currently makes the assumption that the user applies
c

Merge branch 'mlxsw-enslavement'

Petr Machata says:

====================
mlxsw: Permit enslavement to netdevices with uppers

The mlxsw driver currently makes the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices need to be added to
the bridge before IP addresses are configured on that bridge or SVI added
on top of it. Enslaving a netdevice to another netdevice that already has
uppers is in fact forbidden by mlxsw for this reason. Despite this safety,
it is rather easy to get into situations where the offloaded configuration
is just plain wrong.

As an example, take a front panel port, configure an IP address: it gets a
RIF. Now enslave the port to the bridge, and the RIF is gone. Remove the
port from the bridge again, but the RIF never comes back. There is a number
of similar situations, where changing the configuration there and back
utterly breaks the offload.

Similarly, detaching a front panel port from a configured topology means
unoffloading of this whole topology -- VLAN uppers, next hops, etc.
Attaching the port back is then not permitted at all. If it were, it would
not result in a working configuration, because much of mlxsw is written to
react to changes in immediate configuration. There is nothing that would go
visit netdevices in the attached-to topology and offload existing routes
and VLAN memberships, for example.

In this patchset, introduce a number of replays to be invoked so that this
sort of post-hoc offload is supported. Then remove the vetoes that
disallowed enslavement of front panel ports to other netdevices with
uppers.

The patchset progresses as follows:

- In patch #1, fix an issue in the bridge driver. To my knowledge, the
issue could not have resulted in a buggy behavior previously, and thus is
packaged with this patchset instead of being sent separately to net.

- In patch #2, add a new helper to the switchdev code.

- In patch #3, drop mlxsw selftests that will not be relevant after this
patchset anymore.

- Patches #4, #5, #6, #7 and #8 prepare the codebase for smoother
introduction of the rest of the code.

- Patches #9, #10, #11, #12, #13 and #14 replay various aspects of upper
configuration when a front panel port is introduced into a topology.
Individual patches take care of bridge and LAG RIF memberships, switchdev
replay, nexthop and neighbors replay, and MACVLAN offload.

- Patches #15 and #16 introduce RIFs for newly-relevant netdevices when a
front panel port is enslaved (in which case all uppers are newly
relevant), or, respectively, deslaved (in which case the newly-relevant
netdevice is the one being deslaved).

- Up until this point, the introduced scaffolding was not really used,
because mlxsw still forbids enslavement of mlxsw netdevices to uppers
with uppers. In patch #17, this condition is finally relaxed.

A sizable selftest suite is available to test all this new code. That will
be sent in a separate patchset.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlxsw: spectrum_switchdev: Replay switchdev objects on port join

Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where thi

mlxsw: spectrum_switchdev: Replay switchdev objects on port join

Currently it never happens that a netdevice that is already a bridge slave
would suddenly become mlxsw upper. The only case where this might be
possible as far as mlxsw is concerned, is with LAG netdevices. But if a LAG
has any upper (e.g. is enslaved), enlaving mlxsw port to that LAG is
forbidden. Thus the only way to install a LAG between a bridge and a mlxsw
port is by first enslaving the port to the LAG, and then enslaving that LAG
to a bridge. At that point there are no bridge objects (such as port VLANs)
to replay. Those are added afterwards, and notified as they are created.
This holds even for the PVID.

However in the following patches, the requirement that ports be only
enslaved to masters without uppers, is going to be relaxed. It will
therefore be necessary to replay the existing bridge objects. Without this
replay, e.g. the mlxsw bridge_port_vlan objects are not instantiated, which
causes issues later, as a lot of code relies on their presence.

To that end, add a new notifier block whose sole role is to filter out
events related to the one relevant upper, and forward those to the existing
switchdev notifier block. Pass the new notifier block to
switchdev_bridge_port_offload() when the bridge port is created.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge branch 'mlxsw-add-port-range-matching-support'

Petr Machata says:

====================
mlxsw: Add port range matching support

Ido Schimmel writes:

Add port range matching support in mlxsw a

Merge branch 'mlxsw-add-port-range-matching-support'

Petr Machata says:

====================
mlxsw: Add port range matching support

Ido Schimmel writes:

Add port range matching support in mlxsw as part of tc-flower offload.

Patches #1-#7 gradually add port range matching support in mlxsw. See
patch #3 to understand how port range matching is implemented in the
device.

Patches #8-#10 add selftests.
====================

Link: https://lore.kernel.org/r/cover.1689092769.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mlxsw: spectrum_flower: Add ability to match on port ranges

Add the ability to match on port ranges by utilizing the previously
added port range registers and the port range key element. Up to two
p

mlxsw: spectrum_flower: Add ability to match on port ranges

Add the ability to match on port ranges by utilizing the previously
added port range registers and the port range key element. Up to two
port range registers can be used for each filter, one for source port
and another for destination port.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/df4385a9592917e9a22ebff339e0463e4a8dfa82.1689092769.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mlxsw: spectrum_acl: Pass main driver structure to mlxsw_sp_acl_rulei_destroy()

The main driver structure will be needed in this function by a
subsequent patch, so pass it. No functional changes int

mlxsw: spectrum_acl: Pass main driver structure to mlxsw_sp_acl_rulei_destroy()

The main driver structure will be needed in this function by a
subsequent patch, so pass it. No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/24d96a4e21310e5de2951ace58263db35e44a0df.1689092769.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mlxsw: spectrum_port_range: Add devlink resource support

Expose via devlink-resource the maximum number of port range registers
and their current occupancy. Besides the observability benefits, this

mlxsw: spectrum_port_range: Add devlink resource support

Expose via devlink-resource the maximum number of port range registers
and their current occupancy. Besides the observability benefits, this
resource will be used by subsequent patches for scale and occupancy
tests.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/7945e0c715dc5efb1617f45f7560c1f1bd0bcf8a.1689092769.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mlxsw: spectrum_port_range: Add port range core

The Spectrum ASICs have a fixed number of port range registers, each of
which maintains the following parameters:

* Minimum and maximum port.
* Apply

mlxsw: spectrum_port_range: Add port range core

The Spectrum ASICs have a fixed number of port range registers, each of
which maintains the following parameters:

* Minimum and maximum port.
* Apply port range for source port, destination port or both.
* Apply port range for TCP, UDP or both.
* Apply port range for IPv4, IPv6 or both.

Implement a port range core which takes care of the allocation and
configuration of these registers and exposes an API that allows
in-driver consumers (e.g., the ACL code) to request matching on a range
of either source or destination port.

These registers are going to be used for port range matching in the
flower classifier that already matches on EtherType being IPv4 / IPv6 and
IP protocol being TCP / UDP. As such, there is no need to limit these
registers to a specific EtherType or IP protocol, which will increase
the likelihood of a register being shared by multiple flower filters.

It is unlikely that a filter will match on the same range of both source
and destination ports, which is why each register is only configured to
match on either source or destination port. If a filter requires
matching on a range of both source and destination ports, it will
utilize two port range registers and match on the output of both.

For efficient lookup and traversal, use XArray to store the allocated
port range registers. The XArray uses RCU and an internal spinlock to
synchronise access, so there is no need for a dedicate lock.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/674f00539a0072d455847663b5feb504db51a259.1689092769.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work fo

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.

Core:

- Rework the sendpage & splice implementations

Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES

Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is

Remove the MSG_SENDPAGE_NOTLAST flag completely

- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid

- Enable socket busy polling with CONFIG_RT

- Improve reliability and efficiency of reporting for ref_tracker

- Auto-generate a user space C library for various Netlink families

Protocols:

- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]

- Use per-VMA locking for "page-flipping" TCP receive zerocopy

- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags

- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative

- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)

- Avoid waking up applications using TLS sockets until we have a full
record

- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring

- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address

- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch

- PPPoE: make number of hash bits configurable

- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)

- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)

- Support matching on Connectivity Fault Management (CFM) packets

- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug

- HSR: don't enable promiscuous mode if device offloads the proto

- Support active scanning in IEEE 802.15.4

- Continue work on Multi-Link Operation for WiFi 7

BPF:

- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators

- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything

- Accept dynptr memory as memory arguments passed to helpers

- Add routing table ID to bpf_fib_lookup BPF helper

- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)

- Show target_{obj,btf}_id in tracing link fdinfo

- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

Netfilter:

- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value

- Increase ip_vs_conn_tab_bits range for 64BIT builds

- Allow updating size of a set

- Improve NAT tuple selection when connection is closing

Driver API:

- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)

- Support configuring rate selection pins of SFP modules

- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines

- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer

- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)

- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message

- Split devlink instance and devlink port operations

New hardware / drivers:

- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver

- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE

- CAN:
- Fintek F81604

Drivers:

- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10

- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)

- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of

- CAN: Kvaser PCIEcan:
- support packet timestamping

- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...

show more ...

Merge branch 'mlxsw-preparations-for-out-of-order-operations-patches'

Petr Machata says:

====================
mlxsw: Preparations for out-of-order-operations patches

The mlxsw driver currently mak

Merge branch 'mlxsw-preparations-for-out-of-order-operations-patches'

Petr Machata says:

====================
mlxsw: Preparations for out-of-order-operations patches

The mlxsw driver currently makes the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices need to be added to
the bridge before IP addresses are configured on that bridge or SVI added
on top of it. Enslaving a netdevice to another netdevice that already has
uppers is in fact forbidden by mlxsw for this reason. Despite this safety,
it is rather easy to get into situations where the offloaded configuration
is just plain wrong.

As an example, take a front panel port, configure an IP address: it gets a
RIF. Now enslave the port to a bridge, and the RIF is gone. Remove the
port from the bridge again, but the RIF never comes back. There is a number
of similar situations, where changing the configuration there and back
utterly breaks the offload.

Over the course of the following several patchsets, mlxsw code is going to
be adjusted to diminish the space of wrongly offloaded configurations.
Ideally the offload state will reflect the actual state, regardless of the
sequence of operation used to construct that state.

No functional changes are intended in this patchset yet. Rather the patches
prepare the codebase for easier introduction of functional changes in later
patchsets.

- In patch #1, extract a helper to join a RIF of a given port, if there is
one. In patch #2, use it in a newly-added helper to join a LAG interface.

- In patches #3, #4 and #5, add helpers that abstract away the rif->dev
access. This will make it simpler in the future to change the way the
deduction is done. In patch #6, do this for deduction from nexthop group
info to RIF.

- In patch #7, add a helper to destroy a RIF. So far RIF was destroyed
simply by kfree'ing it.

- In patch #8, add a helper to check if any IP addresses are configured on
a netdevice. This helper will be useful later.

- In patch #9, add a helper to migrate a RIF. This will be a convenient
place to put extensions later on.

- Patch #10 move IPIP initialization up to make ipip_ops_arr available
earlier.
====================

Link: https://lore.kernel.org/r/cover.1686581444.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

mlxsw: spectrum_router: Add a helper specifically for joining a LAG

Currently, joining a LAG very simply means that the LAG RIF should be
joined by the subport representing untagged traffic. If the

mlxsw: spectrum_router: Add a helper specifically for joining a LAG

Currently, joining a LAG very simply means that the LAG RIF should be
joined by the subport representing untagged traffic. If the RIF does not
exist, it does not have to be created: if the user wants there to be RIF
for the LAG device, they are supposed to add an IP address, and they are
supposed to do it after tha LAG becomes mlxsw upper.

We can also assume that the LAG has no uppers, otherwise the enslavement is
not allowed.

In the future, these ordering dependencies should be removed. That means
that joining LAG will be more complex operation, possibly involving a lazy
RIF creation, and possibly joining / lazily creating RIFs for VLAN uppers
of the LAG. It will be handy to have a dedicated function that handles all
this. The new function mlxsw_sp_router_port_join_lag() is that.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'mlxsw-cleanups'

Petr Machata says:

====================
mlxsw: Cleanups in router code

This patchset moves some router-related code from spectrum.c to
spectrum_router.c where it shou

Merge branch 'mlxsw-cleanups'

Petr Machata says:

====================
mlxsw: Cleanups in router code

This patchset moves some router-related code from spectrum.c to
spectrum_router.c where it should be. It also simplifies handlers of
netevent notifications.

- Patch #1 caches router pointer in a dedicated variable. This obviates the
need to access the same as mlxsw_sp->router, making lines shorter, and
permitting a future patch to add code that fits within 80 character
limit.

- Patch #2 moves IP / IPv6 validation notifier blocks from spectrum.c
to spectrum_router, where the handlers are anyway.

- In patch #3, pass router pointer to scheduler of deferred work directly,
instead of having it deduce it on its own.

- This makes the router pointer available in the handler function
mlxsw_sp_router_netevent_event(), so in patch #4, use it directly,
instead of finding it through mlxsw_sp_port.

- In patch #5, extend mlxsw_sp_router_schedule_work() so that the
NETEVENT_NEIGH_UPDATE handler can use it directly instead of inlining
equivalent code.

- In patches #6 and #7, add helpers for two common operations involving
a backing netdev of a RIF. This makes it unnecessary for the function
mlxsw_sp_rif_dev() to be visible outside of the router module, so in
patch #8, hide it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...