Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side a

Merge tag 'v6.6.76' into for/openbmc/dev-6.6

This is the 6.6.76 stable release

Conflicts:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Conflicts were resolved in favour of our side as the upstream stable
branches cherry-picked a small number of changes out of a much large
series, which has already been backported.

show more ...

net: hns3: fix oops when unload drivers paralleling

[ Upstream commit 92e5995773774a3e70257e9c95ea03518268bea5 ]

When unload hclge driver, it tries to disable sriov first for each
ae_dev node from

net: hns3: fix oops when unload drivers paralleling

[ Upstream commit 92e5995773774a3e70257e9c95ea03518268bea5 ]

When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.

But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.

To fixes it, introduce a new mutex to protect the unload process.

Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.52' into for/openbmc/dev-6.6

This is the 6.6.52 stable release

net: hns3: use correct release function during uninitialization

[ Upstream commit 7660833d217528c8f2385528951ab820a031e4e3 ]

pci_request_regions is called to apply for PCI I/O and memory resources

net: hns3: use correct release function during uninitialization

[ Upstream commit 7660833d217528c8f2385528951ab820a031e4e3 ]

pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.

Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.48' into for/openbmc/dev-6.6

This is the 6.6.48 stable release

net: hns3: use the user's cfg after reset

[ Upstream commit 30545e17eac1f50c5ef49644daf6af205100a965 ]

Consider the followed case that the user change speed and reset the net
interface. Before the

net: hns3: use the user's cfg after reset

[ Upstream commit 30545e17eac1f50c5ef49644daf6af205100a965 ]

Consider the followed case that the user change speed and reset the net
interface. Before the hw change speed successfully, the driver get old
old speed from hw by timer task. After reset, the previous speed is config
to hw. As a result, the new speed is configed successfully but lost after
PF reset. The followed pictured shows more dirrectly.

+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool -s 100G | |
+------------------>| set speed 100G |
| +--------------------->|
| | set successfully |
| |<---------------------+---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 200G | | changing event
| ethtool --reset |<---------------------+ | (100G)
+------------------>| cfg previous speed |<--+
| | after reset (200G) |
| +--------------------->|
| | +---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 100G | | changing event
| |<---------------------+ | (200G)
| | |<--+
| |query cfg (timer task)|
| +--------------------->|
| | return 200G |
| |<---------------------+
| | |
v v v

This patch save new speed if hw change speed successfully, which will be
used after reset successfully.

Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: fix wrong use of semaphore up

[ Upstream commit 8445d9d3c03101859663d34fda747f6a50947556 ]

Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process wil

net: hns3: fix wrong use of semaphore up

[ Upstream commit 8445d9d3c03101859663d34fda747f6a50947556 ]

Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.

So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.

Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.35' into dev-6.6

This is the 6.6.35 stable release

net: hns3: fix kernel crash problem in concurrent scenario

[ Upstream commit 12cda920212a49fa22d9e8b9492ac4ea013310a4 ]

When link status change, the nic driver need to notify the roce
driver to han

net: hns3: fix kernel crash problem in concurrent scenario

[ Upstream commit 12cda920212a49fa22d9e8b9492ac4ea013310a4 ]

When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.

To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.

Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.31' into dev-6.6

This is the 6.6.31 stable release

net: hns3: fix kernel crash when devlink reload during initialization

[ Upstream commit 35d92abfbad88cf947c010baf34b075e40566095 ]

The devlink reload process will access the hardware resources,
but

net: hns3: fix kernel crash when devlink reload during initialization

[ Upstream commit 35d92abfbad88cf947c010baf34b075e40566095 ]

The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.

This patch fixes this by registering the devlink after
hardware initialization.

Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: fix port vlan filter not disabled issue

[ Upstream commit f5db7a3b65c84d723ca5e2bb6e83115180ab6336 ]

According to hardware limitation, for device support modify
VLAN filter state but not

net: hns3: fix port vlan filter not disabled issue

[ Upstream commit f5db7a3b65c84d723ca5e2bb6e83115180ab6336 ]

According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.

To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".

Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: use appropriate barrier function after setting a bit value

[ Upstream commit 094c281228529d333458208fd02fcac3b139d93b ]

There is a memory barrier in followed case. When set the port down

net: hns3: use appropriate barrier function after setting a bit value

[ Upstream commit 094c281228529d333458208fd02fcac3b139d93b ]

There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().

CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)

pf also has this issue.

Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: release PTP resources if pf initialization failed

[ Upstream commit 950aa42399893a170d9b57eda0e4a3ff91fd8b70 ]

During the PF initialization process, hclge_update_port_info may return an

net: hns3: release PTP resources if pf initialization failed

[ Upstream commit 950aa42399893a170d9b57eda0e4a3ff91fd8b70 ]

During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.

Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: change type of numa_node_mask as nodemask_t

[ Upstream commit 6639a7b953212ac51aa4baa7d7fb855bf736cf56 ]

It provides nodemask_t to describe the numa node mask in kernel. To
improve trans

net: hns3: change type of numa_node_mask as nodemask_t

[ Upstream commit 6639a7b953212ac51aa4baa7d7fb855bf736cf56 ]

It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.

Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: using user configure after hardware reset

[ Upstream commit 05eb60e9648cca0beeebdbcd263b599fb58aee48 ]

When a reset occurring, it's supposed to recover user's configuration.
Currently, t

net: hns3: using user configure after hardware reset

[ Upstream commit 05eb60e9648cca0beeebdbcd263b599fb58aee48 ]

When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:

+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v

To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration

Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.26' into dev-6.6

This is the 6.6.26 stable release

net: hns3: fix kernel crash when devlink reload during pf initialization

[ Upstream commit 93305b77ffcb042f1538ecc383505e87d95aa05a ]

The devlink reload process will access the hardware resources,

net: hns3: fix kernel crash when devlink reload during pf initialization

[ Upstream commit 93305b77ffcb042f1538ecc383505e87d95aa05a ]

The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash. This patch fixes this by taking devl_lock during initialization.

Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

net: hns3: fix port duplex configure error in IMP reset

[ Upstream commit 11d80f79dd9f871a52feba4bf24b5ac39f448eb7 ]

Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_i

net: hns3: fix port duplex configure error in IMP reset

[ Upstream commit 11d80f79dd9f871a52feba4bf24b5ac39f448eb7 ]

Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool, so it may cause the user
configuration dropped after reset.

To fix it, don't change the duplex mode when resetting.

Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

net: hns3: fix VF wrong speed and duplex issue

[ Upstream commit dff655e82faffc287d4a72a59f66fa120bf904e4 ]

If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries

net: hns3: fix VF wrong speed and duplex issue

[ Upstream commit dff655e82faffc287d4a72a59f66fa120bf904e4 ]

If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries the port information from firmware.

After imp reset command is executed, PF status changes to down,
and PF will query link status and updates port information
from firmware in a periodic scheduled task.

However, there is a low probability that port information is updated
when PF is down, and then PF link status changes to up.
In this case, PF synchronizes incorrect rate and duplex mode to VF.

This patch fixes it by updating port information before
PF synchronizes the rate and duplex to the VF
when PF changes to up.

Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: fix incorrect capability bit display for copper port

[ Upstream commit 75b247b57d8b71bcb679e4cb37d0db104848806c ]

Currently, the FEC capability bit is default set for device version V2.

net: hns3: fix incorrect capability bit display for copper port

[ Upstream commit 75b247b57d8b71bcb679e4cb37d0db104848806c ]

Currently, the FEC capability bit is default set for device version V2.
It's incorrect for the copper port. Eventhough it doesn't make the nic
work abnormal, but the capability information display in debugfs may
confuse user. So clear it when driver get the port type inforamtion.

Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: hns3: fix add VLAN fail issue

[ Upstream commit 472a2ff63efb30234cbf6b2cdaf8117f21b4f8bc ]

The hclge_sync_vlan_filter is called in periodic task,
trying to remove VLAN from vlan_del_fail_bmap.

net: hns3: fix add VLAN fail issue

[ Upstream commit 472a2ff63efb30234cbf6b2cdaf8117f21b4f8bc ]

The hclge_sync_vlan_filter is called in periodic task,
trying to remove VLAN from vlan_del_fail_bmap. It can
be concurrence with VLAN adding operation from user.
So once user failed to delete a VLAN id, and add it
again soon, it may be removed by the periodic task,
which may cause the software configuration being
inconsistent with hardware. So add mutex handling
to avoid this.

user hns3 driver

periodic task
│
add vlan 10 ───── hns3_vlan_rx_add_vid │
│ (suppose success) │
│ │
del vlan 10 ───── hns3_vlan_rx_kill_vid │
│ (suppose fail,add to │
│ vlan_del_fail_bmap) │
│ │
add vlan 10 ───── hns3_vlan_rx_add_vid │
(suppose success) │
foreach vlan_del_fail_bmp
del vlan 10

Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.

Current release - regressions

Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.

Current release - regressions:

- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE

- netfilter: fix entries val in rule reset audit log

- eth: stmmac: fix incorrect rxq|txq_stats reference

Previous releases - regressions:

- ipv4: fix null-deref in ipv4_link_failure

- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP

- eth: team: fix null-ptr-deref when team device type is changed

- eth: i40e: fix VF VLAN offloading when port VLAN is configured

- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB

Previous releases - always broken:

- core: fix ETH_P_1588 flow dissector

- mptcp: fix several connection hang-up conditions

- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach

- hsr: properly parse HSRv1 supervisor frames.

- eth: igc: fix infinite initialization loop with early XDP redirect

- eth: octeon_ep: fix tx dma unmap len values in SG

- eth: hns3: fix GRE checksum offload issue"

* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...

show more ...