Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

dpaa2-eth: increase the needed headroom to account for alignment

[ Upstream commit f422abe3f23d483cf01f386819f26fb3fe0dbb2b ]

Increase the needed headroom to account for a 64 byte alignment
restric

dpaa2-eth: increase the needed headroom to account for alignment

[ Upstream commit f422abe3f23d483cf01f386819f26fb3fe0dbb2b ]

Increase the needed headroom to account for a 64 byte alignment
restriction which, with this patch, we make mandatory on the Tx path.
The case in which the amount of headroom needed is not available is
already handled by the driver which instead sends a S/G frame with the
first buffer only holding the SW and HW annotation areas.

Without this patch, we can empirically see data corruption happening
between Tx and Tx confirmation which sometimes leads to the SW
annotation area being overwritten.

Since this is an old IP where the hardware team cannot help to
understand the underlying behavior, we make the Tx alignment mandatory
for all frames to avoid the crash on Tx conf. Also, remove the comment
that suggested that this is just an optimization.

This patch also sets the needed_headroom net device field to the usual
value that the driver would need on the Tx path:
- 64 bytes for the software annotation area
- 64 bytes to account for a 64 byte aligned buffer address

Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver")
Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commit

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).

The main changes are:

1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann

2) Support new insns from cpu v4 from Yonghong Song

3) Non-atomically allocate freelist during prefill from YiFei Zhu

4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu

5) Add tracepoint to xdp attaching failure from Leon Hwang

6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================

Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'net: struct netdev_rx_queue and xdp.h reshuffling'

Jakub Kicinski says:

====================
While poking at struct netdev_rx_queue I got annoyed by
the huge rebuild times. I split it

Merge branch 'net: struct netdev_rx_queue and xdp.h reshuffling'

Jakub Kicinski says:

====================
While poking at struct netdev_rx_queue I got annoyed by
the huge rebuild times. I split it out from netdevice.h
and then realized that it was the main reason we included
xdp.h in there. So I removed that dependency as well.

This gives us very pleasant build times for both xdp.h
and struct netdev_rx_queue changes.

I'm sending this for bpf-next because I think it'd be easiest
if it goes in there, and then bpf-next gets flushed soon after?
I can also make a branch on merge-base for net-next and bpf-next..

v2:
- build fix
- reorder some includes
v1: https://lore.kernel.org/all/20230802003246.2153774-1-kuba@kernel.org/
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

eth: add missing xdp.h includes in drivers

Handful of drivers currently expect to get xdp.h by virtue
of including netdevice.h. This will soon no longer be the case
so add explicit includes.

Review

eth: add missing xdp.h includes in drivers

Handful of drivers currently expect to get xdp.h by virtue
of including netdevice.h. This will soon no longer be the case
so add explicit includes.

Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-fixes into drm-misc-fixes

Let's start the fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type propert

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),

Merge remote-tracking branch 'torvalds/master' into perf/core

To resolve a trivial merge conflict with c302378bc157f6a7 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),
where a function present upstream was removed in the perf tools
development tree.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'main' into zstd-linus

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Allow live renaming when an interface is up

- Ad

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Allow live renaming when an interface is up

- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations

- Add inet drop monitor support

- A few GRO performance improvements

- Add infrastructure for atomic dev stats, addressing long standing
data races

- De-duplicate common code between OVS and conntrack offloading
infrastructure

- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

- Netfilter: introduce packet parser for tunneled packets

- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs

- Add the helper support for connection-tracking OVS offload

BPF:

- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF

- Make cgroup local storage available to non-cgroup attached BPF
programs

- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers

- A relevant bunch of BPF verifier fixes and improvements

- Veristat tool improvements to support custom filtering, sorting,
and replay of results

- Add LLVM disassembler as default library for dumping JITed code

- Lots of new BPF documentation for various BPF maps

- Add bpf_rcu_read_{,un}lock() support for sleepable programs

- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs

- Add support storing struct task_struct objects as kptrs in maps

- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values

- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

Protocols:

- TCP: implement Protective Load Balancing across switch links

- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path

- UDP: Introduce optional per-netns hash lookup table

- IPv6: simplify and cleanup sockets disposal

- Netlink: support different type policies for each generic netlink
operation

- MPTCP: add MSG_FASTOPEN and FastOpen listener side support

- MPTCP: add netlink notification support for listener sockets events

- SCTP: add VRF support, allowing sctp sockets binding to VRF devices

- Add bridging MAC Authentication Bypass (MAB) support

- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios

- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage

- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading

- IPSec: extended ack support for more descriptive XFRM error
reporting

- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking

- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks

- Tun: bump the link speed from 10Mbps to 10Gbps

- Tun/VirtioNet: implement UDP segmentation offload support

Driver API:

- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels

- New API for netdev <-> devlink_port linkage

- PTP: convert existing drivers to new frequency adjustment
implementation

- DSA: add support for rx offloading

- Autoload DSA tagging driver when dynamically changing protocol

- Add new PCP and APPTRUST attributes to Data Center Bridging

- Add configuration support for 800Gbps link speed

- Add devlink port function attribute to enable/disable RoCE and
migratable

- Extend devlink-rate to support strict prioriry and weighted fair
queuing

- Add devlink support to directly reading from region memory

- New device tree helper to fetch MAC address from nvmem

- New big TCP helper to simplify temporary header stripping

New hardware / drivers:

- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter

- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S

- PTP:
- Orolia ART-CARD

- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices

- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device

Drivers:

- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support

- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default

- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support

- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series

- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan

- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support

- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support

- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...

show more ...

Merge branch 'fix-rtnl_mutex-deadlock-with-dpaa2-and-sfp-modules'

Vladimir Oltean says:

====================
Fix rtnl_mutex deadlock with DPAA2 and SFP modules

This patch set deliberately targets

Merge branch 'fix-rtnl_mutex-deadlock-with-dpaa2-and-sfp-modules'

Vladimir Oltean says:

====================
Fix rtnl_mutex deadlock with DPAA2 and SFP modules

This patch set deliberately targets net-next and lacks Fixes: tags due
to caution on my part.

While testing some SFP modules on the Solidrun Honeycomb LX2K platform,
I noticed that rebooting causes a deadlock:

============================================
WARNING: possible recursive locking detected
6.1.0-rc5-07010-ga9b9500ffaac-dirty #656 Not tainted
--------------------------------------------
systemd-shutdow/1 is trying to acquire lock:
ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30

but task is already holding lock:
ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30

other info that might help us debug this:
Possible unsafe locking scenario:

CPU0
----
lock(rtnl_mutex);
lock(rtnl_mutex);

*** DEADLOCK ***

May be due to missing lock nesting notation

6 locks held by systemd-shutdow/1:
#0: ffffa62db6863c70 (system_transition_mutex){+.+.}-{4:4}, at: __do_sys_reboot+0xd4/0x260
#1: ffff2f2b0176f100 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xf4/0x260
#2: ffff2f2b017be900 (&dev->mutex){....}-{4:4}, at: device_shutdown+0x104/0x260
#3: ffff2f2b017680f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260
#4: ffff2f2b0e1608f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260
#5: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30

stack backtrace:
CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-rc5-07010-ga9b9500ffaac-dirty #656
Hardware name: SolidRun LX2160A Honeycomb (DT)
Call trace:
lock_acquire+0x68/0x84
__mutex_lock+0x98/0x460
mutex_lock_nested+0x2c/0x40
rtnl_lock+0x1c/0x30
sfp_bus_del_upstream+0x1c/0xac
phylink_destroy+0x1c/0x50
dpaa2_mac_disconnect+0x28/0x70
dpaa2_eth_remove+0x1dc/0x1f0
fsl_mc_driver_remove+0x24/0x60
device_remove+0x70/0x80
device_release_driver_internal+0x1f0/0x260
device_links_unbind_consumers+0xe0/0x110
device_release_driver_internal+0x138/0x260
device_release_driver+0x18/0x24
bus_remove_device+0x12c/0x13c
device_del+0x16c/0x424
fsl_mc_device_remove+0x28/0x40
__fsl_mc_device_remove+0x10/0x20
device_for_each_child+0x5c/0xac
dprc_remove+0x94/0xb4
fsl_mc_driver_remove+0x24/0x60
device_remove+0x70/0x80
device_release_driver_internal+0x1f0/0x260
device_release_driver+0x18/0x24
bus_remove_device+0x12c/0x13c
device_del+0x16c/0x424
fsl_mc_bus_remove+0x8c/0x10c
fsl_mc_bus_shutdown+0x10/0x20
platform_shutdown+0x24/0x3c
device_shutdown+0x15c/0x260
kernel_restart+0x40/0xa4
__do_sys_reboot+0x1e4/0x260
__arm64_sys_reboot+0x24/0x30

But fixing this appears to be not so simple. The patch set represents my
attempt to address it.

In short, the problem is that dpaa2_mac_connect() and dpaa2_mac_disconnect()
call 2 phylink functions in a row, one takes rtnl_lock() itself -
phylink_create(), and one which requires rtnl_lock() to be held by the
caller - phylink_fwnode_phy_connect(). The existing approach in the
drivers is too simple. We take rtnl_lock() when calling dpaa2_mac_connect(),
which is what results in the deadlock.

Fixing just that creates another problem. The drivers make use of
rtnl_lock() for serializing with other code paths too. I think I've
found all those code paths, and established other mechanisms for
serializing with them.
====================

Link: https://lore.kernel.org/r/20221129141221.872653-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: dpaa2-eth: serialize changes to priv->mac with a mutex

The dpaa2 architecture permits dynamic connections between objects on
the fsl-mc bus, specifically between a DPNI object (represented by a

net: dpaa2-eth: serialize changes to priv->mac with a mutex

The dpaa2 architecture permits dynamic connections between objects on
the fsl-mc bus, specifically between a DPNI object (represented by a
struct net_device) and a DPMAC object (represented by a struct phylink).

The DPNI driver is notified when those connections are created/broken
through the dpni_irq0_handler_thread() method. To ensure that ethtool
operations, as well as netdev up/down operations serialize with the
connection/disconnection of the DPNI with a DPMAC,
dpni_irq0_handler_thread() takes the rtnl_lock() to block those other
operations from taking place.

There is code called by dpaa2_mac_connect() which wants to acquire the
rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() ->
sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite
work out, even though it's fairly simple.

Create a different strategy, where all code paths in the dpaa2-eth
driver access priv->mac only while they are holding priv->mac_lock.
The phylink instance is not created or connected to the PHY under the
priv->mac_lock, but only assigned to priv->mac then. This will eliminate
the reliance on the rtnl_mutex.

Add lockdep annotations and put comments where holding the lock is not
necessary, and priv->mac can be dereferenced freely.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: dpaa2: replace dpaa2_mac_is_type_fixed() with dpaa2_mac_is_type_phy()

dpaa2_mac_is_type_fixed() is a header with no implementation and no
callers, which is referenced from the documentation tho

net: dpaa2: replace dpaa2_mac_is_type_fixed() with dpaa2_mac_is_type_phy()

dpaa2_mac_is_type_fixed() is a header with no implementation and no
callers, which is referenced from the documentation though. It can be
deleted.

On the other hand, it would be useful to reuse the code between
dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
code should be called dpaa2_mac_is_type_phy(), so let's create that.

The removal and the addition are merged into the same patch because,
in fact, is_type_phy() is the logical opposite of is_type_fixed().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'dpaa2-eth-AF_XDP-zc'

Ioana Ciornei says:

====================
net: dpaa2-eth: AF_XDP zero-copy support

This patch set adds support for AF_XDP zero-copy in the dpaa2-eth
driver. The s

Merge branch 'dpaa2-eth-AF_XDP-zc'

Ioana Ciornei says:

====================
net: dpaa2-eth: AF_XDP zero-copy support

This patch set adds support for AF_XDP zero-copy in the dpaa2-eth
driver. The support is available on the LX2160A SoC and its variants and
only on interfaces (DPNIs) with a maximum of 8 queues (HW limitations
are the root cause).

We are first implementing the .get_channels() callback since this a
dependency for further work.

Patches 2-3 are working on making the necessary changes for multiple
buffer pools on a single interface. By default, without an AF_XDP socket
attached, only a single buffer pool will be used and shared between all
the queues. The changes in the functions are made in this patch, but the
actual allocation and setup of a new BP is done in patch#10.

Patches 4-5 are improving the information exposed in debugfs. We are
exposing a new file to show which buffer pool is used by what channels
and how many buffers it currently has.

The 6th patch updates the dpni_set_pools() firmware API so that we are
capable of setting up a different buffer per queue in later patches.

In the 7th patch the generic dev_open/close APIs are used instead of the
dpaa2-eth internal ones.

Patches 8-9 are rearranging the existing code in dpaa2-eth.c in order to
create new functions which will be used in the XSK implementation in
dpaa2-xsk.c

Finally, the last 3 patches are adding the actual support for both the
Rx and Tx path of AF_XDP zero-copy and some associated tracepoints.
Details on the implementation can be found in the actual patch.

Changes in v2:
- 3/12: Export dpaa2_eth_allocate_dpbp/dpaa2_eth_free_dpbp in this
patch to avoid a build warning. The functions will be used in next
patches.
- 6/12: Use __le16 instead of u16 for the dpbp_id field.
- 12/12: Use xdp_buff->data_hard_start when tracing the BP seeding.

Changes in v3:
- 3/12: fix leaking of bp on error path
====================

Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-eth: AF_XDP TX zero copy support

Add support in dpaa2-eth for packet processing on the Tx path using
AF_XDP zero copy mode.

The newly added dpaa2_xsk_tx() function will handle enqueuing

net: dpaa2-eth: AF_XDP TX zero copy support

Add support in dpaa2-eth for packet processing on the Tx path using
AF_XDP zero copy mode.

The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx
packets into the appropriate queue and update any necessary statistics.

On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles
creating a Scatter-Gather frame descriptor with only one data buffer.
This is needed because otherwise we would need to impose a headroom in
the Tx buffer to store our software annotation structures.
This tactic is already used on the normal data path of the dpaa2-eth
driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle
functions in order to allocate and recycle the Scatter-Gather table
buffers.

In case we have reached the maximum number of Tx XSK packets to be sent
in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be
rescheduled again.

On the XSK Tx confirmation path, we are just unmapping the SGT buffer
and recycle it for further use.

Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-eth: AF_XDP RX zero copy support

This patch adds the support for receiving packets via the AF_XDP
zero-copy mechanism in the dpaa2-eth driver. The support is available
only on the LX2160A

net: dpaa2-eth: AF_XDP RX zero copy support

This patch adds the support for receiving packets via the AF_XDP
zero-copy mechanism in the dpaa2-eth driver. The support is available
only on the LX2160A SoC and variants because we are relying on the HW
capability to associate a buffer pool to a specific queue (QDBIN), only
available on newer WRIOP versions.

On the control path, the dpaa2_xsk_enable_pool() function is responsible
to allocate a buffer pool (BP), setup this new BP to be used only on the
requested queue and change the consume function to point to the XSK ZC
one.
We are forced to call dev_close() in order to change the queue to buffer
pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our
favor since at dev_close() the buffer pools will be drained and at the
later dev_open() call they will be again seeded, this time with buffers
allocated from the XSK pool if needed.

On the data path, a new software annotation type is defined to be used
only for the XSK scenarios. This will enable us to pass keep necessary
information about a packet buffer between the moment in which it was
seeded and when it's received by the driver. In the XSK case, we are
keeping the associated xdp_buff.
Depending on the action returned by the BPF program, we will do the
following:
- XDP_PASS: copy the contents of the packet into a brand new skb,
recycle the initial buffer.
- XDP_TX: just enqueue the same frame descriptor back into the Tx path,
the buffer will get automatically released into the initial BP.
- XDP_REDIRECT: call xdp_do_redirect() and exit.

Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-eth: create and export the dpaa2_eth_receive_skb() function

Carve out code from the dpaa2_eth_rx() function in order to create and
export the dpaa2_eth_receive_skb() function. Do this in

net: dpaa2-eth: create and export the dpaa2_eth_receive_skb() function

Carve out code from the dpaa2_eth_rx() function in order to create and
export the dpaa2_eth_receive_skb() function. Do this in order to reuse
this code also from the XSK path which will be introduced in a later
patch.

Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dpaa2-eth: create and export the dpaa2_eth_alloc_skb function

The dpaa2_eth_alloc_skb() function is added by moving code from the
dpaa2_eth_copybreak() previously defined function. What the new

net: dpaa2-eth: create and export the dpaa2_eth_alloc_skb function

The dpaa2_eth_alloc_skb() function is added by moving code from the
dpaa2_eth_copybreak() previously defined function. What the new API does
is to allocate a new skb, copy the frame data from the passed FD to the
new skb and then return the skb.
Export this new function since we'll need the this functionality also
from the XSK code path.

Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...