Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge branch 'i2c/for-current' into i2c/for-mergewindow

This should have been in 6.3, but sadly I missed it.

Merge branch 'v6.3-rc7'

Sync with the urgent patches; in particular:

a53ce18cacb4 ("sched/fair: Sanitize vruntime of entity being migrated")

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Add support for Rockchip RK860X regulators

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This patch series introduces support for the Rockchip RK860X regulators,
while al

Add support for Rockchip RK860X regulators

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This patch series introduces support for the Rockchip RK860X regulators,
while also providing a few fixes and improvements to the existing fan53555
driver.

RK8600/RK8601 are quite similar to the FAN53555 regulators.

RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used
in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU.

show more ...

Merge 6.3-rc6 into usb-next

We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:

drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.

Merge 6.3-rc6 into usb-next

We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:

drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 6.3-rc6 into tty-next

We need the tty/serial fixes in here for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.3-rc6 into char-misc-next

We need it here to apply other char/misc driver changes to.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'iommufd/for-rc' into for-next

The following selftest patch requires both the bug fixes and the
improvements of the selftest framework.

* iommufd/for-rc:
iommufd: Do not corrupt the

Merge branch 'iommufd/for-rc' into for-next

The following selftest patch requires both the bug fixes and the
improvements of the selftest framework.

* iommufd/for-rc:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
Linux 6.3-rc5

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge 6.3-rc5 into driver-core-next

We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxf

Merge 6.3-rc5 into driver-core-next

We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts:

drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts:

drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
"Raw NAND controller driver fixes:

- meson:
- Invalidate ca

Merge tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
"Raw NAND controller driver fixes:

- meson:
- Invalidate cache on polling ECC bit
- Initialize struct with zeroes

- nandsim: Artificially prevent sequential page reads

ECC engine driver fixes:

- mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is
used

Binging fixes:

- jedec,spi-nor: Document CPOL/CPHA support"

* tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: meson: invalidate cache on polling ECC bit
mtd: rawnand: nandsim: Artificially prevent sequential page reads
dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used
mtd: rawnand: meson: initialize struct with zeroes

show more ...

mtd: rawnand: nandsim: Artificially prevent sequential page reads

The continuous read support added recently makes nandsim
unhappy. Indeed, all the supported commands should be re-encoded into
inter

mtd: rawnand: nandsim: Artificially prevent sequential page reads

The continuous read support added recently makes nandsim
unhappy. Indeed, all the supported commands should be re-encoded into
internal commands, so of course there is currently no support for the
commands and patterns needed for continuous reads to work.

I tried to add support for them but nandsim (which is more a tool to
develop/debug upper layers rather than the raw NAND core) suffers from a
big limitation: it's internal parser needs to know what exact operation
is happening when the address cycles are performed. The research is then
sequential from the start up to the address cycles, but does not check
what's coming next even though the information is available. This is a
limitation which is related to the old API used by the core which kind
of forced the controllers to guess what operation was being performed
rather early. Today the core uses a more transparent API called
->exec_op() which no longer requires controller drivers to do any more
guessing, but despite being updated to ->exec_op(), nandsim is still a
bit constrained on this regard and thus cannot handle sequential page
reads because the start sequence beginning is identical to a regular
page read.

If the internal algorithm is updated some day, it should be possible to
make it support sequential page reads by adding something like:

/* Large page devices continuous read page start */
{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART,
STATE_CMD_READCACHESEQ | ACTION_CPY, STATE_DATAOUT,
STATE_READY}},
/* Large page devices continuous read page continue */
{OPT_LARGEPAGE, {STATE_CMD_READCACHESEQ | ACTION_CPY_NEXT, STATE_DATAOUT,
STATE_READY}},
/* Large page devices continuous read page end */
{OPT_LARGEPAGE, {STATE_CMD_READCACHEEND | ACTION_CPY_NEXT, STATE_DATAOUT,
STATE_READY}},

For now, we just return -EOPNOTSUPP when the core asks controller
drivers if they support the feature in order to prevent any further use
of these opcodes.

Note: This is a hack, ->exec_op() is not supposed to check against the
COMMAND opcodes unless _really_ needed.

Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/linux-mtd/fd34fe55-7f4a-030d-8653-9bb9cf08410d@huawei.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/linux-mtd/20230310085452.1368716-1-miquel.raynal@bootlin.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.