Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

media: rkisp1: Fix IRQ handling due to shared interrupts

[ Upstream commit ffb635bb398fc07cb38f8a7b4a82cbe5f412f08e ]

The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers ca

media: rkisp1: Fix IRQ handling due to shared interrupts

[ Upstream commit ffb635bb398fc07cb38f8a7b4a82cbe5f412f08e ]

The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers can be called at any time. If such a call happens while the ISP
is powered down, the SoC will hang as the driver tries to access the
ISP registers.

This can be reproduced even without the platform sharing the IRQ line:
Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will
hang.

Fix this by adding a new field, 'irqs_enabled', which is used to bail
out from the interrupt handler when the ISP is not operational.

Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-2-173007628248@ideasonboard.com

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

media: rkisp1: Fix IRQ disable race issue

[ Upstream commit 870565f063a58576e8a4529f122cac4325c6b395 ]

In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparen

media: rkisp1: Fix IRQ disable race issue

[ Upstream commit 870565f063a58576e8a4529f122cac4325c6b395 ]

In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.

This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.

It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.

Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com

Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9

Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913

- new Intel IVSC MEI drivers

- some Mediatek platform drivers were moved to a common location

- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed

- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7

- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime

- a new ipu-bridge logic was added to work with IVSC MEI drivers

- venus driver gained better support for new VPU versions

- the v4l core async framework has gained lots of improvements and
cleanups

- lots of other cleanups, improvements and driver fixes

* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...

show more ...

media: v4l: async: Obtain async connection based on sub-device

Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with

media: v4l: async: Obtain async connection based on sub-device

Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with their
own information on an external sub-device.

The relation between connections and sub-devices still remains 1:1 but
this code becomes more complex when the relation soon changes.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge branch 'for-next' into for-linus

Merge branch 'main' into zstd-linus

Merge branch 'for-6.2/default-remove-cleanup' into for-linus

- removal of superfluous hid_hw_stop() calls for drivers with default
.remove callback (Marcus Folkesson)

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:

- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588

There's more cross tree updates than usual, though all fairly minor:

- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.

Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.

show more ...

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

show more ...

Merge tag 'v6.1-rc4' into spi-6.2

Linux 6.1-rc4 which should get my CI working on RPi3s again.

Merge tag 'v6.1-rc4' into regulator-6.2

Linux 6.1-rc4 which should get my CI working on RPi3s again.

Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts

Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:

# upstream:
debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.

Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts

Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:

# upstream:
debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file")

# retbleed work in x86/core:
5d8213864ade ("x86/retbleed: Add SKL return thunk")

... and these commits in include/linux/bpf.h:

# upstram:
18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")

# x86/core commits:
931ab63664f0 ("x86/ibt: Implement FineIBT")
bea75b33895f ("x86/Kconfig: Introduce function padding")

The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.

Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge 6.1-rc6 into driver-core-next

We need the kernfs changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer

ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer speaker. We should control HPF/LPF to output the
proper frequency for the different speakers. If the codec driver got
the BQ parameters from the device property, it will apply these
parameters to the hardware.

show more ...

Merge branch 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Long Li says:

====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev p

Merge branch 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Long Li says:

====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]

The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.

* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Define data structures for protection domain and memory registration
net: mana: Define data structures for allocating doorbell page from GDMA
net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
net: mana: Define max values for SGL entries
net: mana: Move header files to a common location
net: mana: Record port number in netdev
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Set the DMA device max segment size
net: mana: Handle vport sharing between devices
net: mana: Record the physical address for doorbell page region
net: mana: Add support for auxiliary device
====================

Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging drm/drm-next to get the latest changes in the xlnx driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'v6.1-rc2' into fixes

Merge rc2 into our fixes branch, which was based on rc1 but wasn't
merged until rc3, so that for the remainder of the release our fixes
branch will be based on rc2 fo

Merge tag 'v6.1-rc2' into fixes

Merge rc2 into our fixes branch, which was based on rc1 but wasn't
merged until rc3, so that for the remainder of the release our fixes
branch will be based on rc2 for the purposes of resolving conflicts with
other trees (if necessary).

show more ...