Merge tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

- driver fixes due to incorrect fwnode_handle_put() call

Merge tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

- driver fixes due to incorrect fwnode_handle_put() call

- bt8xx: bttv_risc_packed(): remove field checks

- vb2: frame_vector.c: replace WARN_ONCE with a comment

- imx219: a couple typo fixes and perform a full mode set
unconditionally

- uvcvideo: Fix OOB read

- some dependency fixes

* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
media: vb2: frame_vector.c: replace WARN_ONCE with a comment
media: uvcvideo: Fix OOB read
media: bt8xx: bttv_risc_packed(): remove field checks
media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
media: i2c: imx219: Perform a full mode set unconditionally
media: i2c: imx219: Fix crop rectangle setting when changing format
media: i2c: imx219: Fix a typo referring to a wrong variable
media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
media: ivsc: Depend on VIDEO_DEV
media: via: Use correct dependency for camera sensor drivers
media: v4l: Use correct dependency for camera sensor drivers
media: pci: ivsc: Select build dependencies

show more ...

media: bt8xx: bttv_risc_packed(): remove field checks

Do not turn on the vcr_hack based on the btv->field value.

This was a change in the bttv vb2 conversion that caused
green lines at the bottom o

media: bt8xx: bttv_risc_packed(): remove field checks

Do not turn on the vcr_hack based on the btv->field value.

This was a change in the bttv vb2 conversion that caused
green lines at the bottom of the picture in tvtime.

It was originally added to the vb2 conversion based on
faulty information that without this there would be glitches
in the video. However, later tests suggest that this is a
problem in the utilities used to test this since tvtime
behaves fine.

This patch reverts the bttv driver to the original pre-vb2
behavior w.r.t. vcr_hack.

Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9

Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913

- new Intel IVSC MEI drivers

- some Mediatek platform drivers were moved to a common location

- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed

- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7

- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime

- a new ipu-bridge logic was added to work with IVSC MEI drivers

- venus driver gained better support for new VPU versions

- the v4l core async framework has gained lots of improvements and
cleanups

- lots of other cleanups, improvements and driver fixes

* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

media: bttv: convert to vb2

Convert this driver from the old videobuf framework to videobuf2.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-ci

media: bttv: convert to vb2

Convert this driver from the old videobuf framework to videobuf2.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: refactor bttv_set_dma()

Break bttv_set_dma() into several smaller, separate functions so it is
easier to read the risc and dma code. Replace numeric values with
descriptive macros. Also

media: bttv: refactor bttv_set_dma()

Break bttv_set_dma() into several smaller, separate functions so it is
easier to read the risc and dma code. Replace numeric values with
descriptive macros. Also remove the unused field btv->cap_ctl.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: move vbi_skip/vbi_count out of buffer

Instead of storing vbi_skip and vbi_count in each bttv buffer separately,
move them to the main bttv struct as they won't change per buffer.

Signe

media: bttv: move vbi_skip/vbi_count out of buffer

Instead of storing vbi_skip and vbi_count in each bttv buffer separately,
move them to the main bttv struct as they won't change per buffer.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: remove crop info from bttv_buffer

Instead of storing the cropping parameters in each bttv buffer separately,
just use the global bttv crop because it won't change per buffer.

Signed-of

media: bttv: remove crop info from bttv_buffer

Instead of storing the cropping parameters in each bttv buffer separately,
just use the global bttv crop because it won't change per buffer.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: remove tvnorm field from bttv_buffer

Instead of storing the tvnorm in each bttv buffer separately, just use the
global bttv tvnorm because the tvnorm does not change per buffer.

Signed

media: bttv: remove tvnorm field from bttv_buffer

Instead of storing the tvnorm in each bttv buffer separately, just use the
global bttv tvnorm because the tvnorm does not change per buffer.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: remove format field from bttv_buffer

Instead of storing the format (video or vbi) in each bttv buffer
separately, just use the global bttv format because the format does not
change per

media: bttv: remove format field from bttv_buffer

Instead of storing the format (video or vbi) in each bttv buffer
separately, just use the global bttv format because the format does not
change per buffer.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: bttv: replace BUG with WARN_ON

Both BUG and BUG_ON are replaced with WARN_ON wherever they would still be
present after the vb2 conversion. WARN_ON is sufficient in these cases.

Signed-off-b

media: bttv: replace BUG with WARN_ON

Both BUG and BUG_ON are replaced with WARN_ON wherever they would still be
present after the vb2 conversion. WARN_ON is sufficient in these cases.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- Removal of some old unused sensor drivers: ad9389b, m

Merge tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- Removal of some old unused sensor drivers: ad9389b, m5mols, mt9m032,
mt9t001, noon010pc30, s5k6aa, sr030pc30 and vs6624

- New i.MX8 image sensor interface driver

- Some new RC keymaps

- lots of cleanups at atomisp driver to make it support standard
features present on other webcam drivers

- the cx18 and saa7146 now uses VB2

- lots of cleanups and driver improvements

* tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (460 commits)
media: ov5670: Fix probe on ACPI
media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
media: nxp: imx8-isi: Replace udelay() with fsleep()
media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
media: nxp: Add i.MX8 ISI driver
media: dt-bindings: media: Add i.MX8 ISI DT bindings
media: atomisp: gmin_platform: Add Lenovo Ideapad Miix 310 gmin_vars
media: atomisp: gmin_platform: Make DMI quirks take precedence over the _DSM table
media: atomisp: Remove struct atomisp_sub_device index field
media: atomisp: Drop support for streaming from 2 sensors at once
media: atomisp: Remove atomisp_try_fmt() call from atomisp_set_fmt()
media: atomisp: Remove unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
media: atomisp: Remove snr_mbus_fmt local var from atomisp_try_fmt()
media: atomisp: Remove custom V4L2_CID_FMT_AUTO control
media: atomisp: Remove continuous mode related code from atomisp_set_fmt()
media: atomisp: Remove duplicate atomisp_[start|stop]_streaming() prototypes
media: atomisp: gc0310: Switch over to ACPI powermanagement
media: atomisp: gc0310: Use devm_kzalloc() for data struct
media: atomisp: gc0310: Add runtime-pm support
media: atomisp: gc0310: Delay power-on till streaming is started
...

show more ...

media: bttv: drop overlay support

Destructive overlay support (i.e. where the video frame is DMA-ed
straight into a framebuffer) is effectively dead. It was a
necessary evil in the early days when c

media: bttv: drop overlay support

Destructive overlay support (i.e. where the video frame is DMA-ed
straight into a framebuffer) is effectively dead. It was a
necessary evil in the early days when computers were not fast enough
to copy SDTV video frames around, but today that's no longer a problem.

It requires access to the framebuffer memory, which is a bad idea and
very hard to do safely. In addition, in drm it is today almost
impossible to get hold of the framebuffer address.

So drop support for this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

Merge remote-tracking branch 'net/master'

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.